| elf(5) - phpMan
ELF(5) Linux Programmer's Manual ELF(5)
NAME
elf - format of Executable and Linking Format (ELF) files
SYNOPSIS
#include <elf.h>
DESCRIPTION
The header file <elf.h> defines the format of ELF executable binary files. Amongst these
files are normal executable files, relocatable object files, core files and shared
libraries.
An executable file using the ELF file format consists of an ELF header, followed by a pro‐
gram header table or a section header table, or both. The ELF header is always at offset
zero of the file. The program header table and the section header table's offset in the
file are defined in the ELF header. The two tables describe the rest of the particulari‐
ties of the file.
This header file describes the above mentioned headers as C structures and also includes
structures for dynamic sections, relocation sections and symbol tables.
The following types are used for N-bit architectures (N=32,64, ElfN stands for Elf32 or
Elf64, uintN_t stands for uint32_t or uint64_t):
ElfN_Addr Unsigned program address, uintN_t
ElfN_Off Unsigned file offset, uintN_t
ElfN_Section Unsigned section index, uint16_t
ElfN_Versym Unsigned version symbol information, uint16_t
Elf_Byte unsigned char
ElfN_Half uint16_t
ElfN_Sword int32_t
ElfN_Word uint32_t
ElfN_Sxword int64_t
ElfN_Xword uint64_t
(Note: The *BSD terminology is a bit different. There Elf64_Half is twice as large as
Elf32_Half, and Elf64Quarter is used for uint16_t. In order to avoid confusion these
types are replaced by explicit ones in the below.)
All data structures that the file format defines follow the "natural" size and alignment
guidelines for the relevant class. If necessary, data structures contain explicit padding
to ensure 4-byte alignment for 4-byte objects, to force structure sizes to a multiple of
4, and so on.
The ELF header is described by the type Elf32_Ehdr or Elf64_Ehdr:
#define EI_NIDENT 16
typedef struct {
unsigned char e_ident[EI_NIDENT];
uint16_t e_type;
uint16_t e_machine;
uint32_t e_version;
ElfN_Addr e_entry;
ElfN_Off e_phoff;
ElfN_Off e_shoff;
uint32_t e_flags;
uint16_t e_ehsize;
uint16_t e_phentsize;
uint16_t e_phnum;
uint16_t e_shentsize;
uint16_t e_shnum;
uint16_t e_shstrndx;
} ElfN_Ehdr;
The fields have the following meanings:
e_ident This array of bytes specifies to interpret the file, independent of the pro‐
cessor or the file's remaining contents. Within this array everything is
named by macros, which start with the prefix EI_ and may contain values which
start with the prefix ELF. The following macros are defined:
EI_MAG0 The first byte of the magic number. It must be filled with ELF‐
MAG0. (0: 0x7f)
EI_MAG1 The second byte of the magic number. It must be filled with ELF‐
MAG1. (1: 'E')
EI_MAG2 The third byte of the magic number. It must be filled with ELF‐
MAG2. (2: 'L')
EI_MAG3 The fourth byte of the magic number. It must be filled with ELF‐
MAG3. (3: 'F')
EI_CLASS The fifth byte identifies the architecture for this binary:
ELFCLASSNONE This class is invalid.
ELFCLASS32 This defines the 32-bit architecture. It supports
machines with files and virtual address spaces up to
4 Gigabytes.
ELFCLASS64 This defines the 64-bit architecture.
EI_DATA The sixth byte specifies the data encoding of the processor-spe‐
cific data in the file. Currently these encodings are supported:
ELFDATANONE Unknown data format.
ELFDATA2LSB Two's complement, little-endian.
ELFDATA2MSB Two's complement, big-endian.
EI_VERSION The seventh byte is the version number of the ELF specification:
EV_NONE Invalid version.
EV_CURRENT Current version.
EI_OSABI The eighth byte identifies the operating system and ABI to which
the object is targeted. Some fields in other ELF structures have
flags and values that have platform-specific meanings; the inter‐
pretation of those fields is determined by the value of this byte.
For example:
ELFOSABI_NONE Same as ELFOSABI_SYSV
ELFOSABI_SYSV UNIX System V ABI.
ELFOSABI_HPUX HP-UX ABI.
ELFOSABI_NETBSD NetBSD ABI.
