AnyEvent::Impl:UserlContributed Perl DocuAnyEvent::Impl::Perl(3p)


NAME
       AnyEvent::Impl::Perl - Pure-Perl event loop and AnyEvent adaptor for
       itself

SYNOPSIS
          use AnyEvent;
          # use AnyEvent::Impl::Perl;

          # this module gets loaded automatically as required

          # Explicit use:
          use AnyEvent::Impl::Perl;
          use AnyEvent;

          ...

          AnyEvent::Impl::Perl::loop; # run the event loop

DESCRIPTION
       This module provides transparent support for AnyEvent in case no other
       event loop could be found or loaded. You don't have to do anything to
       make it work with AnyEvent except by possibly loading it before
       creating the first AnyEvent watcher.

       If you want to use this module instead of autoloading another event
       loop you can simply load it before creating the first watcher.

       As for performance, this module is on par with (and usually faster
       than) most select/poll-based C event modules such as Event or Glib (it
       does not even come close to EV, though), with respect to I/O watchers.
       Timers are handled less optimally, but for many common tasks, it's
       still on par with event loops written in C.

       This event loop has been optimised for the following use cases:

       monotonic clock is available
           This module will use the POSIX monotonic clock option (if it can be
           detected at runtime) or the POSIX "times" function (if the
           resolution is at least 100Hz), in which case it will not suffer
           adversely from time jumps.

           If no monotonic clock is available, this module will not attempt to
           correct for time jumps in any way.

           The clock chosen will be reported if the environment variable
           $PERL_ANYEVENT_VERBOSE is set to 8 or higher.

       any number of watchers on one fd
           Supporting a large number of watchers per fd is purely a dirty
           benchmark optimisation not relevant in practise. The more common
           case of having one watcher per fd/poll combo is special-cased,
           however, and therefore fast, too.





perl v5.12.2                2009-09-13                          1





AnyEvent::Impl:UserlContributed Perl DocuAnyEvent::Impl::Perl(3p)


       relatively few active fds per "select" call
           This module expects that only a tiny amount of fds is active at any
           one time. This is relatively typical of larger servers (but not the
           case where "select" traditionally is fast), at the expense of the
           "dense activity case" where most of the fds are active (which suits
           "select").

           The optimal implementation of the "dense" case is not much faster,
           though, so the module should behave very well in most cases,
           subject to the bad scalability of "select" in general.

       lots of timer changes/iteration, or none at all
           This module sorts the timer list using perl's "sort", even though a
           total ordering is not required for timers.

           This sorting is expensive, but means sorting can be avoided unless
           the timer list has changed in a way that requires a new sort.

           This means that adding lots of timers is very efficient, as well as
           not changing the timers. Advancing timers (e.g. recreating a
           timeout watcher on activity) is also relatively efficient, for
           example, if you have a large number of timeout watchers that time
           out after 10 seconds, then the timer list will be sorted only once
           every 10 seconds.

           This should not have much of an impact unless you have hundreds or
           thousands of timers, though, or your timers have very small
           timeouts.

FUNCTIONS
       The only user-visible function provided by this module is the "loop"
       function:

       AnyEvent::Impl::Perl::loop
           Run the event loop, usually the last thing done in the main program
           when you want to use the pure-perl backend.

SEE ALSO
       AnyEvent.

AUTHOR
          Marc Lehmann <schmorpATschmorp.de>
          http://home.schmorp.de/














perl v5.12.2                2009-09-13                          2