| rat(3) - phpMan
BIO_reset (3ssl) - BIO control operations
Config (3perl) - access Perl configuration information
__shost_for_each_device (9) - iterate over all devices of a host (UNLOCKED)
a2disconf (8) - enable or disable an apache2 configuration file
a2enconf (8) - enable or disable an apache2 configuration file
a2query (1) - retrieve runtime configuration from a local Apache 2 H...
acpid (8) - Advanced Configuration and Power Interface event daemon
adduser.conf (5) - configuration file for adduser(8) and addgroup(8) .
aio_error (3) - get error status of asynchronous I/O operation
aio_return (3) - get return status of asynchronous I/O operation
aio_suspend (3) - wait for asynchronous I/O operation or timeout
ALTER_OPERATOR (7) - change the definition of an operator
ALTER_OPERATOR_CLASS (7) - change the definition of an operator class
ALTER_OPERATOR_FAMILY (7) - change the definition of an operator family
ALTER_SEQUENCE (7) - change the definition of a sequence generator
ALTER_SYSTEM (7) - change a server configuration parameter
ALTER_TEXT_SEARCH_CONFIGURATION (7) - change the definition of a text search ...
altermime (1) - MIME encoded email pack alteration tool
anvil (8postfix) - Postfix session count and request rate control
Apache2::Directive (3pm) - Perl API for manipulating the Apache configuration...
Apache2::PerlSections (3pm) - write Apache configuration files in Perl
Apache::TestConfig (3pm) - - Test Configuration setup module
Apache::TestReport (3pm) - A parent class for generating bug/success reports
Apache::TestTrace (3pm) - Helper output generation functions
apt-config (8) - APT Configuration Query program
apt-ftparchive (1) - Utility to generate index files
apt.conf (5) - Configuration file for APT
AptPkg::Config (3pm) - APT configuration interface
ASN1_generate_nconf (3ssl) - ASN1 generation functions
ASN1_generate_v3 (3ssl) - ASN1 generation functions
ata_dev_next (9) - device iteration helper
ata_finalize_port_ops (9) - finalize ata_port_operations
ata_gen_ata_sense (9) - generate a SCSI fixed sense block
ata_link_next (9) - link iteration helper
ata_port_detach (9) - Detach ATA port in preparation of device removal
ata_timing_cycle2mode (9) - find xfer mode for the specified cycle duration
autoconf (1) - Generate configuration scripts
autom4te (1) - Generate files and scripts thanks to M4
autoreconf (1) - Update generated configuration files
autoscan (1) - Generate a preliminary configure.in
B::Xref (3perl) - Generates cross reference reports for Perl programs
balance_dirty_pages_ratelimited (9) - balance dirty memory state
bigrat (3perl) - Transparent BigNumber/BigRational support for Perl
BIO_callback_ctrl (3ssl) - BIO control operations
BIO_ctrl (3ssl) - BIO control operations
BIO_ctrl_pending (3ssl) - BIO control operations
BIO_ctrl_wpending (3ssl) - BIO control operations
BIO_eof (3ssl) - BIO control operations
BIO_flush (3ssl) - BIO control operations
BIO_get_close (3ssl) - BIO control operations
BIO_get_info_callback (3ssl) - BIO control operations
BIO_int_ctrl (3ssl) - BIO control operations
BIO_pending (3ssl) - BIO control operations
BIO_ptr_ctrl (3ssl) - BIO control operations
BIO_seek (3ssl) - BIO control operations
BIO_set_close (3ssl) - BIO control operations
BIO_set_info_callback (3ssl) - BIO control operations
BIO_tell (3ssl) - BIO control operations
BIO_wpending (3ssl) - BIO control operations
Bit::Vector::Overload (3pm) - Overloaded operators add-on for Bit::Vector
blk_add_trace_bio_remap (9) - Add a trace for a bio-remap operation
blk_add_trace_rq_remap (9) - Add a trace for a request-remap operation
blk_queue_end_tag (9) - end tag operations for a request
blkdev_issue_write_same (9) - queue a write same operation
BN_add (3ssl) - arithmetic operations on BIGNUMs
BN_clear_bit (3ssl) - bit operations on BIGNUMs
BN_div (3ssl) - arithmetic operations on BIGNUMs