ELFOSABI_LINUX Linux ABI.
ELFOSABI_SOLARIS Solaris ABI.
ELFOSABI_IRIX IRIX ABI.
ELFOSABI_FREEBSD FreeBSD ABI.
ELFOSABI_TRU64 TRU64 UNIX ABI.
ELFOSABI_ARM ARM architecture ABI.
ELFOSABI_STANDALONE Stand-alone (embedded) ABI.
EI_ABIVERSION
The ninth byte identifies the version of the ABI to which the
object is targeted. This field is used to distinguish among
incompatible versions of an ABI. The interpretation of this ver‐
sion number is dependent on the ABI identified by the EI_OSABI
field. Applications conforming to this specification use the
value 0.
EI_PAD Start of padding. These bytes are reserved and set to zero. Pro‐
grams which read them should ignore them. The value for EI_PAD
will change in the future if currently unused bytes are given
meanings.
EI_NIDENT The size of the e_ident array.
e_type This member of the structure identifies the object file type:
ET_NONE An unknown type.
ET_REL A relocatable file.
ET_EXEC An executable file.
ET_DYN A shared object.
ET_CORE A core file.
e_machine This member specifies the required architecture for an individual file. For
example:
EM_NONE An unknown machine.
EM_M32 AT&T WE 32100.
EM_SPARC Sun Microsystems SPARC.
EM_386 Intel 80386.
EM_68K Motorola 68000.
EM_88K Motorola 88000.
EM_860 Intel 80860.
EM_MIPS MIPS RS3000 (big-endian only).
EM_PARISC HP/PA.
EM_SPARC32PLUS
SPARC with enhanced instruction set.
EM_PPC PowerPC.
EM_PPC64 PowerPC 64-bit.
EM_S390 IBM S/390
EM_ARM Advanced RISC Machines
EM_SH Renesas SuperH
EM_SPARCV9 SPARC v9 64-bit.
EM_IA_64 Intel Itanium
EM_X86_64 AMD x86-64
EM_VAX DEC Vax.
e_version This member identifies the file version:
EV_NONE Invalid version.
EV_CURRENT Current version.
e_entry This member gives the virtual address to which the system first transfers con‐
trol, thus starting the process. If the file has no associated entry point,
this member holds zero.
e_phoff This member holds the program header table's file offset in bytes. If the
file has no program header table, this member holds zero.
e_shoff This member holds the section header table's file offset in bytes. If the
file has no section header table, this member holds zero.
e_flags This member holds processor-specific flags associated with the file. Flag
names take the form EF_`machine_flag'. Currently no flags have been defined.
e_ehsize This member holds the ELF header's size in bytes.
e_phentsize This member holds the size in bytes of one entry in the file's program header
table; all entries are the same size.
e_phnum This member holds the number of entries in the program header table. Thus the
product of e_phentsize and e_phnum gives the table's size in bytes. If a file
has no program header, e_phnum holds the value zero.
If the number of entries in the program header table is larger than or equal
to PN_XNUM (0xffff), this member holds PN_XNUM (0xffff) and the real number of
entries in the program header table is held in the sh_info member of the ini‐
tial entry in section header table. Otherwise, the sh_info member of the ini‐
tial entry contains the value zero.
PN_XNUM This is defined as 0xffff, the largest number e_phnum can have, spec‐
ifying where the actual number of program headers is assigned.
e_shentsize This member holds a sections header's size in bytes. A section header is one
entry in the section header table; all entries are the same size.
e_shnum This member holds the number of entries in the section header table. Thus the
product of e_shentsize and e_shnum gives the section header table's size in
bytes. If a file has no section header table, e_shnum holds the value of
zero.
If the number of entries in the section header table is larger than or equal
to SHN_LORESERVE (0xff00), e_shnum holds the value zero and the real number of
entries in the section header table is held in the sh_size member of the ini‐
tial entry in section header table. Otherwise, the sh_size member of the ini‐
tial entry in the section header table holds the value zero.
e_shstrndx This member holds the section header table index of the entry associated with
the section name string table. If the file has no section name string table,
this member holds the value SHN_UNDEF.
If the index of section name string table section is larger than or equal to
SHN_LORESERVE (0xff00), this member holds SHN_XINDEX (0xffff) and the real
index of the section name string table section is held in the sh_link member
of the initial entry in section header table. Otherwise, the sh_link member
of the initial entry in section header table contains the value zero.
