__starget_for_each_device (9) - helper to walk all devices of a target (UNLOC...
add_timer (9)        - start a timer
add_timer_on (9)     - start a timer on a particular CPU
adjust_resource (9)  - modify a resource's start and size
ata_host_activate (9) - start host, request IRQ and register it
ata_host_start (9)   - start and freeze ports of an ATA host
ata_sas_port_start (9) - Set port up for dma.
ata_sas_port_stop (9) - Undo ata_sas_port_start
ata_scsi_start_stop_xlat (9) - Translate SCSI START STOP UNIT command
audit_log_start (9)  - obtain an audit buffer
bdev_read_page (9)   - Start reading a page from a block device
bdev_write_page (9)  - Start writing a page to a block device
bdflush (2)          - start, flush, or tune buffer-dirty-flush daemon
BEGIN (7)            - start a transaction block
blk_delay_queue (9)  - restart queueing after defined interval
blk_queue_bypass_start (9) - enter queue bypass mode
blk_queue_start_tag (9) - find a free tag and assign it
blk_start_plug (9)   - initialize blk_plug and track it inside the task_struct
blk_start_queue (9)  - restart a previously stopped queue
blk_start_queue_async (9) - asynchronously restart a previously stopped queue
blk_start_request (9) - start request processing on the driver
BN_CTX_start (3ssl)  - use temporary BIGNUM variables
call_usermodehelper (9) - prepare and start a usermode application
call_usermodehelper_exec (9) - start a usermode application
ccw_device_start (9) - start a s390 channel program
ccw_device_start_key (9) - start a s390 channel program with key
ccw_device_start_timeout (9) - start a s390 channel program with timeout
ccw_device_start_timeout_key (9) - start a s390 channel program with timeout ...
ccw_device_tm_start (9) - perform start function
ccw_device_tm_start_key (9) - perform start function
ccw_device_tm_start_timeout (9) - perform start function
ccw_device_tm_start_timeout_key (9) - perform start function
cfg80211_ready_on_channel (9) - notification of remain_on_channel start
corosync-pload (8)   - Start payload test.
dbus-launch (1)      - Utility to start a message bus from a shell script
dbus-run-session (1) - start a process as a new D-Bus session
debugfs_use_file_start (9) - mark the beginning of file data access
dpm_resume_start (9) - Execute “noirq” and “early” device callbacks.
dpm_suspend_start (9) - Prepare devices for PM transition and suspend them.
fail2ban-server (1)  - start the server
fcgistarter (8)      - Start a FastCGI program
genphy_config_aneg (9) - restart auto-negotiation or write BMCR
genphy_restart_aneg (9) - Enable and Restart Autonegotiation
get_pfn_range_for_nid (9) - Return the start and end page frames for a node
gnet_stats_start_copy (9) - start dumping procedure in compatibility mode
gnet_stats_start_copy_compat (9) - start dumping procedure in compatibility mode
hrtimer_start (9)    - (re)start an hrtimer on the current CPU
hrtimer_start_range_ns (9) - (re)start an hrtimer on the current CPU
hsi_start_tx (9)     - Signal the port that the client wants to start a TX
ida_get_new_above (9) - allocate new ID above or equal to a start id
ieee80211_start_tx_ba_cb_irqsafe (9) - low level driver ready to aggregate.
ieee80211_start_tx_ba_session (9) - Start a tx Block Ack session.
iscsi_unblock_session (9) - set a session as logged in and start IO.
iscsistart (8)       - iSCSI boot tool
jbd2__journal_restart (9) - restart a handle .
jbd2__journal_start (9) - Obtain a new handle.
jbd2_journal_skip_recovery (9) - Start journal and wipe exiting records
jbd2_journal_start_reserved (9) - start reserved handle
KickStart (9)        - Perform hard reset of MPT adapter.
lookup_resource (9)  - find an existing resource by a resource start address
lxc-attach (1)       - start a process inside a running container.
lxc-autostart (1)    - start/stop/kill auto-started containers
lxc-start (1)        - run an application inside a container.
lxc-start-ephemeral (1) - start an ephemeral copy of an existing container
MakeIocReady (9)     - Get IOC to a READY state, using KickStart if needed.
Mason::Manual::Intro (3pm) - Getting started with Mason
ModPerl::RegistryLoader (3pm) - Compile ModPerl::RegistryCooker scripts at se...
