| |
up.(1) - phpMan
GnuPG (3pm) - Perl module interface to the GNU Privacy Guard (v1.x.x...
gnupg (7) - The GNU Privacy Guard suite of programs
Socket (3perl) - networking constants and support functions
__get_pfnblock_flags_mask (9) - Return the requested group of flags for the p...
__mdiobus_register (9) - bring up all the PHYs on a given bus and attach them...
__pci_enable_wake (9) - enable PCI device as wakeup event source
__register_chrdev (9) - create and register a cdev occupying a range of minors
__round_jiffies_up (9) - function to round jiffies up to a full second
__round_jiffies_up_relative (9) - function to round jiffies up to a full second
__scsi_device_lookup_by_target (9) - find a device given the target (UNLOCKED)
__wake_up (9) - wake up threads blocked on a waitqueue.
__wake_up_sync_key (9) - wake up threads blocked on a waitqueue.
_syscall (2) - invoking a system call without library support (OBSOLETE)
ablkcipher_request_set_tfm (9) - update cipher handle reference in request
acpi_dma_supported (9) - Check DMA support for the specified device.
acpi_get_dma_attr (9) - Check the supported DMA attr for the specified device.
addgnupghome (8) - Create .gnupg home directories
addgroup (8) - add a user or group to the system
adduser (8) - add a user or group to the system
adduser.conf (5) - configuration file for adduser(8) and addgroup(8) .
aead_request_set_tfm (9) - update cipher handle reference in request
ahash_request_set_tfm (9) - update cipher handle reference in request
airq_iv_alloc (9) - allocate irq bits from an interrupt vector
airq_iv_create (9) - create an interrupt vector
airq_iv_free (9) - free irq bits of an interrupt vector
airq_iv_release (9) - release an interrupt vector
airq_iv_scan (9) - scan interrupt vector for non-zero bits
alloc_etherdev_mqs (9) - Allocates and sets up an Ethernet device
Apache::TestConfig (3pm) - - Test Configuration setup module
Apache::TestMB (3pm) - Subclass of Module::Build to support Apache::Test
applygnupgdefaults (8) - Run gpgconf - apply-defaults for all users.
apt-secure (8) - Archive authentication support for APT
ata_dev_xfermask (9) - Compute supported xfermask of the given device
ata_sas_port_start (9) - Set port up for dma.
ata_scsi_find_dev (9) - lookup ata_device from scsi_cmnd
atapi_check_dma (9) - Check whether ATAPI DMA can be supported
autoreconf (1) - Update generated configuration files
autoupdate (1) - Update a configure.in to a newer Autoconf
avc_cleanup (3) - userspace SELinux AVC setup and teardown
avc_destroy (3) - userspace SELinux AVC setup and teardown
avc_open (3) - userspace SELinux AVC setup and teardown
avc_reset (3) - userspace SELinux AVC setup and teardown
axfrdns-conf (8) - sets up a DNS zone-transfer service.
backtrace (3) - support for application self-debugging
backtrace_symbols (3) - support for application self-debugging
backtrace_symbols_fd (3) - support for application self-debugging
bdev_dax_supported (9) - Check if the device supports dax for filesystem
bh_uptodate_or_lock (9) - Test whether the buffer is uptodate
bigint (3perl) - Transparent BigInteger support for Perl
bignum (3perl) - Transparent BigNumber support for Perl
bigrat (3perl) - Transparent BigNumber/BigRational support for Perl
blk_cleanup_queue (9) - shutdown a request queue
blk_queue_dma_drain (9) - Set up a drain buffer for excess dma.
blk_queue_update_dma_alignment (9) - update dma length and memory alignment
blk_queue_update_dma_pad (9) - update pad mask
blk_rq_prep_clone (9) - Helper function to setup clone request
blk_trace_shutdown (9) - stop and cleanup trace structures
blk_update_request (9) - Special helper function for request stacking drivers
BN_BLINDING_update (3ssl) - blinding related BIGNUM functions.
bootup (7) - System bootup process
btrfs (5) - mount options and supported file attributes for the bt...
btrfs-qgroup (8) - control the quota group of a btrfs filesystem
btrfs-show-super (8) - show btrfs superblock information stored in devices
calculate_imbalance (9) - Calculate the amount of imbalance present within th...
catman (8) - create or update the pre-formatted manual pages
ccw_device_is_pathgroup (9) - determine if paths to this device are grouped
ccwgroup_create_dev (9) - create and register a ccw group device
ccwgroup_driver_register (9) - register a ccw group driver
ccwgroup_driver_unregister (9) - deregister a ccw group driver
ccwgroup_probe_ccwdev (9) - probe function for slave devices
ccwgroup_remove_ccwdev (9) - remove function for slave devices
ccwgroup_set_offline (9) - disable a ccwgroup device
ccwgroup_set_online (9) - enable a ccwgroup device
cgclassify (1) - move running task(s) to given cgroups
cgclear (1) - unload the cgroup filesystem
cgconfig.conf (5) - libcgroup configuration file
cgconfigparser (8) - setup control group file system
cgcreate (1) - create new cgroup(s)
cgdelete (1) - remove control group(s)
cgexec (1) - run the task in given control groups
cgget (1) - print parameter(s) of given group(s)
cgmanager (8) - a daemon to manage cgroups
cgred.conf (5) - libcgroup configuration file
cgrules.conf (5) - libcgroup configuration file
cgrulesengd (8) - control group rules daemon
cgset (1) - set the parameters of given cgroup(s)
check_asym_packing (9) - Check to see if the group is packed into the sched d...
checksctp (1) - check if kernel supports SCTP
chgpasswd (8) - update group passwords in batch mode
chgrp (1) - change group ownership
chpasswd (8) - update passwords in batch mode
Class::C3::XS (3pm) - XS speedups for Class::C3
cleanup_srcu_struct (9) - deconstruct a sleep-RCU structure
clk_get (9) - lookup and obtain a reference to a clock producer.
clk_get_sys (9) - get a clock based upon the device name
colorit (1) - a script for markuping the text input
CONF_modules_finish (3ssl) - OpenSSL configuration cleanup functions
CONF_modules_free (3ssl) - OpenSSL configuration cleanup functions
CONF_modules_unload (3ssl) - OpenSSL configuration cleanup functions
Config::Extensions (3perl) - hash lookup of which core extensions were built.
console-setup (5) - configuration file for setupcon
corosync-cpgtool (8) - A tool for displaying cpg groups and members.