SHN_UNDEF This value marks an undefined, missing, irrelevant, or otherwise
meaningless section reference. For example, a symbol "defined"
relative to section number SHN_UNDEF is an undefined symbol.
SHN_LORESERVE This value specifies the lower bound of the range of reserved
indices.
SHN_LOPROC Values greater than or equal to SHN_HIPROC are reserved for pro‐
cessor-specific semantics.
SHN_HIPROC Values less than or equal to SHN_LOPROC are reserved for proces‐
sor-specific semantics.
SHN_ABS This value specifies absolute values for the corresponding ref‐
erence. For example, symbols defined relative to section number
SHN_ABS have absolute values and are not affected by relocation.
SHN_COMMON Symbols defined relative to this section are common symbols,
such as Fortran COMMON or unallocated C external variables.
SHN_HIRESERVE This value specifies the upper bound of the range of reserved
indices between SHN_LORESERVE and SHN_HIRESERVE, inclusive; the
values do not reference the section header table. That is, the
section header table does not contain entries for the reserved
indices.
An executable or shared object file's program header table is an array of structures, each
describing a segment or other information the system needs to prepare the program for exe‐
cution. An object file segment contains one or more sections. Program headers are mean‐
ingful only for executable and shared object files. A file specifies its own program
header size with the ELF header's e_phentsize and e_phnum members. The ELF program header
is described by the type Elf32_Phdr or Elf64_Phdr depending on the architecture:
typedef struct {
uint32_t p_type;
Elf32_Off p_offset;
Elf32_Addr p_vaddr;
Elf32_Addr p_paddr;
uint32_t p_filesz;
uint32_t p_memsz;
uint32_t p_flags;
uint32_t p_align;
} Elf32_Phdr;
typedef struct {
uint32_t p_type;
uint32_t p_flags;
Elf64_Off p_offset;
Elf64_Addr p_vaddr;
Elf64_Addr p_paddr;
uint64_t p_filesz;
uint64_t p_memsz;
uint64_t p_align;
} Elf64_Phdr;
The main difference between the 32-bit and the 64-bit program header lies in the location
of the p_flags member in the total struct.
p_type This member of the Phdr struct tells what kind of segment this array element
describes or how to interpret the array element's information.
PT_NULL The array element is unused and the other members' values are
undefined. This lets the program header have ignored entries.
PT_LOAD The array element specifies a loadable segment, described by
p_filesz and p_memsz. The bytes from the file are mapped to the
beginning of the memory segment. If the segment's memory size
p_memsz is larger than the file size p_filesz, the "extra" bytes
are defined to hold the value 0 and to follow the segment's ini‐
tialized area. The file size may not be larger than the memory
size. Loadable segment entries in the program header table appear
in ascending order, sorted on the p_vaddr member.
PT_DYNAMIC The array element specifies dynamic linking information.
PT_INTERP The array element specifies the location and size of a null-termi‐
nated pathname to invoke as an interpreter. This segment type is
meaningful only for executable files (though it may occur for
shared objects). However it may not occur more than once in a
file. If it is present, it must precede any loadable segment
entry.
PT_NOTE The array element specifies the location and size for auxiliary
information.
PT_SHLIB This segment type is reserved but has unspecified semantics. Pro‐
grams that contain an array element of this type do not conform to
the ABI.
PT_PHDR The array element, if present, specifies the location and size of
the program header table itself, both in the file and in the mem‐
ory image of the program. This segment type may not occur more
than once in a file. Moreover, it may occur only if the program
header table is part of the memory image of the program. If it is
present, it must precede any loadable segment entry.
PT_LOPROC Values greater than or equal to PT_HIPROC are reserved for proces‐
sor-specific semantics.
PT_HIPROC Values less than or equal to PT_LOPROC are reserved for processor-
specific semantics.
PT_GNU_STACK
GNU extension which is used by the Linux kernel to control the
state of the stack via the flags set in the p_flags member.
p_offset This member holds the offset from the beginning of the file at which the first
byte of the segment resides.
p_vaddr This member holds the virtual address at which the first byte of the segment
resides in memory.
p_paddr On systems for which physical addressing is relevant, this member is reserved
for the segment's physical address. Under BSD this member is not used and
must be zero.
p_filesz This member holds the number of bytes in the file image of the segment. It
may be zero.
p_memsz This member holds the number of bytes in the memory image of the segment. It
may be zero.
p_flags This member holds a bit mask of flags relevant to the segment:
PF_X An executable segment.