Moose::Cookbook::Roles::Restartable_A... (3pm) - Advanced Role Composition - ...
mpage_readpages (9)  - populate an address space with some pages & start read...
mptscsih_qcmd (9)    - Primary Fusion MPT SCSI initiator IO start routine.
mysqld_safe (1)      - MySQL server startup script
net-server (1p)      - Base Net::Server starting module
netif_start_queue (9) - allow transmit
netif_start_subqueue (9) - allow sending packets on subqueue
netif_wake_queue (9) - restart transmit
open (1)             - start a program on a new virtual terminal (VT).
openvt (1)           - start a program on a new virtual terminal (VT).
pam_open_session (3) - start PAM session management
pam_sm_open_session (3) - PAM service function to start session management
pam_start (3)        - initialization of PAM transaction
pci_bus_add_device (9) - start driver for a single device
pci_bus_add_devices (9) - start driver for PCI devices
perlrequick (1)      - Perl regular expressions quick start
pg_ctl (1)           - initialize, start, stop, or control a PostgreSQL server
pg_ctlcluster (1)    - start/stop/restart/reload a PostgreSQL cluster
phy_start (9)        - start or restart a PHY device
phy_start_aneg (9)   - start auto-negotiation for this PHY device
phy_start_interrupts (9) - request and enable interrupts for a PHY device
phy_start_machine (9) - start PHY state machine tracking
pnp_start_dev (9)    - low-level start of the PnP device
Pod::Simple::PullParserStartToken (3perl) - - start-tokens from Pod::Simple::...
pure-ftpd-wrapper (8) - configures and starts Pure-FTPd daemon
pwm_enable (9)       - start a PWM output toggling
read_abs_bbt (9)     - [GENERIC] Read the bad block table starting at a given...
read_abs_bbts (9)    - [GENERIC] Read the bad block table(s) for all chips st...
read_bbt (9)         - [GENERIC] Read the bad block table starting from page
read_cache_pages (9) - populate an address space with some pages & start read...
relay_file_read_start_pos (9) - find the first available byte to read
restart_syscall (2)  - restart a system call after interruption by a stop signal
rio_disc_mport (9)   - Start discovery through a master port
rio_enum_mport (9)   - Start enumeration through a master port
sb_start_pagefault (9) - get write access to a superblock from a page fault
sb_start_write (9)   - get write access to a superblock
scsi_device_resume (9) - Restart user issued commands to a quiesced device.
seq_hlist_start (9)  - start an iteration of a hlist
seq_hlist_start_head (9) - start an iteration of a hlist
seq_hlist_start_head_rcu (9) - start an iteration of a hlist protected by RCU
seq_hlist_start_percpu (9) - start an iteration of a percpu hlist array
seq_hlist_start_rcu (9) - start an iteration of a hlist protected by RCU
skb_pull (9)         - remove data from the start of a buffer
skb_push (9)         - add data to the start of a buffer
SPI_start_transaction (3) - start a new transaction
splice_from_pipe_begin (9) - start splicing from pipe
srp_start_tl_fail_timers (9) - start the transport layer failure timers
starget_for_each_device (9) - helper to walk all devices of a target
start-stop-daemon (8) - start and stop system daemon programs
START_TRANSACTION (7) - start a transaction block
startpar (8)         - start runlevel scripts in parallel
startpar-upstart-inject (8) - notify startpar of started/stopped upstart jobs
supervise (8)        - starts and monitors a service.
svscan (8)           - starts and monitors a collection of services
svscanboot (8)       - starts svscan (8) in the /service directory, with outp...
swapoff (2)          - start/stop swapping to file/device
swapon (2)           - start/stop swapping to file/device
sys_restart_syscall (9) - restart a system call
systemd-notify (1)   - Notify service manager about start-up completion and o...
trace_workqueue_execute_start (9) - called immediately before the workqueue c...
truncate_inode_pages_range (9) - truncate range of pages specified by start &...
try_to_writeback_inodes_sb (9) - try to start writeback if none underway
try_to_writeback_inodes_sb_nr (9) - try to start writeback if none underway
unicode_start (1)    - put keyboard and console in unicode mode
usb_bus_start_enum (9) - start immediate enumeration (for OTG)
va_start (3)         - variable argument lists
wiphy_rfkill_start_polling (9) - start polling rfkill
xdr_stream_pos (9)   - Return the current offset from the start of the xdr_st...