CPAN::Queue (3perl) - internal queue support for CPAN.pm
cpgr (8) - copy with locking the given file to the password or gr...
cppw (8) - copy with locking the given file to the password or gr...
cpu_load_update (9) - update the rq->cpu_load[] statistics
cpupri_cleanup (9) - clean up the cpupri structure
cpupri_find (9) - find the best (lowest-pri) CPU in the system
cpupri_init (9) - initialize the cpupri structure
cpupri_set (9) - update the cpu priority setting
crc7_be (9) - update the CRC7 for the data buffer
Crypt::GPG (3pm) - An Object Oriented Interface to GnuPG.
crypto_ahash_finup (9) - update and finalize message digest
CRYPTO_destroy_dynlockid (3ssl) - OpenSSL thread support
CRYPTO_get_new_dynlockid (3ssl) - OpenSSL thread support
CRYPTO_lock (3ssl) - OpenSSL thread support
CRYPTO_num_locks (3ssl) - OpenSSL thread support
CRYPTO_set_dynlock_create_callback (3ssl) - OpenSSL thread support
CRYPTO_set_dynlock_destroy_callback (3ssl) - OpenSSL thread support
CRYPTO_set_dynlock_lock_callback (3ssl) - OpenSSL thread support
CRYPTO_set_locking_callback (3ssl) - OpenSSL thread support
crypto_shash_update (9) - add data to message digest for processing
CRYPTO_THREADID_cmp (3ssl) - OpenSSL thread support
CRYPTO_THREADID_cpy (3ssl) - OpenSSL thread support
CRYPTO_THREADID_current (3ssl) - OpenSSL thread support
CRYPTO_THREADID_get_callback (3ssl) - OpenSSL thread support
CRYPTO_THREADID_hash (3ssl) - OpenSSL thread support
CRYPTO_THREADID_set_callback (3ssl) - OpenSSL thread support
d_add_ci (9) - lookup or allocate new dentry with case-exact name
d_alloc_pseudo (9) - allocate a dentry (for lookup-less filesystems)
d_backing_dentry (9) - Get upper or lower dentry we should be using
d_backing_inode (9) - Get upper or lower inode we should be using
DateTime::Locale (3pm) - Localization support for DateTime.pm
db5.3_hotbackup (1) - Create "hot backup" or "hot failover" snapshots
db5.3_upgrade (1) - Upgrade the Berkeley DB version to the current release...
dblink_build_sql_delete (3) - builds a DELETE statement using supplied values...
dblink_build_sql_insert (3) - builds an INSERT statement using a local tuple,...
dblink_build_sql_update (3) - builds an UPDATE statement using a local tuple,...
dbus-cleanup-sockets (1) - clean up leftover sockets in a directory
deactivate_locked_super (9) - drop an active reference to superblock
deactivate_super (9) - drop an active reference to superblock
debconf-updatepo (1) - update PO files about debconf templates
delgroup (8) - remove a user or group from the system
deluser (8) - remove a user or group from the system
deluser.conf (5) - configuration file for deluser(8) and delgroup(8) .
dentry_update_name_case (9) - update case insensitive dentry with a new name
dev_change_proto_down (9) - update protocol port state information
dev_set_allmulti (9) - update allmulti count on a device
dev_set_group (9) - Change group this device belongs to
dev_set_promiscuity (9) - update promiscuity count on a device
device_create_with_groups (9) - creates a device and registers it with sysfs
devm_clk_get (9) - lookup and obtain a managed reference to a clock produ...
dh_auto_clean (1) - automatically cleans up after a build
dh_autotools-dev_updateconfig (1) - update config.sub and config.guess
dh_clean (1) - clean up package build directories
dh_icons (1) - Update caches of Freedesktop icons
dh_installifupdown (1) - install if-up and if-down hooks
dh_installpam (1) - install pam support files
dh_installppp (1) - install ppp ip-up and ip-down files
dh_perl (1) - calculates Perl dependencies and cleans up after MakeM...
dh_prep (1) - perform cleanups in preparation for building a binary ...
dh_pysupport (1) - use the python-support framework to handle Python modules
dig (1) - DNS lookup utility
dircolors (1) - color setup for ls
DirHandle (3perl) - supply object methods for directory handles
disk_part_iter_exit (9) - finish up partition iteration
dma_buf_mmap (9) - Setup up a userspace mmap with the given vma
dnscache-conf (8) - sets up a DNS cache service.
dnsip (1) - lookup IP addresses
dnsipq (1) - dns lookup tool
dnsname (1) - does a reverse lookup for the IP address
dnstrace (1) - dns lookup tool
dnstracesort (1) - dns lookup tool
do_signal_stop (9) - handle group stop for SIGSTOP and other stop signals
doveadm-deduplicate (1) - expunge duplicate messages
doveadm-user (1) - Perform a user lookup in Dovecot's userdbs
Dpkg::BuildOptions (3) - parse and update build options
DSA_dup_DH (3ssl) - create a DH structure out of DSA structure
dup (2) - duplicate a file descriptor
dup2 (2) - duplicate a file descriptor
dup3 (2) - duplicate a file descriptor
duplocale (3) - duplicate a locale object
elfedit (1) - Update the ELF header of ELF files.
Encode::Supported (3perl) - - Encodings supported by Encode
endgrent (3) - get group file entry
engine (3ssl) - ENGINE cryptographic module support
envz (3) - environment string support
envz_add (3) - environment string support
envz_entry (3) - environment string support
envz_get (3) - environment string support
envz_merge (3) - environment string support
envz_remove (3) - environment string support
envz_strip (3) - environment string support
errstr (1ssl) - lookup error codes
eth_header_cache_update (9) - update cache entry
ether_setup (9) - setup Ethernet network device
EVP_CipherUpdate (3ssl) - EVP cipher routines
EVP_DecodeUpdate (3ssl) - EVP base 64 encode/decode routines
EVP_DecryptUpdate (3ssl) - EVP cipher routines
EVP_DigestSignUpdate (3ssl) - EVP signing functions
EVP_DigestUpdate (3ssl) - EVP digest routines
EVP_DigestVerifyUpdate (3ssl) - EVP signature verification functions
EVP_EncodeUpdate (3ssl) - EVP base 64 encode/decode routines
EVP_EncryptUpdate (3ssl) - EVP cipher routines
EVP_OpenUpdate (3ssl) - EVP envelope decryption
EVP_SealUpdate (3ssl) - EVP envelope encryption
EVP_SignUpdate (3ssl) - EVP signing functions
EVP_VerifyUpdate (3ssl) - EVP signature verification functions
feupdateenv (3) - floating-point rounding and exception handling
fgetgrent (3) - get group file entry
fgetgrent_r (3) - get group file entry reentrantly
File::Tail (3pm) - Perl extension for reading from continuously updated f...
file_update_time (9) - update mtime and ctime time
FileHandle (3perl) - supply object methods for filehandles
find_busiest_group (9) - Returns the busiest group within the sched_domain if...