PF_W A writable segment.
PF_R A readable segment.
A text segment commonly has the flags PF_X and PF_R. A data segment commonly
has PF_X, PF_W and PF_R.
p_align This member holds the value to which the segments are aligned in memory and in
the file. Loadable process segments must have congruent values for p_vaddr
and p_offset, modulo the page size. Values of zero and one mean no alignment
is required. Otherwise, p_align should be a positive, integral power of two,
and p_vaddr should equal p_offset, modulo p_align.
A file's section header table lets one locate all the file's sections. The section header
table is an array of Elf32_Shdr or Elf64_Shdr structures. The ELF header's e_shoff member
gives the byte offset from the beginning of the file to the section header table. e_shnum
holds the number of entries the section header table contains. e_shentsize holds the size
in bytes of each entry.
A section header table index is a subscript into this array. Some section header table
indices are reserved: the initial entry and the indices between SHN_LORESERVE and
SHN_HIRESERVE. The initial entry is used in ELF extensions for e_phnum, e_shnum and
e_strndx; in other cases, each field in the initial entry is set to zero. An object file
does not have sections for these special indices:
SHN_UNDEF This value marks an undefined, missing, irrelevant, or otherwise
meaningless section reference.
SHN_LORESERVE This value specifies the lower bound of the range of reserved
indices.
SHN_LOPROC Values greater than or equal to SHN_HIPROC are reserved for proces‐
sor-specific semantics.
SHN_HIPROC Values less than or equal to SHN_LOPROC are reserved for processor-
specific semantics.
SHN_ABS This value specifies the absolute value for the corresponding refer‐
ence. For example, a symbol defined relative to section number
SHN_ABS has an absolute value and is not affected by relocation.
SHN_COMMON Symbols defined relative to this section are common symbols, such as
FORTRAN COMMON or unallocated C external variables.
SHN_HIRESERVE This value specifies the upper bound of the range of reserved
indices. The system reserves indices between SHN_LORESERVE and
SHN_HIRESERVE, inclusive. The section header table does not contain
entries for the reserved indices.
The section header has the following structure:
typedef struct {
uint32_t sh_name;
uint32_t sh_type;
uint32_t sh_flags;
Elf32_Addr sh_addr;
Elf32_Off sh_offset;
uint32_t sh_size;
uint32_t sh_link;
uint32_t sh_info;
uint32_t sh_addralign;
uint32_t sh_entsize;
} Elf32_Shdr;
typedef struct {
uint32_t sh_name;
uint32_t sh_type;
uint64_t sh_flags;
Elf64_Addr sh_addr;
Elf64_Off sh_offset;
uint64_t sh_size;
uint32_t sh_link;
uint32_t sh_info;
uint64_t sh_addralign;
uint64_t sh_entsize;
} Elf64_Shdr;
No real differences exist between the 32-bit and 64-bit section headers.
sh_name This member specifies the name of the section. Its value is an index into the
section header string table section, giving the location of a null-terminated
string.
sh_type This member categorizes the section's contents and semantics.
SHT_NULL This value marks the section header as inactive. It does not
have an associated section. Other members of the section header
have undefined values.
SHT_PROGBITS This section holds information defined by the program, whose for‐
mat and meaning are determined solely by the program.
SHT_SYMTAB This section holds a symbol table. Typically, SHT_SYMTAB pro‐
vides symbols for link editing, though it may also be used for
dynamic linking. As a complete symbol table, it may contain many
symbols unnecessary for dynamic linking. An object file can also
contain a SHT_DYNSYM section.
SHT_STRTAB This section holds a string table. An object file may have mul‐
tiple string table sections.
SHT_RELA This section holds relocation entries with explicit addends, such
as type Elf32_Rela for the 32-bit class of object files. An
object may have multiple relocation sections.
SHT_HASH This section holds a symbol hash table. An object participating
in dynamic linking must contain a symbol hash table. An object
file may have only one hash table.
SHT_DYNAMIC This section holds information for dynamic linking. An object
file may have only one dynamic section.
