| enum_ieee80211_key_flags(9) - phpMan
ENUM IEEE80211_KEY_F(9) Advanced driver interface ENUM IEEE80211_KEY_F(9)
NAME
enum_ieee80211_key_flags - key flags
SYNOPSIS
enum ieee80211_key_flags {
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT,
IEEE80211_KEY_FLAG_GENERATE_IV,
IEEE80211_KEY_FLAG_GENERATE_MMIC,
IEEE80211_KEY_FLAG_PAIRWISE,
IEEE80211_KEY_FLAG_SW_MGMT_TX,
IEEE80211_KEY_FLAG_PUT_IV_SPACE,
IEEE80211_KEY_FLAG_RX_MGMT,
IEEE80211_KEY_FLAG_RESERVE_TAILROOM
};
CONSTANTS
IEEE80211_KEY_FLAG_GENERATE_IV_MGMT
This flag should be set by the driver for a CCMP/GCMP key to indicate that is requires
IV generation only for managment frames (MFP).
IEEE80211_KEY_FLAG_GENERATE_IV
This flag should be set by the driver to indicate that it requires IV generation for
this particular key. Setting this flag does not necessarily mean that SKBs will have
sufficient tailroom for ICV or MIC.
IEEE80211_KEY_FLAG_GENERATE_MMIC
This flag should be set by the driver for a TKIP key if it requires Michael MIC
generation in software.
IEEE80211_KEY_FLAG_PAIRWISE
Set by mac80211, this flag indicates that the key is pairwise rather then a shared
key.
IEEE80211_KEY_FLAG_SW_MGMT_TX
This flag should be set by the driver for a CCMP/GCMP key if it requires CCMP/GCMP
encryption of management frames (MFP) to be done in software.
IEEE80211_KEY_FLAG_PUT_IV_SPACE
This flag should be set by the driver if space should be prepared for the IV, but the
IV itself should not be generated. Do not set together with
IEEE80211_KEY_FLAG_GENERATE_IV on the same key. Setting this flag does not necessarily
mean that SKBs will have sufficient tailroom for ICV or MIC.
IEEE80211_KEY_FLAG_RX_MGMT
This key will be used to decrypt received management frames. The flag can help drivers
that have a hardware crypto implementation that doesn't deal with management frames
properly by allowing them to not upload the keys to hardware and fall back to software
crypto. Note that this flag deals only with RX, if your crypto engine can't deal with
TX you can also set the IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in
SW.
IEEE80211_KEY_FLAG_RESERVE_TAILROOM
This flag should be set by the driver for a key to indicate that sufficient tailroom
must always be reserved for ICV or MIC, even when HW encryption is enabled.
DESCRIPTION
These flags are used for communication about keys between the driver and mac80211, with
the flags parameter of struct ieee80211_key_conf.
AUTHOR
Johannes Berg <johannes AT sipsolutions.net>
Author.
COPYRIGHT
Kernel Hackers Manual 4.8. January 2017 ENUM IEEE80211_KEY_F(9)
|