finish_wait (9) - clean up after waiting in a queue
fix_small_imbalance (9) - Calculate the minor imbalance that exists amongst t...
fixup_owner (9) - Post lock pi_state and corner case management
follow_pfn (9) - look up PFN at a user virtual address
free_irq (9) - free an interrupt allocated with request_irq
free_percpu_irq (9) - free an interrupt allocated with request_percpu_irq
freeze_super (9) - lock the filesystem and force it into a consistent state
freshclam (1) - update virus databases
freshclam.conf (5) - Configuration file for Clam AntiVirus database update ...
fsl_rio_setup (9) - Setup Freescale PowerPC RapidIO interface
fusion_exit (9) - Perform driver unload cleanup.
futex_wait_queue_me (9) - queue_me and wait for wakeup, timeout, or signal
gadget_is_altset_supported (9) - return true iff the hardware supports altset...
gadget_is_stall_supported (9) - return true iff the hardware supports stalling
gadget_is_superspeed (9) - return true if the hardware handles superspeed
gadget_is_superspeed_plus (9) - return true if the hardware handles superspee...
gadget_is_zlp_supported (9) - return true iff the hardware supports zlp
generic_shutdown_super (9) - common helper for - >kill_sb
genphy_read_status (9) - check the link status and update current link state
genphy_setup_forced (9) - configures/forces speed/duplex from phydev
genphy_update_link (9) - update link status in phydev
Geo::IP (3pm) - Look up location and network information by IP Address
geoiplookup (1) - look up country using IP Address or hostname
geoiplookup6 (1) - look up country using IP Address or hostname
get_super (9) - get the superblock of a device
get_super_thawed (9) - get thawed superblock of a device
getegid (2) - get group identity
getegid32 (2) - get group identity
getgid (2) - get group identity
getgid32 (2) - get group identity
getgrent (3) - get group file entry
getgrent_r (3) - get group file entry reentrantly
getgrgid (3) - get group file entry
getgrgid_r (3) - get group file entry
getgrnam (3) - get group file entry
getgrnam_r (3) - get group file entry
getgrouplist (3) - get list of groups to which a user belongs
getgroups (2) - get/set list of supplementary group IDs
getgroups32 (2) - get/set list of supplementary group IDs
getresgid (2) - get real, effective and saved user/group IDs
getresgid32 (2) - get real, effective and saved user/group IDs
getresuid (2) - get real, effective and saved user/group IDs
getresuid32 (2) - get real, effective and saved user/group IDs
gettextize (1) - install or upgrade gettext infrastructure
git (1) - the stupid content tracker
git-cherry (1) - Find commits yet to be applied to upstream
git-gc (1) - Cleanup unnecessary files and optimize the local repos...
git-push (1) - Update remote refs along with associated objects
git-rebase (1) - Forward-port local commits to the updated upstream head
git-sh-i18n (1) - Git's i18n setup code for shell scripts
git-sh-setup (1) - Common Git shell script setup code
git-submodule (1) - Initialize, update or inspect submodules
git-update-index (1) - Register file contents in the working tree to the index
git-update-ref (1) - Update the object name stored in a ref safely
git-update-server-info (1) - Update auxiliary info file to help dumb servers
git-upload-archive (1) - Send archive back to git-archive
git-upload-pack (1) - Send objects packed back to git-fetch-pack
GnuPG::Fingerprint (3pm) - GnuPG Fingerprint Objects
GnuPG::Handles (3pm) - GnuPG handles bundle
GnuPG::Interface (3pm) - Perl interface to GnuPG
GnuPG::Key (3pm) - GnuPG Key Object
GnuPG::Options (3pm) - GnuPG options embodiment
GnuPG::PrimaryKey (3pm) - GnuPG Primary Key Objects
GnuPG::PublicKey (3pm) - GnuPG Public Key Objects
GnuPG::Revoker (3pm) - GnuPG Key Revoker Objects
GnuPG::SecretKey (3pm) - GnuPG Secret Key Objects
GnuPG::Signature (3pm) - GnuPG Key Signature Objects
GnuPG::SubKey (3pm) - GnuPG Sub Key objects
GnuPG::Tie (3pm) - Tied filehandle interface to encryption with the GNU P...
GnuPG::UserAttribute (3pm) - GnuPG User Attribute Objects
GnuPG::UserId (3pm) - GnuPG User ID Objects
gpasswd (1) - administer /etc/group and /etc/gshadow
gpg-agent (1) - Secret key management for GnuPG
gpgconf (1) - Modify .gnupg home directories
group (5) - user group file
group.conf (5) - configuration file for the pam_group module
group_member (3) - test whether a process is in a group
groupadd (8) - create a new group
groupdel (8) - delete a group
groupmod (8) - modify a group definition on the system
groups (1) - print the groups a user is in
grpck (8) - verify integrity of group files
grpconv (8) - convert to and from shadow passwords and groups
grpunconv (8) - convert to and from shadow passwords and groups
grub-bios-setup (8) - set up a device to boot using GRUB
gshadow (5) - shadowed group file
gtk-update-icon-cache (1) - Icon theme caching utility
Guard (3pm) - safe cleanup blocks
handle_early_requeue_pi_wakeup (9) - Detect early wakeup on the initial futex
Hash::Util::FieldHash (3perl) - Support for Inside-Out Classes
HMAC_Update (3ssl) - HMAC message authentication code
host (1) - DNS lookup utility
hosts (5) - static table lookup for hostnames
htcacheclean (8) - Clean up the disk cache
id (1) - print real and effective user and group IDs
idr_get_next (9) - lookup next object of id to given id.
iio_triggered_buffer_setup (9) - Setup triggered buffer and pollfunc
ilookup5 (9) - search for an inode in the inode cache
ilookup5_nowait (9) - search for an inode in the inode cache
ilsel_enable_fixed (9) - Enable an ILSEL set at a fixed interrupt level
inetd (8) - internet "super-server"
inetd.conf (5) - internet "super-server"
initgroups (3) - initialize the supplementary group access list
inode_sb_list_add (9) - add inode to the superblock list of inodes
input_ff_upload (9) - upload effect into force-feedback device
input_free_device (9) - free memory occupied by input_dev structure
interfaces (5) - network interface configuration for ifup and ifdown
IO::AtomicFile (3pm) - write a file which is updated atomically
IO::Dir (3perl) - supply object methods for directory handles
IO::File (3perl) - supply object methods for filehandles
IO::Handle (3perl) - supply object methods for I/O handles
IO::Pipe (3perl) - supply object methods for pipes
IO::Seekable (3perl) - supply seek based methods for I/O objects
IO::Socket::IP (3perl) - Family-neutral IP socket supporting both IPv4 and IPv6
ip-token (8) - tokenized interface identifier support
ip6tables-apply (8) - a safer way to update iptables remotely
ipc_update_perm (9) - update the permissions of an ipc object
iptables-apply (8) - a safer way to update iptables remotely
irq_chip_ack_parent (9) - Acknowledge the parent interrupt
irq_chip_disable_parent (9) - Disable the parent interrupt (defaults to mask ...