SHT_NOTE This section holds information that marks the file in some way.
SHT_NOBITS A section of this type occupies no space in the file but other‐
wise resembles SHT_PROGBITS. Although this section contains no
bytes, the sh_offset member contains the conceptual file offset.
SHT_REL This section holds relocation offsets without explicit addends,
such as type Elf32_Rel for the 32-bit class of object files. An
object file may have multiple relocation sections.
SHT_SHLIB This section is reserved but has unspecified semantics.
SHT_DYNSYM This section holds a minimal set of dynamic linking symbols. An
object file can also contain a SHT_SYMTAB section.
SHT_LOPROC This value up to and including SHT_HIPROC is reserved for proces‐
sor-specific semantics.
SHT_HIPROC This value down to and including SHT_LOPROC is reserved for pro‐
cessor-specific semantics.
SHT_LOUSER This value specifies the lower bound of the range of indices
reserved for application programs.
SHT_HIUSER This value specifies the upper bound of the range of indices
reserved for application programs. Section types between
SHT_LOUSER and SHT_HIUSER may be used by the application, without
conflicting with current or future system-defined section types.
sh_flags Sections support one-bit flags that describe miscellaneous attributes. If a
flag bit is set in sh_flags, the attribute is "on" for the section. Otherwise,
the attribute is "off" or does not apply. Undefined attributes are set to zero.
SHF_WRITE This section contains data that should be writable during process
execution.
SHF_ALLOC This section occupies memory during process execution. Some con‐
trol sections do not reside in the memory image of an object
file. This attribute is off for those sections.
SHF_EXECINSTR This section contains executable machine instructions.
SHF_MASKPROC All bits included in this mask are reserved for processor-spe‐
cific semantics.
sh_addr If this section appears in the memory image of a process, this member holds the
address at which the section's first byte should reside. Otherwise, the member
contains zero.
sh_offset This member's value holds the byte offset from the beginning of the file to the
first byte in the section. One section type, SHT_NOBITS, occupies no space in
the file, and its sh_offset member locates the conceptual placement in the file.
sh_size This member holds the section's size in bytes. Unless the section type is
SHT_NOBITS, the section occupies sh_size bytes in the file. A section of type
SHT_NOBITS may have a nonzero size, but it occupies no space in the file.
sh_link This member holds a section header table index link, whose interpretation
depends on the section type.
sh_info This member holds extra information, whose interpretation depends on the section
type.
sh_addralign
Some sections have address alignment constraints. If a section holds a double‐
word, the system must ensure doubleword alignment for the entire section. That
is, the value of sh_addr must be congruent to zero, modulo the value of
sh_addralign. Only zero and positive integral powers of two are allowed. Val‐
ues of zero or one mean the section has no alignment constraints.
sh_entsize
Some sections hold a table of fixed-sized entries, such as a symbol table. For
such a section, this member gives the size in bytes for each entry. This member
contains zero if the section does not hold a table of fixed-size entries.
Various sections hold program and control information:
.bss This section holds uninitialized data that contributes to the program's memory
image. By definition, the system initializes the data with zeros when the pro‐
gram begins to run. This section is of type SHT_NOBITS. The attribute types
are SHF_ALLOC and SHF_WRITE.
.comment This section holds version control information. This section is of type
SHT_PROGBITS. No attribute types are used.
.ctors This section holds initialized pointers to the C++ constructor functions. This
section is of type SHT_PROGBITS. The attribute types are SHF_ALLOC and
SHF_WRITE.
.data This section holds initialized data that contribute to the program's memory
image. This section is of type SHT_PROGBITS. The attribute types are SHF_ALLOC
and SHF_WRITE.
.data1 This section holds initialized data that contribute to the program's memory
image. This section is of type SHT_PROGBITS. The attribute types are SHF_ALLOC
and SHF_WRITE.
.debug This section holds information for symbolic debugging. The contents are unspec‐
ified. This section is of type SHT_PROGBITS. No attribute types are used.
.dtors This section holds initialized pointers to the C++ destructor functions. This
section is of type SHT_PROGBITS. The attribute types are SHF_ALLOC and
SHF_WRITE.
.dynamic This section holds dynamic linking information. The section's attributes will
include the SHF_ALLOC bit. Whether the SHF_WRITE bit is set is processor-spe‐
cific. This section is of type SHT_DYNAMIC. See the attributes above.