BN_exp (3ssl) - arithmetic operations on BIGNUMs
BN_gcd (3ssl) - arithmetic operations on BIGNUMs
BN_generate_prime (3ssl) - generate primes and test for primality
BN_get_word (3ssl) - BIGNUM assignment operations
BN_is_bit_set (3ssl) - bit operations on BIGNUMs
BN_is_prime (3ssl) - generate primes and test for primality
BN_is_prime_fasttest (3ssl) - generate primes and test for primality
BN_lshift (3ssl) - bit operations on BIGNUMs
BN_lshift1 (3ssl) - bit operations on BIGNUMs
BN_mask_bits (3ssl) - bit operations on BIGNUMs
BN_mod (3ssl) - arithmetic operations on BIGNUMs
BN_mod_add (3ssl) - arithmetic operations on BIGNUMs
BN_mod_exp (3ssl) - arithmetic operations on BIGNUMs
BN_mod_mul (3ssl) - arithmetic operations on BIGNUMs
BN_mod_sqr (3ssl) - arithmetic operations on BIGNUMs
BN_mod_sub (3ssl) - arithmetic operations on BIGNUMs
BN_mul (3ssl) - arithmetic operations on BIGNUMs
BN_nnmod (3ssl) - arithmetic operations on BIGNUMs
BN_one (3ssl) - BIGNUM assignment operations
BN_pseudo_rand (3ssl) - generate pseudo-random number
BN_rand (3ssl) - generate pseudo-random number
BN_rshift (3ssl) - bit operations on BIGNUMs
BN_rshift1 (3ssl) - bit operations on BIGNUMs
BN_set_bit (3ssl) - bit operations on BIGNUMs
BN_set_word (3ssl) - BIGNUM assignment operations
BN_sqr (3ssl) - arithmetic operations on BIGNUMs
BN_sub (3ssl) - arithmetic operations on BIGNUMs
BN_value_one (3ssl) - BIGNUM assignment operations
BN_zero (3ssl) - BIGNUM assignment operations
bootchart.conf (5) - Boot performance analysis graphing tool configuration ...
brctl (8) - ethernet bridge administration
bstring (3) - byte string operations
bus_find_device (9) - device iterator for locating a particular device.
bus_find_device_by_name (9) - device iterator for locating a particular devic...
bus_for_each_dev (9) - device iterator.
bus_for_each_drv (9) - driver iterator
Business::CreditCard (3pm) - Validate/generate credit card checksums/names
bytes (3perl) - Perl pragma to force byte semantics rather than charac...
c2ph (1) - Dump C structures as generated from "cc - g - S" stabs
cacademo (1) - libcaca's demonstration applications
cacafire (1) - libcaca's demonstration applications
capability.conf (5) - configuration file for the pam_cap module
ccw_device_is_multipath (9) - determine if device is operating in multipath mode
cfg80211_remain_on_channel_expired (9) - remain_on_channel duration expired
cfgetispeed (3) - get and set terminal attributes, line control, get and...
cfgetospeed (3) - get and set terminal attributes, line control, get and...
cfmakeraw (3) - get and set terminal attributes, line control, get and...
cfsetispeed (3) - get and set terminal attributes, line control, get and...
cfsetospeed (3) - get and set terminal attributes, line control, get and...
cfsetspeed (3) - get and set terminal attributes, line control, get and...
cgconfig.conf (5) - libcgroup configuration file
cgred.conf (5) - libcgroup configuration file
cgrules.conf (5) - libcgroup configuration file
cgsnapshot (1) - generate the configuration file for given controllers
clamav-milter.conf (5) - Configuration file for clamav-milter
clamconf (1) - Clam AntiVirus configuration utility
clamd.conf (5) - Configuration file for Clam AntiVirus Daemon
Class::Accessor (3pm) - Automated accessor generation
Class::MOP::Method::Generated (3pm) - Abstract base class for generated methods
Class::XSAccessor (3pm) - Generate fast XS accessors without runtime compilation
Class::XSAccessor::Array (3pm) - Generate fast XS accessors without runtime c...
class_dev_iter_exit (9) - finish iteration
class_dev_iter_init (9) - initialize class device iterator
class_dev_iter_next (9) - iterate to the next device
class_find_device (9) - device iterator for locating a particular device
class_for_each_device (9) - device iterator
clk_get_rate (9) - obtain the current clock rate (in Hz) for a clock sour...