irq_chip_enable_parent (9) - Enable the parent interrupt (defaults to unmask ...
irq_chip_eoi_parent (9) - Invoke EOI on the parent interrupt
irq_chip_mask_parent (9) - Mask the parent interrupt
irq_chip_retrigger_hierarchy (9) - Retrigger an interrupt in hardware
irq_chip_set_affinity_parent (9) - Set affinity on the parent interrupt
irq_chip_set_type_parent (9) - Set IRQ type on the parent interrupt
irq_chip_set_vcpu_affinity_parent (9) - Set vcpu affinity on the parent inter...
irq_chip_set_wake_parent (9) - Set/reset wake-up on the parent interrupt
irq_chip_unmask_parent (9) - Unmask the parent interrupt
irq_disable (9) - Mark interrupt disabled
irq_gc_ack_set_bit (9) - Ack pending interrupt via setting bit
irq_get_irqchip_state (9) - returns the irqchip state of a interrupt.
irq_set_irqchip_state (9) - set the state of a forwarded interrupt.
irq_set_vcpu_affinity (9) - Set vcpu affinity for the interrupt
irq_setup_alt_chip (9) - Switch to alternative chip
irq_setup_generic_chip (9) - Setup a range of interrupts with a generic chip
irqbalance (1) - distribute hardware interrupts across processors on a ...
isupper (3) - character classification functions
isupper_l (3) - character classification functions
iswupper (3) - test for uppercase wide character
iterate_supers_type (9) - call function for superblocks of given type
jbd2_journal_get_write_access (9) - notify intent to modify a buffer for meta...
jbd2_journal_lock_updates (9) - establish a transaction barrier.
jbd2_journal_set_features (9) - Mark a given journal feature in the superblock
jbd2_journal_unlock_updates (9) - release barrier
jbd2_journal_update_sb_errno (9) - Update error in the journal.
kfifo_dma_in_prepare (9) - setup a scatterlist for DMA input
kfifo_dma_out_prepare (9) - setup a scatterlist for DMA output
kgdb_roundup_cpus (9) - Get other CPUs into a holding pattern
kmemdup (9) - duplicate region of memory
ksplice-apply (8) - Apply an on-disk Ksplice update to the running kernel
ksplice-create (8) - Create a set of kernel modules for a rebootless kernel...
ksplice-undo (8) - Undo a Ksplice update that has been applied to the run...
ksplice-view (8) - View in-kernel or on-disk Ksplice kernel updates
kstat_irqs (9) - Get the statistics for an interrupt
kstat_irqs_cpu (9) - Get the statistics for an interrupt on a cpu
kstat_irqs_usr (9) - Get the statistics for an interrupt
kstrdup_const (9) - conditionally duplicate an existing const string
locale (7) - description of multilanguage support
lookup_bdev (9) - lookup a struct block_device by name
lookup_dcookie (2) - return a directory entry's path
lookup_one_len (9) - filesystem helper to lookup single pathname component
lookup_one_len_unlocked (9) - filesystem helper to lookup single pathname com...
lookup_resource (9) - find an existing resource by a resource start address
losetup (8) - set up and control loop devices
lscgroup (1) - list all cgroups
lspgpot (1) - extracts the ownertrust values from PGP keyrings and l...
luit (1) - Locale and ISO 2022 support for Unicode terminals
LWP::Protocol::https (3pm) - Provide https support for LWP::UserAgent
lxc-cgroup (1) - manage the control group associated with a container
lxc-checkconfig (1) - check the current kernel for lxc support
Mail::GnuPG (3pm) - Process email with GPG.
Mail::Message::Field::AddrGroup (3pm) - A group of Mail::Message::Field::Addr...
Mail::SpamAssassin (3pm) - Spam detector and markup engine
Mail::SpamAssassin::Bayes (3pm) - support for learning classifiers
Mail::SpamAssassin::Plugin::AskDNS (3pm) - form a DNS query using tag values,...
Mail::SpamAssassin::Plugin::ASN (3pm) - SpamAssassin plugin to look up the Au...
Mail::SpamAssassin::Plugin::DNSEval (3pm) - look up URLs against DNS blocklists
Mail::SpamAssassin::Plugin::Rule2XSBody (3pm) - speed up SpamAssassin by comp...
Mail::SpamAssassin::Plugin::URIDNSBL (3pm) - look up URLs against DNS blocklists
Mail::SpamAssassin::Util::Progress (3pm) - Progress bar support for SpamAssassin
make (1) - GNU make utility to maintain groups of programs
mandb (8) - create or update the manual page index caches
maple_getcond_callback (9) - setup handling MAPLE_COMMAND_GETCOND
Mason::Manual::Setup (3pm) - Setting up Mason
Mason::Manual::UpgradingFromMason1 (3pm) - Summary of differences between Mas...
Math::BigInt::Calc (3perl) - Pure Perl module to support Math::BigInt
MD2_Update (3ssl) - MD2, MD4, and MD5 hash functions
MD4_Update (3ssl) - MD2, MD4, and MD5 hash functions
MD5_Update (3ssl) - MD2, MD4, and MD5 hash functions
MDC2_Update (3ssl) - MDC2 hash function
mdio_bus_match (9) - determine if given MDIO driver supports the given MDIO...
memdup_user (9) - duplicate memory region from user space
memdup_user_nul (9) - duplicate memory region from user space and NUL-terminate
mkswap (8) - set up a Linux swap area
ModPerl::MethodLookup (3pm) - - Lookup mod_perl modules, objects and methods
Module::Load::Conditional (3perl) - Looking up module information / loading a...
Moo::Role (3pm) - Minimal Object Orientation support for Roles
Moose::Exception (3pm) - Superclass for Moose internal exceptions
Moose::Manual::Support (3pm) - Policies regarding support, releases, and comp...