.dynstr This section holds strings needed for dynamic linking, most commonly the strings
that represent the names associated with symbol table entries. This section is
of type SHT_STRTAB. The attribute type used is SHF_ALLOC.
.dynsym This section holds the dynamic linking symbol table. This section is of type
SHT_DYNSYM. The attribute used is SHF_ALLOC.
.fini This section holds executable instructions that contribute to the process termi‐
nation code. When a program exits normally the system arranges to execute the
code in this section. This section is of type SHT_PROGBITS. The attributes
used are SHF_ALLOC and SHF_EXECINSTR.
.gnu.version
This section holds the version symbol table, an array of ElfN_Half elements.
This section is of type SHT_GNU_versym. The attribute type used is SHF_ALLOC.
.gnu.version_d
This section holds the version symbol definitions, a table of ElfN_Verdef struc‐
tures. This section is of type SHT_GNU_verdef. The attribute type used is
SHF_ALLOC.
.gnu.version_r
This section holds the version symbol needed elements, a table of ElfN_Verneed
structures. This section is of type SHT_GNU_versym. The attribute type used is
SHF_ALLOC.
.got This section holds the global offset table. This section is of type SHT_PROG‐
BITS. The attributes are processor-specific.
.hash This section holds a symbol hash table. This section is of type SHT_HASH. The
attribute used is SHF_ALLOC.
.init This section holds executable instructions that contribute to the process ini‐
tialization code. When a program starts to run the system arranges to execute
the code in this section before calling the main program entry point. This sec‐
tion is of type SHT_PROGBITS. The attributes used are SHF_ALLOC and SHF_EXECIN‐
STR.
.interp This section holds the pathname of a program interpreter. If the file has a
loadable segment that includes the section, the section's attributes will
include the SHF_ALLOC bit. Otherwise, that bit will be off. This section is of
type SHT_PROGBITS.
.line This section holds line number information for symbolic debugging, which
describes the correspondence between the program source and the machine code.
The contents are unspecified. This section is of type SHT_PROGBITS. No
attribute types are used.
.note This section holds information in the "Note Section" format. This section is of
type SHT_NOTE. No attribute types are used. OpenBSD native executables usually
contain a .note.openbsd.ident section to identify themselves, for the kernel to
bypass any compatibility ELF binary emulation tests when loading the file.
.note.GNU-stack
This section is used in Linux object files for declaring stack attributes. This
section is of type SHT_PROGBITS. The only attribute used is SHF_EXECINSTR.
This indicates to the GNU linker that the object file requires an executable
stack.
.plt This section holds the procedure linkage table. This section is of type
SHT_PROGBITS. The attributes are processor-specific.
.relNAME This section holds relocation information as described below. If the file has a
loadable segment that includes relocation, the section's attributes will include
the SHF_ALLOC bit. Otherwise, the bit will be off. By convention, "NAME" is
supplied by the section to which the relocations apply. Thus a relocation sec‐
tion for .text normally would have the name .rel.text. This section is of type
SHT_REL.
.relaNAME This section holds relocation information as described below. If the file has a
loadable segment that includes relocation, the section's attributes will include
the SHF_ALLOC bit. Otherwise, the bit will be off. By convention, "NAME" is
supplied by the section to which the relocations apply. Thus a relocation sec‐
tion for .text normally would have the name .rela.text. This section is of type
SHT_RELA.
.rodata This section holds read-only data that typically contributes to a nonwritable
segment in the process image. This section is of type SHT_PROGBITS. The
attribute used is SHF_ALLOC.
.rodata1 This section holds read-only data that typically contributes to a nonwritable
segment in the process image. This section is of type SHT_PROGBITS. The
attribute used is SHF_ALLOC.
.shstrtab This section holds section names. This section is of type SHT_STRTAB. No
attribute types are used.
.strtab This section holds strings, most commonly the strings that represent the names
associated with symbol table entries. If the file has a loadable segment that
includes the symbol string table, the section's attributes will include the
SHF_ALLOC bit. Otherwise, the bit will be off. This section is of type
SHT_STRTAB.
.symtab This section holds a symbol table. If the file has a loadable segment that
includes the symbol table, the section's attributes will include the SHF_ALLOC
bit. Otherwise, the bit will be off. This section is of type SHT_SYMTAB.