clk_round_rate (9) - adjust a rate to the exact rate a clock can provide
clk_set_max_rate (9) - set a maximum clock rate for a clock source
clk_set_min_rate (9) - set a minimum clock rate for a clock source
clk_set_rate (9) - set the clock rate for a clock source
clk_set_rate_range (9) - set a rate range for a clock source
clk_unprepare (9) - undo preparation of a clock source
CONF_modules_finish (3ssl) - OpenSSL configuration cleanup functions
CONF_modules_free (3ssl) - OpenSSL configuration cleanup functions
CONF_modules_load (3ssl) - OpenSSL configuration functions
CONF_modules_load_file (3ssl) - OpenSSL configuration functions
CONF_modules_unload (3ssl) - OpenSSL configuration cleanup functions
confdb_keys (8) - Overview of keys stored in the Configuration Database
config (5ssl) - OpenSSL CONF library configuration files
config.sub (1) - validate and canonicalize a configuration triplet
config_data (1) - Query or change configuration of Perl modules
confmodule (3) - communicate with Debian configuration system FrontEnd.
confstr (3) - get configuration dependent string variables
console-setup (5) - configuration file for setupcon
corosync-cfgtool (8) - An administrative tool for corosync.
corosync-keygen (8) - Generate an authentication key for Corosync.
corosync.conf (5) - corosync executive configuration file
CPAN::HandleConfig (3perl) - internal configuration handling for CPAN.pm
CREATE_OPERATOR (7) - define a new operator
CREATE_OPERATOR_CLASS (7) - define a new operator class
CREATE_OPERATOR_FAMILY (7) - define a new operator family
CREATE_SEQUENCE (7) - define a new sequence generator
CREATE_TEXT_SEARCH_CONFIGURATION (7) - define a new text search configuration
crypto_akcipher_decrypt (9) - Invoke public key decrypt operation
crypto_akcipher_encrypt (9) - Invoke public key encrypt operation
crypto_akcipher_set_priv_key (9) - Invoke set private key operation
crypto_akcipher_set_pub_key (9) - Invoke set public key operation
crypto_akcipher_sign (9) - Invoke public key sign operation
crypto_akcipher_verify (9) - Invoke public key verify operation
crypto_rng_generate (9) - get random number
crypto_shash_descsize (9) - obtain the operational state size
crypto_shash_export (9) - extract operational state for message digest
crypto_shash_import (9) - import operational state
ctags (1) - generate tag file for Emacs, vi
ctags.emacs23 (1) - generate tag file for Emacs, vi
ctags.emacs24 (1) - generate tag file for Emacs, vi
danted.conf (5) - Dante server configuration file syntax
Date::Calc::Object (3pm) - Object-oriented add-on for Date::Calc with overloa...
DateTime::Duration (3pm) - Duration objects for date math
db5.3_codegen (1) - generate application code for Berkeley DB
dbconfig-generate-include (1) - generate custom format db include files
DBI::DBD::Metadata (3pm) - Generate the code and data for some DBI metadata m...
dbus-uuidgen (1) - Utility to generate UUIDs
ddns-confgen (8) - ddns key generation tool
debconf (7) - Debian package configuration system
debconf.conf (5) - debconf configuration file
deluser.conf (5) - configuration file for deluser(8) and delgroup(8) .
depmod (8) - Generate modules.dep and map files.
depmod.d (5) - Configuration directory for depmod
Devel::SelfStubber (3perl) - generate stubs for a SelfLoading module
device_find_child (9) - device iterator for locating a particular device.
device_for_each_child (9) - device child iterator.
device_for_each_child_reverse (9) - device child iterator in reversed order.
devm_snd_dmaengine_pcm_register (9) - resource managed dmaengine PCM registra...
devm_snd_soc_register_card (9) - resource managed card registration
devm_snd_soc_register_component (9) - resource managed component registration
devm_snd_soc_register_platform (9) - resource managed platform registration
devres_for_each_res (9) - Resource iterator
DH_check (3ssl) - generate and check Diffie-Hellman parameters
dh_gencontrol (1) - generate and install control file
DH_generate_key (3ssl) - perform Diffie-Hellman key exchange
DH_generate_parameters (3ssl) - generate and check Diffie-Hellman parameters
dh_md5sums (1) - generate DEBIAN/md5sums file
dh_prep (1) - perform cleanups in preparation for building a binary ...