MooseX::StrictConstructor (3pm) - Make your object constructors blow up on un...
mpt_do_upload (9) - Construct and Send FWUpload request to MPT adapter port.
mpt_inactive_raid_volumes (9) - sets up link list of phy_disk_nums for device...
mpt_interrupt (9) - MPT adapter (IOC) specific interrupt handler.
mpt_ioc_reset (9) - Base cleanup for hard reset
mptscsih_getclear_scsi_lookup (9) - retrieves and clears scmd entry from Scsi...
mptscsih_set_scsi_lookup (9) - write a scmd entry into the ScsiLookup[] array...
mptspi_setTargetNegoParms (9) - Update the target negotiation parameters
msguniq (1) - unify duplicate translations in message catalog
msleep (9) - sleep safely even with waitqueue interruptions
msleep_interruptible (9) - sleep waiting for signals
mutex_lock_interruptible (9) - acquire the mutex, interruptible
mysql_upgrade (1) - check and upgrade MySQL tables
mysqld_safe (1) - MySQL server startup script
mysqldump (1) - a database backup program
mysqlhotcopy (1) - a database backup program
nand_setup_read_retry (9) - [INTERN] Set the READ RETRY mode
nand_update_bbt (9) - update bad block table(s)
Net::DNS::Update (3pm) - DNS dynamic update packet
Net::SMTP::SSL (3pm) - SSL support for Net::SMTP
Net::SSH2 (3pm) - Support for the SSH 2 protocol via libssh2.
netdev_all_upper_get_next_dev_rcu (9) - Get the next dev from upper list
netdev_boot_setup_check (9) - check boot time settings
netdev_has_upper_dev (9) - Check if device is linked to an upper device
netdev_master_upper_dev_get (9) - Get master upper device
netdev_master_upper_dev_get_rcu (9) - Get master upper device
netdev_master_upper_dev_link (9) - Add a master link to the upper device
netdev_update_features (9) - recalculate device features
netdev_upper_dev_link (9) - Add a link to the upper device
netdev_upper_dev_unlink (9) - Removes a link to upper device
netdev_upper_get_next_dev_rcu (9) - Get the next dev from upper list
newusers (8) - update and create new users in batch
nmblookup (1) - NetBIOS over TCP/IP client used to lookup NetBIOS names
nohup (1) - run a command immune to hangups, with output to a non-tty
nsupdate (1) - Dynamic DNS update utility
pagecache_isize_extended (9) - update pagecache after extension of i_size
pam-auth-update (8) - manage PAM configuration using packaged profiles
pam_chauthtok (3) - updating authentication tokens
pam_group (8) - PAM module for group access
pam_set_item (3) - set and update PAM informations
pam_wheel (8) - Only permit root access to members of group wheel
pandoc (1) - general markup converter
parport_release (9) - give up access to a parallel port device
pci_check_and_mask_intx (9) - mask INTx on pending interrupt
pci_check_and_unmask_intx (9) - unmask INTx if no interrupt is pending
pci_dev_run_wake (9) - Check if device can generate run-time wake-up events.
pci_intx_mask_supported (9) - probe for INTx masking support
pci_lost_interrupt (9) - reports a lost PCI interrupt
pci_msi_create_irq_domain (9) - Create a MSI interrupt domain
pci_msi_mask_irq (9) - Generic irq chip callback to mask PCI/MSI interrupts
pci_msi_unmask_irq (9) - Generic irq chip callback to unmask PCI/MSI interrupts
pci_remove_resource_files (9) - cleanup resource files
pci_remove_sysfs_dev_files (9) - cleanup PCI specific sysfs files
pci_sriov_get_totalvfs (9) - - get total VFs supported on this device
pci_wake_from_d3 (9) - enable/disable device to wake up from D3_hot or D3_cold
perf_event_open (2) - set up performance monitoring
Perl4::CoreLibs (3pm) - libraries historically supplied with Perl 4
perldoc (1) - Look up Perl documentation in Pod format.
perldtrace (1) - Perl's support for DTrace
perlunicode (1) - Unicode support in Perl
pg_archivecleanup (1) - clean up PostgreSQL WAL archive files
pg_basebackup (1) - take a base backup of a PostgreSQL cluster
pg_standby (1) - supports the creation of a PostgreSQL warm standby server
pg_updatedicts (8) - build PostgreSQL dictionaries from myspell/hunspell ones
pg_upgrade (1) - upgrade a PostgreSQL server instance
pg_upgradecluster (1) - upgrade an existing PostgreSQL cluster to a new major...
pgrep (1) - look up or signal processes based on name and other at...
pgrphack (8) - runs a program in a separate process group.
phy_change (9) - Scheduled by the phy_interrupt/timer to handle PHY cha...
phy_check_valid (9) - check if there is a valid PHY setting which matches sp...
phy_clear_interrupt (9) - Ack the phy device's interrupt
phy_config_interrupt (9) - configure the PHY device for the requested interrupts
phy_disable_interrupts (9) - Disable the PHY interrupts from the PHY side
phy_disconnect (9) - disable interrupts, stop state machine, and detach a P...
phy_enable_interrupts (9) - Enable the interrupts from the PHY side
phy_ethtool_get_eee (9) - get EEE supported and status
phy_ethtool_set_eee (9) - set EEE supported and status
phy_find_setting (9) - find a PHY settings array entry that matches speed & d...
phy_interrupt (9) - PHY interrupt handler
phy_register_fixup (9) - creates a new phy_fixup and adds it to the list
phy_sanitize_settings (9) - make sure the PHY is set to supported speed and d...
phy_start_interrupts (9) - request and enable interrupts for a PHY device
phy_stop_interrupts (9) - disable interrupts from a PHY device
pigeonhole (7) - Overview of the Pigeonhole project's Sieve support for...
pinentry (1) - PIN or pass-phrase entry dialog for GnuPG
pinentry-gtk-2 (1) - PIN or pass-phrase entry dialog for GnuPG
pinentry-x11 (1) - PIN or pass-phrase entry dialog for GnuPG
pkill (1) - look up or signal processes based on name and other at...
Pod::Perldoc (3perl) - Look up Perl documentation in Pod format.
postmap (1) - Postfix lookup table management
postsuper (1) - Postfix superintendent
proxymap (8postfix) - Postfix lookup table proxy server
pskb_trim_rcsum (9) - trim received skb and update checksum
pthread_cleanup_pop (3) - push and pop thread cancellation clean-up handlers
pthread_cleanup_pop_restore_np (3) - push and pop thread cancellation clean-u...
pthread_cleanup_push (3) - push and pop thread cancellation clean-up handlers
pthread_cleanup_push_defer_np (3) - push and pop thread cancellation clean-up...
pure-quotacheck (8) - Update virtual quota files for Pure-FTPd
pure-uploadscript (8) - Automatically run an external program after a success...
putgrent (3) - write a group database entry to a file
pwconv (8) - convert to and from shadow passwords and groups
pwm_get (9) - look up and request a PWM device
pwunconv (8) - convert to and from shadow passwords and groups
pysetup3.4 (1) - pysetup tool
rbldns-conf (8) - sets up an IP-address-listing DNS service.