.text This section holds the "text", or executable instructions, of a program. This
section is of type SHT_PROGBITS. The attributes used are SHF_ALLOC and
SHF_EXECINSTR.
String table sections hold null-terminated character sequences, commonly called strings.
The object file uses these strings to represent symbol and section names. One references
a string as an index into the string table section. The first byte, which is index zero,
is defined to hold a null byte ('\0'). Similarly, a string table's last byte is defined
to hold a null byte, ensuring null termination for all strings.
An object file's symbol table holds information needed to locate and relocate a program's
symbolic definitions and references. A symbol table index is a subscript into this array.
typedef struct {
uint32_t st_name;
Elf32_Addr st_value;
uint32_t st_size;
unsigned char st_info;
unsigned char st_other;
uint16_t st_shndx;
} Elf32_Sym;
typedef struct {
uint32_t st_name;
unsigned char st_info;
unsigned char st_other;
uint16_t st_shndx;
Elf64_Addr st_value;
uint64_t st_size;
} Elf64_Sym;
The 32-bit and 64-bit versions have the same members, just in a different order.
st_name This member holds an index into the object file's symbol string table, which
holds character representations of the symbol names. If the value is nonzero,
it represents a string table index that gives the symbol name. Otherwise, the
symbol table has no name.
st_value This member gives the value of the associated symbol.
st_size Many symbols have associated sizes. This member holds zero if the symbol has no
size or an unknown size.
st_info This member specifies the symbol's type and binding attributes:
STT_NOTYPE The symbol's type is not defined.
STT_OBJECT The symbol is associated with a data object.
STT_FUNC The symbol is associated with a function or other executable code.
STT_SECTION The symbol is associated with a section. Symbol table entries of
this type exist primarily for relocation and normally have STB_LOCAL
bindings.
STT_FILE By convention, the symbol's name gives the name of the source file
associated with the object file. A file symbol has STB_LOCAL bind‐
ings, its section index is SHN_ABS, and it precedes the other
STB_LOCAL symbols of the file, if it is present.
STT_LOPROC This value up to and including STT_HIPROC is reserved for processor-
specific semantics.
STT_HIPROC This value down to and including STT_LOPROC is reserved for proces‐
sor-specific semantics.
STB_LOCAL Local symbols are not visible outside the object file containing
their definition. Local symbols of the same name may exist in mul‐
tiple files without interfering with each other.
STB_GLOBAL Global symbols are visible to all object files being combined. One
file's definition of a global symbol will satisfy another file's
undefined reference to the same symbol.
STB_WEAK Weak symbols resemble global symbols, but their definitions have
lower precedence.
STB_LOPROC This value up to and including STB_HIPROC is reserved for processor-
specific semantics.
STB_HIPROC This value down to and including STB_LOPROC is reserved for proces‐
sor-specific semantics.
There are macros for packing and unpacking the binding and type
fields:
ELF32_ST_BIND(info) or ELF64_ST_BIND(info) extract a binding from an
st_info value.
ELF32_ST_TYPE(info) or ELF64_ST_TYPE(info)
extract a type from an st_info value.
ELF32_ST_INFO(bind, type) or ELF64_ST_INFO(bind, type)
convert a binding and a type into an st_info value.
st_other This member defines the symbol visibility.
STV_DEFAULT Default symbol visibility rules.
STV_INTERNAL Processor-specific hidden class.
STV_HIDDEN Symbol is unavailable in other modules.
STV_PROTECTED Not preemptible, not exported.
There are macros for extracting the visibility type:
ELF32_ST_VISIBILITY(other) or ELF64_ST_VISIBILITY(other)
st_shndx Every symbol table entry is "defined" in relation to some section. This member
holds the relevant section header table index.
Relocation is the process of connecting symbolic references with symbolic definitions.
Relocatable files must have information that describes how to modify their section con‐
tents, thus allowing executable and shared object files to hold the right information for
a process's program image. Relocation entries are these data.