dh_suidregister (1) - suid registration program (deprecated)
dh_ucf (1) - register configuration files with ucf
dh_usrlocal (1) - migrate usr/local directories to maintainer scripts
dhclient (8) - Dynamic Host Configuration Protocol Client
dhclient-script (8) - DHCP client network configuration script
dhclient.conf (5) - DHCP client configuration file
dhcp-options (5) - Dynamic Host Configuration Protocol options
dhparam (1ssl) - DH parameter manipulation and generation
dir_colors (5) - configuration file for dircolors(1)
disk_part_iter_exit (9) - finish up partition iteration
disk_part_iter_init (9) - initialize partition iterator
disk_part_iter_next (9) - proceed iterator to the next partition and return it
dl_iterate_phdr (3) - walk through list of shared objects
dma_buf_begin_cpu_access (9) - Must be called before accessing a dma_buf from...
dnssec-dsfromkey (8) - DNSSEC DS RR generation tool
dnssec-keyfromlabel (8) - DNSSEC key generation tool
dnssec-keygen (8) - DNSSEC key generation tool
doveadm (1) - Dovecot's administration utility
doveadm-config (1) - Dovecot's configuration dumping utility
doveadm-pw (1) - Dovecot's password hash generator
doveadm-reload (1) - Dovecot's administration utility
doveadm-stop (1) - Dovecot's administration utility
doveconf (1) - Dovecot's configuration dumping utility
dpkg-genchanges (1) - generate Debian .changes files
dpkg-gencontrol (1) - generate Debian control files
dpkg-gensymbols (1) - generate symbols files (shared library dependency info...
dpkg-shlibdeps (1) - generate shared library substvar dependencies
dpkg.cfg (5) - dpkg configuration file
Dpkg::Checksums (3) - generate and manipulate file checksums
Dpkg::Conf (3) - parse dpkg configuration files
dpm_for_each_dev (9) - device iterator.
drand48 (3) - generate uniformly distributed pseudo-random numbers
drand48_r (3) - generate uniformly distributed pseudo-random numbers r...
driver_find_device (9) - device iterator for locating a particular device.
driver_for_each_device (9) - Iterator for devices bound to a driver.
DROP_OPERATOR (7) - remove an operator
DROP_OPERATOR_CLASS (7) - remove an operator class
DROP_OPERATOR_FAMILY (7) - remove an operator family
DROP_TEXT_SEARCH_CONFIGURATION (7) - remove a text search configuration
DSA_do_sign (3ssl) - raw DSA signature operations
DSA_do_verify (3ssl) - raw DSA signature operations
DSA_generate_key (3ssl) - generate DSA key pair
DSA_generate_parameters (3ssl) - generate DSA parameters
dsaparam (1ssl) - DSA parameter manipulation and generation
e2fsck.conf (5) - Configuration file for e2fsck
ecparam (1ssl) - EC parameter manipulation and generation
enc2xs (1) - - Perl Encode Module Generator
enum_ieee80211_conf_flags (9) - configuration flags
enum_ieee80211_rate_control_changed (9) - flags to indicate what changed
enum_ieee80211_rate_flags (9) - rate flags
enum_mac80211_rate_control_flags (9) - per-rate flags set by the Rate Control...
enum_rate_info_flags (9) - bitrate info flags
enum_w1_commands (9) - commands available for master or slave operations
erand48 (3) - generate uniformly distributed pseudo-random numbers
erand48_r (3) - generate uniformly distributed pseudo-random numbers r...
etags (1) - generate tag file for Emacs, vi
etags.emacs23 (1) - generate tag file for Emacs, vi
etags.emacs24 (1) - generate tag file for Emacs, vi
eth_hw_addr_random (9) - Generate software assigned random Ethernet and set d...
eth_random_addr (9) - Generate software assigned random Ethernet address
EVP_PKEVP_PKEY_CTX_set_app_data (3ssl) - key and parameter generation functions
EVP_PKEY_ctrl (3ssl) - algorithm specific control operations
EVP_PKEY_ctrl_str (3ssl) - algorithm specific control operations
EVP_PKEY_CTX_ctrl (3ssl) - algorithm specific control operations
EVP_PKEY_CTX_get_app_data (3ssl) - key and parameter generation functions
EVP_PKEY_CTX_get_cb (3ssl) - key and parameter generation functions
EVP_PKEY_CTX_get_keygen_info (3ssl) - key and parameter generation functions
EVP_PKEY_CTX_set_cb (3ssl) - key and parameter generation functions
EVP_PKEY_keygen (3ssl) - key and parameter generation functions
EVP_PKEY_keygen_init (3ssl) - key and parameter generation functions
EVP_PKEY_paramgen (3ssl) - key and parameter generation functions
EVP_PKEY_paramgen_init (3ssl) - key and parameter generation functions
expiry (1) - check and enforce password expiration policy
ExtUtils::Constant (3perl) - generate XS code to import C header constants
ExtUtils::Constant::XS (3perl) - generate C code for XS modules' constants.