Regexp::Common::_support (3pm) - - Support functions for Regexp::Common.
register_adapter_interrupt (9) - register adapter interrupt handler
regulator_bulk_register_supply_alias (9) - register multiple aliases
regulator_bulk_unregister_supply_alias (9) - unregister multiple aliases
regulator_get (9) - lookup and obtain a reference to a regulator.
regulator_is_supported_voltage (9) - check if a voltage range can be supported
regulator_list_voltage (9) - enumerate supported voltages
regulator_register_supply_alias (9) - Provide device alias for supply lookup
regulator_unregister_supply_alias (9) - Remove device alias
relay_late_setup_files (9) - triggers file creation
relay_subbufs_consumed (9) - update the buffer's sub-buffers-consumed count
remove_irq (9) - free an interrupt
request_any_context_irq (9) - allocate an interrupt line
request_percpu_irq (9) - allocate a percpu interrupt line
request_threaded_irq (9) - allocate an interrupt line
reservation_object_get_excl (9) - get the reservation object's exclusive fenc...
reservation_object_get_fences_rcu (9) - Get an object's shared and exclusive ...
reservation_object_get_list (9) - get the reservation object's shared fence l...
restart_syscall (2) - restart a system call after interruption by a stop signal
rio_remove_sysfs_dev_files (9) - cleanup RIO specific sysfs files
rio_request_dma (9) - request RapidIO capable DMA channel that supports spec...
rio_setup_device (9) - Allocates and sets up a RIO device
rio_setup_inb_dbell (9) - bind inbound doorbell callback
rio_update_route_tables (9) - Updates route tables in switches
RIPEMD160_Update (3ssl) - RIPEMD-160 hash function
round_jiffies_up (9) - function to round jiffies up to a full second
round_jiffies_up_relative (9) - function to round jiffies up to a full second
rpc_count_iostats (9) - tally up per-task stats
rpc_count_iostats_metrics (9) - tally up per-task stats
rpc_queue_upcall (9) - queue an upcall message to userspace
rpc_wake_up (9) - wake up all rpc_tasks
rpc_wake_up_status (9) - wake up all rpc_tasks and set their status value.
rrdcreate (1) - Set up a new Round Robin Database
rrdlastupdate (1) - Return the most recent update to an RRD
rrdupdate (1) - Store a new set of values into the RRD
rt_sigreturn (2) - return from signal handler and cleanup stack frame
rtcwake (8) - enter a system sleep state until specified wakeup time
runuser (1) - run a command with substitute user and group ID
sa-update (1p) - automate SpamAssassin rule updates
sas_tlr_supported (9) - checking TLR bit in vpd 0x90
sb_end_intwrite (9) - drop write access to a superblock for internal fs purp...
sb_end_pagefault (9) - drop write access to a superblock from a page fault
sb_end_write (9) - drop write access to a superblock
sb_start_pagefault (9) - get write access to a superblock from a page fault
sb_start_write (9) - get write access to a superblock
SCPNT_TO_LOOKUP_IDX (9) - searches for a given scmd in the ScsiLookup[] array...
scsi_alloc_sdev (9) - allocate and setup a scsi_Device
scsi_device_lookup_by_target (9) - find a device given the target
scsi_device_supports_vpd (9) - test if a device supports VPD pages
scsi_init_devinfo (9) - set up the dynamic device list.
scsi_report_opcode (9) - Find out if a given command opcode is supported
selabel_lookup_raw (3) - obtain SELinux security context from a string label
selinux_status_updated (3) - reference the SELinux kernel status without invo...
set_pfnblock_flags_mask (9) - Set the requested group of flags for a pagebloc...
setegid (2) - set effective user or group ID
seteuid (2) - set effective user or group ID
setfsgid (2) - set group identity used for filesystem checks
setfsgid32 (2) - set group identity used for filesystem checks
setgid (2) - set group identity
setgid32 (2) - set group identity
setgrent (3) - get group file entry
setgroups (2) - get/set list of supplementary group IDs
setgroups32 (2) - get/set list of supplementary group IDs
setregid (2) - set real and/or effective user or group ID
setregid32 (2) - set real and/or effective user or group ID
setresgid (2) - set real, effective and saved user or group ID
setresgid32 (2) - set real, effective and saved user or group ID
setresuid (2) - set real, effective and saved user or group ID
setresuid32 (2) - set real, effective and saved user or group ID
setreuid (2) - set real and/or effective user or group ID
setreuid32 (2) - set real and/or effective user or group ID
setsid (2) - creates a session and sets the process group ID
setup (2) - setup devices and filesystems, mount root filesystem
setup_irq (9) - setup an interrupt
setup_per_zone_wmarks (9) - called when min_free_kbytes changes or when memor...
setupcon (1) - sets up the font and the keyboard on the console
sg (1) - execute command as different group ID
sget (9) - find or create a superblock
sget_userns (9) - find or create a superblock
sh64_setup_tlb_slot (9) - Load up a translation in a wired slot.
sh64_tlb_init (9) - Perform initial setup for the DTLB and ITLB.
SHA1_Update (3ssl) - Secure Hash Algorithm
shrink_dcache_sb (9) - shrink dcache for a superblock
shutdown (2) - shut down part of a full-duplex connection
sigpause (3) - atomically release blocked signals and wait for interrupt
sigreturn (2) - return from signal handler and cleanup stack frame
sil_dev_config (9) - Apply device/host-specific errata fixups
sk_state_store (9) - update sk->sk_state
skb_checksum_setup (9) - set up partial checksum offset
skb_clone (9) - duplicate an sk_buff
skb_padto (9) - pad an skbuff up to a minimal size
skb_partial_csum_set (9) - set up and verify partial csum values for packet
skb_postpull_rcsum (9) - update checksum for received skb after pull
skb_postpush_rcsum (9) - update checksum for received skb after push
skb_pull_rcsum (9) - pull skb and update receive checksum
skb_push_rcsum (9) - push skb and update receive checksum
skb_put_padto (9) - increase size and pad an skbuff up to a minimal size
skcipher_request_set_tfm (9) - update cipher handle reference in request
slapo-dyngroup (5) - Dynamic Group overlay to slapd
slapo-memberof (5) - Reverse Group Membership overlay to slapd
smbspool_krb5_wrapper (8) - This is a CUPS printing backend which calls smbspool
smbtar (1) - shell script for backing up SMB/CIFS shares directly t...
snd_ac97_tune_hardware (9) - tune up the hardware
snd_ac97_update (9) - update the value on the given register
snd_ac97_update_bits (9) - update the bits on the given register
snd_ac97_update_power (9) - update the powerdown register
snd_ac97_write_cache (9) - write a value on the given register and update the...