Relocation structures that do not need an addend:
typedef struct {
Elf32_Addr r_offset;
uint32_t r_info;
} Elf32_Rel;
typedef struct {
Elf64_Addr r_offset;
uint64_t r_info;
} Elf64_Rel;
Relocation structures that need an addend:
typedef struct {
Elf32_Addr r_offset;
uint32_t r_info;
int32_t r_addend;
} Elf32_Rela;
typedef struct {
Elf64_Addr r_offset;
uint64_t r_info;
int64_t r_addend;
} Elf64_Rela;
r_offset This member gives the location at which to apply the relocation action. For a
relocatable file, the value is the byte offset from the beginning of the sec‐
tion to the storage unit affected by the relocation. For an executable file
or shared object, the value is the virtual address of the storage unit
affected by the relocation.
r_info This member gives both the symbol table index with respect to which the relo‐
cation must be made and the type of relocation to apply. Relocation types are
processor-specific. When the text refers to a relocation entry's relocation
type or symbol table index, it means the result of applying ELF[32|64]_R_TYPE
or ELF[32|64]_R_SYM, respectively, to the entry's r_info member.
r_addend This member specifies a constant addend used to compute the value to be stored
into the relocatable field.
The .dynamic section contains a series of structures that hold relevant dynamic linking
information. The d_tag member controls the interpretation of d_un.
typedef struct {
Elf32_Sword d_tag;
union {
Elf32_Word d_val;
Elf32_Addr d_ptr;
} d_un;
} Elf32_Dyn;
extern Elf32_Dyn _DYNAMIC[];
typedef struct {
Elf64_Sxword d_tag;
union {
Elf64_Xword d_val;
Elf64_Addr d_ptr;
} d_un;
} Elf64_Dyn;
extern Elf64_Dyn _DYNAMIC[];
d_tag This member may have any of the following values:
DT_NULL Marks end of dynamic section
DT_NEEDED String table offset to name of a needed library
DT_PLTRELSZ Size in bytes of PLT relocs
DT_PLTGOT Address of PLT and/or GOT
DT_HASH Address of symbol hash table
DT_STRTAB Address of string table
DT_SYMTAB Address of symbol table
DT_RELA Address of Rela relocs table
DT_RELASZ Size in bytes of Rela table
DT_RELAENT Size in bytes of a Rela table entry
DT_STRSZ Size in bytes of string table
DT_SYMENT Size in bytes of a symbol table entry
DT_INIT Address of the initialization function
DT_FINI Address of the termination function
DT_SONAME String table offset to name of shared object
DT_RPATH String table offset to library search path (deprecated)
DT_SYMBOLIC Alert linker to search this shared object before the executable for
symbols
DT_REL Address of Rel relocs table
DT_RELSZ Size in bytes of Rel table
DT_RELENT Size in bytes of a Rel table entry
DT_PLTREL Type of reloc the PLT refers (Rela or Rel)
DT_DEBUG Undefined use for debugging
DT_TEXTREL Absence of this indicates no relocs should apply to a nonwritable
segment
DT_JMPREL Address of reloc entries solely for the PLT
DT_BIND_NOW Instruct dynamic linker to process all relocs before transferring
control to the executable
DT_RUNPATH String table offset to library search path
DT_LOPROC Start of processor-specific semantics
DT_HIPROC End of processor-specific semantics
d_val This member represents integer values with various interpretations.
d_ptr This member represents program virtual addresses. When interpreting these
addresses, the actual address should be computed based on the original file
value and memory base address. Files do not contain relocation entries to fixup
these addresses.
_DYNAMIC Array containing all the dynamic structures in the .dynamic section. This is
automatically populated by the linker.
NOTES
ELF first appeared in System V. The ELF format is an adopted standard.
The extensions for e_phnum, e_shnum and e_strndx respectively are Linux extensions. Sun,
BSD and AMD64 also support them; for further information, look under SEE ALSO.
SEE ALSO
as(1), gdb(1), ld(1), objdump(1), execve(2), core(5)
Hewlett-Packard, Elf-64 Object File Format.
Santa Cruz Operation, System V Application Binary Interface.
UNIX System Laboratories, "Object Files", Executable and Linking Format (ELF).
Sun Microsystems, Linker and Libraries Guide.
AMD64 ABI Draft, System V Application Binary Interface AMD64 Architecture Processor Sup‐
plement.
COLOPHON
This page is part of release 3.74 of the Linux man-pages project. A description of the
project, information about reporting bugs, and the latest version of this page, can be
found at http://www.kernel.org/doc/man-pages/.
Linux 2013-04-17 ELF(5)
|