File::Spec (3perl) - portably perform operations on file names
File::Spec::Functions (3perl) - portably perform operations on file names
filetest (3perl) - Perl pragma to control the filetest permission operators
fonts-conf (5) - Font configuration files
fop-ttfreader (1) - - A tool which reads TTF files and generates XML font ...
for_each_dtlb_entry (9) - Iterate over free (non-wired) DTLB entries
for_each_itlb_entry (9) - Iterate over free (non-wired) ITLB entries
fpathconf (3) - get configuration values for files
freshclam.conf (5) - Configuration file for Clam AntiVirus database update ...
fsl_local_config_read (9) - Generate a MPC85xx local config space read
fsl_local_config_write (9) - Generate a MPC85xx local config space write
fsl_rio_config_read (9) - Generate a MPC85xx read maintenance transaction
fsl_rio_config_write (9) - Generate a MPC85xx write maintenance transaction
gai.conf (5) - getaddrinfo(3) configuration file
gen_kill_estimator (9) - remove a rate estimator
gen_new_estimator (9) - create a new rate estimator
gen_replace_estimator (9) - replace rate estimator configuration
gencat (1) - Generate message catalog
gendiff (1) - utility to aid in error-free diff file generation
gendsa (1ssl) - generate a DSA private key from a set of parameters
genpkey (1ssl) - generate a private key
genrandom (8) - generate a file containing random data
genrsa (1ssl) - generate an RSA private key
getconf (1) - Query system configuration variables
git-pull (1) - Fetch from and integrate with another repository or a ...
git-request-pull (1) - Generates a summary of pending changes
gitcvs-migration (7) - Git for CVS users
gitweb.conf (5) - Gitweb (Git web interface) configuration file
gnet_stats_copy_rate_est (9) - copy rate estimator statistics into statistics...
GnuPG::UserAttribute (3pm) - GnuPG User Attribute Objects
gradm2 (8) - Administration program for the grsecurity RBAC system
group.conf (5) - configuration file for the pam_group module
grub-glue-efi (1) - generate a fat binary for EFI
grub-kbdcomp (1) - generate a GRUB keyboard layout file
grub-mkconfig (8) - generate a GRUB configuration file
grub-mklayout (1) - generate a GRUB keyboard layout file
grub-mkpasswd-pbkdf2 (1) - generate hashed password for GRUB
grub-render-label (1) - generate a .disk_label for Apple Macs.
gtk-query-immodules-2.0 (1) - Input method module registration utility
hddtemp (8) - Utility to monitor hard drive temperature
hdparm.conf (5) - Debian configuration file for hdparm
helpztags (1) - generate the help tags file for directory
hgrc (5) - configuration files for Mercurial
hlist_for_each_entry (9) - iterate over list of given type
hlist_for_each_entry_continue (9) - iterate over a hlist continuing after cur...
hlist_for_each_entry_from (9) - iterate over a hlist continuing from current ...
hlist_for_each_entry_safe (9) - iterate over list of given type safe against ...
host.conf (5) - resolver configuration file
hostname (5) - Local hostname configuration file
HTML::Mason::Admin (3pm) - Mason Administrator's Manual
HTML::Mason::Compiler::ToObject (3pm) - A Compiler subclass that generates Ma...