snd_card_add_dev_attr (9) - Append a new sysfs attribute group to card
snd_lookup_minor_data (9) - get user data of a registered device
snd_mpu401_uart_interrupt (9) - generic MPU401-UART interrupt handler
snd_mpu401_uart_interrupt_tx (9) - generic MPU401-UART transmit irq handler
snd_pcm_group_for_each_entry (9) - iterate over the linked substreams
snd_pcm_period_elapsed (9) - update the pcm status for the next period
snd_soc_add_codec_controls (9) - add an array of controls to a codec. Conveni...
snd_soc_component_update_bits (9) - Perform read/modify/write cycle
snd_soc_component_update_bits_async (9) - Perform asynchronous read/modify/wr...
snd_soc_update_bits (9) - update codec register bits
socketmap_table (5) - Postfix socketmap table lookup client
sparse_keymap_setup (9) - set up sparse keymap for an input device
spi_busnum_to_master (9) - look up master associated with bus_num
SPI_copytuple (3) - make a copy of a row in the upper executor context
SPI_cursor_open (3) - set up a cursor using a statement created with SPI_pre...
SPI_cursor_open_with_args (3) - set up a cursor using a query and parameters
SPI_cursor_open_with_paramlist (3) - set up a cursor using parameters
SPI_freetuple (3) - free a row allocated in the upper executor context
SPI_freetuptable (3) - free a row set created by SPI_execute or a similar fun...
SPI_modifytuple (3) - create a row by replacing selected fields of a given row
SPI_palloc (3) - allocate memory in the upper executor context
SPI_pfree (3) - free memory in the upper executor context
SPI_repalloc (3) - reallocate memory in the upper executor context
SPI_returntuple (3) - prepare to return a tuple as a Datum
spi_setup (9) - setup SPI mode and clock rate
ssh-pkcs11-helper (8) - ssh-agent helper program for PKCS#11 support
SSL_get_secure_renegotiation_support (3ssl) - manipulate SSL options
startpar-upstart-inject (8) - notify startpar of started/stopped upstart jobs
strdup (3) - duplicate a string
strdupa (3) - duplicate a string
strndup (3) - duplicate a string
strndupa (3) - duplicate a string
struct_ccwgroup_device (9) - ccw group device
struct_ccwgroup_driver (9) - driver for ccw group devices
struct_ieee80211_supported_band (9) - frequency band definition
struct_iio_buffer_setup_ops (9) - buffer setup related callbacks
struct_irb (9) - interruption response block
struct_irq_chip (9) - hardware interrupt chip descriptor
struct_irq_chip_type (9) - Generic interrupt chip instance for a flow type
struct_irqaction (9) - per interrupt action descriptor
struct_regulator_consumer_supply (9) - supply - > device mapping
struct_snd_soc_jack_pin (9) - Describes a pin to update based on jack detection
struct_thread_group_cputimer (9) - thread group interval timer counts
struct_usb_composite_driver (9) - groups configurations into a gadget
struct_usb_sg_request (9) - support for scatter/gather I/O
su (1) - change user ID or become superuser
Sub::Exporter::Cookbook (3pm) - useful, demonstrative, or stupid Sub::Exporte...
Sub::Uplevel (3pm) - apparently run a function in a higher stack frame
superhyway_add_device (9) - Add a SuperHyway module
superhyway_register_driver (9) - Register a new SuperHyway driver
superhyway_unregister_driver (9) - Unregister a SuperHyway driver
supervise (8) - starts and monitors a service.
svc (8) - controls services monitored by supervise(8).
svok (8) - checks whether supervise(8) is running.
svstat (8) - prints the status of services monitored by supervise (8).
sync_mapping_buffers (9) - write out & wait upon a mapping's “associated”...
sysfs_add_file_to_group (9) - add an attribute file to a pre-existing group.
sysfs_chmod_file (9) - update the modified mode value on an object attribute.
sysfs_remove_file_from_group (9) - remove an attribute file from a group.
systemd-analyze (1) - Analyze system boot-up performance
systemd-cgls (1) - Recursively show control group contents
systemd-cgtop (1) - Show top control groups by their resource usage
systemd-cryptsetup-generator (8) - Unit generator for /etc/crypttab
systemd-cryptsetup@.service (8) - Full disk decryption logic
systemd-notify (1) - Notify service manager about start-up completion and o...
systemd-system-update-generator (8) - Generator for redirecting boot to offli...
systemd-sysusers (8) - Allocate system users and groups
systemd-sysusers.service (8) - Allocate system users and groups
systemd-tmpfiles (8) - Creates, deletes and cleans up volatile and temporary ...
systemd-tmpfiles-clean.service (8) - Creates, deletes and cleans up volatile ...
systemd-tmpfiles-clean.timer (8) - Creates, deletes and cleans up volatile an...
systemd-tmpfiles-setup-dev.service (8) - Creates, deletes and cleans up volat...
systemd-tmpfiles-setup.service (8) - Creates, deletes and cleans up volatile ...
systemd-update-utmp (8) - Write audit and utmp updates at bootup, runlevel ch...
systemd-update-utmp-runlevel.service (8) - Write audit and utmp updates at bo...
systemd-update-utmp.service (8) - Write audit and utmp updates at bootup, run...
sysusers.d (5) - Declarative allocation of system users and groups
Task::Weaken (3pm) - Ensure that a platform has weaken support
task_participate_group_stop (9) - participate in a group stop
tcp_table (5) - Postfix client/server table lookup protocol
tee (2) - duplicating pipe content
Text::CharWidth (3pm) - Get number of occupied columns of a string on terminal
Text::WrapI18N (3pm) - Line wrapping module with support for multibyte, fullw...
thaw_super (9) - - unlock filesystem
threadgroup_change_begin (9) - mark the beginning of changes to a threadgroup
threadgroup_change_end (9) - mark the end of changes to a threadgroup
threads (3ssl) - OpenSSL thread support
tinydns-conf (8) - sets up a DNS publication service.
tolower (3) - convert uppercase or lowercase
tolower_l (3) - convert uppercase or lowercase
toupper (3) - convert uppercase or lowercase
toupper_l (3) - convert uppercase or lowercase
towupper (3) - convert a wide character to uppercase
towupper_l (3) - convert a wide character to uppercase
transport_configure_device (9) - configure an already set up device
transport_setup_device (9) - declare a new dev for transport class associatio...
truncate_setsize (9) - update inode and pagecache for a new file size
Type::Registry (3pm) - a glorified hashref for looking up type constraints
Type::Tiny::XS::Util (3pm) - support functions for Type::Tiny::XS
typedef_handle_t (9) - The handle_t type represents a single atomic update be...
Types::Standard::Tuple (3pm) - internals for the Types::Standard Tuple type c...
uart_set_options (9) - setup the serial console parameters
uart_update_timeout (9) - update per-port FIFO timeout.
ucf (1) - Update Configuration File: preserve user changes in co...
ucfr (1) - Update Configuration File Registry: associate packages...
UI_dup_error_string (3ssl) - New User Interface
UI_dup_info_string (3ssl) - New User Interface
UI_dup_input_boolean (3ssl) - New User Interface
UI_dup_input_string (3ssl) - New User Interface
UI_dup_verify_string (3ssl) - New User Interface
uio_event_notify (9) - trigger an interrupt event
unix_update (8) - Helper binary that updates the password of a given user
unlock_new_inode (9) - clear the I_NEW state and wake up any waiters
unregister_adapter_interrupt (9) - unregister adapter interrupt handler
UPDATE (7) - update rows of a table
update-alternatives (8) - maintain symbolic links determining default commands
update-binfmts (8) - maintain registry of executable binary formats
update-ca-certificates (8) - update /etc/ssl/certs and certificates.crt
update-catalog (8) - create or update entry in SGML catalog file
update-default-aspell (8) - rebuild aspell database and emacsen stuff
update-default-ispell (8) - update default ispell dictionary
update-default-wordlist (8) - update default wordlist
update-dictcommon-aspell (8) - rebuild aspell database and emacsen stuff
update-dictcommon-hunspell (8) - rebuild hunspell database and emacsen stuff
update-dlocatedb (8) - generate text database of installed files for dlocate
update-grub (8) - stub for grub-mkconfig
update-grub2 (8) - stub for grub-mkconfig
update-icon-caches (8) - Update wrapper script for the icon caches
update-inetd (8) - create, remove, enable or disable entry in /etc/inetd....
update-initramfs (8) - generate an initramfs image
update-initramfs.conf (5) - configuration file for update-initramfs
update-java-alternatives (8) - update alternatives for jre/sdk installations
update-locale (8) - Modify global locale settings
update-mime (8) - create or update MIME information
update-mime-database (1) - a program to build the Shared MIME-Info database c...
update-passwd (8) - safely update /etc/passwd, /etc/shadow and /etc/group
update-pciids (8) - download new version of the PCI ID list
update-python-modules (8) - byte-compile python modules
update-rc.d (8) - install and remove System-V style init script links
update-service (8) - add/remove a service to/from system-wide service super...
update-smart-drivedb (8) - update smartmontools drive database
update-usbids (8) - download new version of the USB ID list
update-xmlcatalog (8) - maintain XML catalog files
update_cfs_rq_load_avg (9) - update the cfs_rq's load/util averages
update_sd_lb_stats (9) - Update sched_domain's statistics for load balancing.
update_sd_pick_busiest (9) - return 1 on busiest group
update_sg_lb_stats (9) - Update sched_group's statistics for load balancing.
updwtmp (3) - append an entry to the wtmp file
updwtmpx (3) - append an entry to the wtmp file
upper_32_bits (9) - return bits 32-63 of a number
uptime (1) - Tell how long the system has been running.
usb_anchor_resume_wakeups (9) - (unknown subject)
usb_anchor_suspend_wakeups (9) - (unknown subject)
usb_composite_setup_continue (9) - Continue with the control transfer
usb_fill_int_urb (9) - macro to help initialize a interrupt urb
usb_interrupt_msg (9) - Builds an interrupt urb, sends it off and waits for c...
usb_sg_init (9) - initializes scatterlist-based bulk/interrupt I/O request
useradd (8) - create a new user or update default new user information
vcstime (8) - Show time in upper right hand corner of the console sc...
vfs_path_lookup (9) - lookup a file path relative to a dentry-vfsmount pair
vgcfgbackup (8) - backup volume group descriptor area
vgcfgrestore (8) - restore volume group descriptor area
vgck (8) - check volume group metadata
vgconvert (8) - convert volume group metadata format
vgdisplay (8) - display attributes of volume groups
vgexport (8) - make volume groups unknown to the system
vgimport (8) - make exported volume groups known to the system
vgimportclone (8) - import and rename duplicated volume group (e.g. a hard...
vgmerge (8) - merge two volume groups
vgmknodes (8) - recreate volume group directory and logical volume spe...
vgs (8) - report information about volume groups
vgscan (8) - scan all disks for volume groups and rebuild caches
vgsplit (8) - split a volume group into two
vhangup (2) - virtually hangup the current terminal
vigr (8) - edit the password, group, shadow-password or shadow-gr...
vipw (8) - edit the password, group, shadow-password or shadow-gr...
vm_unmap_ram (9) - unmap linear kernel address space set up by vm_map_ram
wait_event_interruptible (9) - sleep until a condition gets true
wait_event_interruptible_exclusive_lo... (9) - sleep exclusively until a cond...
wait_event_interruptible_exclusive_lo... (9) - sleep until a condition gets true
wait_event_interruptible_hrtimeout (9) - sleep until a condition gets true or...
wait_event_interruptible_lock_irq (9) - sleep until a condition gets true. Th...
wait_event_interruptible_lock_irq_cmd (9) - sleep until a condition gets true...
wait_event_interruptible_lock_irq_tim... (9) - sleep until a condition gets t...
wait_event_interruptible_locked (9) - sleep until a condition gets true
wait_event_interruptible_locked_irq (9) - sleep until a condition gets true
wait_event_interruptible_timeout (9) - sleep until a condition gets true or a...
WaitForDoorbellInt (9) - Wait for IOC to set its doorbell interrupt bit
wake_up_atomic_t (9) - Wake up a waiter on a atomic_t
wake_up_bit (9) - wake up a waiter on a bit
wake_up_process (9) - Wake up a specific process
wakeup_readers (9) - wake up readers waiting on a channel
walldns-conf (8) - sets up a DNS wall service.
watchgnupg (1) - Read and print logs from a socket
wcsdup (3) - duplicate a wide-character string
wngroups (7WN) - discussion of WordNet search code to group similar ver...
writeback_inodes_sb (9) - writeback dirty inodes from given super_block
writeback_inodes_sb_nr (9) - writeback dirty inodes from given super_block
X509_NAME_entry_count (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_entry (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_index_by_NID (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_index_by_OBJ (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_text_by_NID (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_text_by_OBJ (3ssl) - X509_NAME lookup and enumeration functions
x86_64-linux-gnu-elfedit (1) - Update the ELF header of ELF files.
xprt_lookup_rqst (9) - find an RPC request corresponding to an XID
yield_to (9) - yield the current processor to another thread in your ...
z8530_interrupt (9) - Handle an interrupt from a Z8530
|