HTML::Mason::Lexer (3pm) - Generates events based on component source lexing
HTML::Mason::Params (3pm) - Mason configuration parameters
HTTP::Config (3pm) - Configuration for request and response objects
httxt2dbm (1) - Generate dbm files for use with RewriteMap
i2c_smbus_xfer (9) - execute SMBus protocol operations
iconvconfig (8) - create iconv module configuration cache
idr_for_each (9) - iterate through all stored pointers
ieee80211_beacon_get (9) - beacon generation function
ieee80211_ctstoself_duration (9) - Get the duration field for a CTS-to-self f...
ieee80211_ctstoself_get (9) - CTS-to-self frame generation function
ieee80211_generic_frame_duration (9) - Calculate the duration field for a frame
ieee80211_get_response_rate (9) - get basic rate for a given rate
ieee80211_iterate_active_interfaces (9) - iterate active interfaces
ieee80211_iterate_active_interfaces_a... (9) - iterate active interfaces
ieee80211_rts_duration (9) - Get the duration field for an RTS frame
ieee80211_rts_get (9) - RTS frame generation function
ifquery (8) - parse interface configuration
incm (1) - Incorporating new mails for Mew
initramfs.conf (5) - configuration file for mkinitramfs
initstate (3) - random number generator
initstate_r (3) - reentrant random number generator
input_handler_for_each_handle (9) - handle iterator
input_set_events_per_packet (9) - tell handlers about the driver event rate
interfaces (5) - network interface configuration for ifup and ifdown
intro (8) - introduction to administration and privileged commands
IO::Tty::Constant (3pm) - Terminal Constants (autogenerated)
io_cancel (2) - cancel an outstanding asynchronous I/O operation
ip-l2tp (8) - L2TPv3 static unmanaged tunnel configuration
ip-link (8) - network device configuration
ip-netconf (8) - network configuration monitoring
ip-ntable (8) - neighbour table configuration
ip-tunnel (8) - tunnel configuration
ip-xfrm (8) - transform configuration
ip6tables (8) - administration tool for IPv4/IPv6 packet filtering and...
iptables (8) - administration tool for IPv4/IPv6 packet filtering and...
is_context_customizable (3) - check whether SELinux context type is customiza...
isc-hmac-fixup (8) - fixes HMAC keys generated by older versions of BIND
iscsi-iname (8) - iSCSI initiator name generation tool
iscsiadm (8) - open-iscsi administration utility
iterate_supers_type (9) - call function for superblocks of given type
jail.conf (10) - configuration for the fail2ban server
journald.conf (5) - Journal service configuration file
jrand48 (3) - generate uniformly distributed pseudo-random numbers
jrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
kbdrate (8) - reset the keyboard repeat rate and delay time
kernel-pkg.conf (5) - configuration file for make-kpkg
keyboard (5) - keyboard configuration file
kfifo_dma_in_finish (9) - finish a DMA IN operation
kfifo_dma_out_finish (9) - finish a DMA OUT operation
kmsg_dump_rewind (9) - reset the interator
kobject_get_path (9) - generate and return the path associated with a given k...
lcong48 (3) - generate uniformly distributed pseudo-random numbers
lcong48_r (3) - generate uniformly distributed pseudo-random numbers r...
ldap.conf (5) - LDAP configuration file/environment variables
ldap_table (5) - Postfix LDAP client configuration
ldapexop (1) - issue LDAP extended operations
libao.conf (5) - configuration for libao.
libaudit.conf (5) - libaudit configuration file
lighttpd-disable-mod (1) - enable or disable configuration in lighttpd server
lighttpd-enable-mod (1) - enable or disable configuration in lighttpd server
lighty-disable-mod (1) - enable or disable configuration in lighttpd server
lighty-enable-mod (1) - enable or disable configuration in lighttpd server
limits.conf (5) - configuration file for the pam_limits module
linux-version (1) - operate on Linux kernel version strings
list_for_each (9) - iterate over a list
list_for_each_entry (9) - iterate over list of given type
list_for_each_entry_continue (9) - continue iteration over list of given type
list_for_each_entry_continue_reverse (9) - iterate backwards from the given p...
list_for_each_entry_from (9) - iterate over list of given type from the curre...
list_for_each_entry_reverse (9) - iterate backwards over list of given type.
list_for_each_entry_safe (9) - iterate over list of given type safe against r...
list_for_each_entry_safe_continue (9) - continue list iteration safe against ...
list_for_each_entry_safe_from (9) - iterate over list from current point safe...
list_for_each_entry_safe_reverse (9) - iterate backwards over list safe again...
list_for_each_prev (9) - iterate over a list backwards
list_for_each_prev_safe (9) - iterate over a list backwards safe against remo...
list_for_each_safe (9) - iterate over a list safe against removal of list entry
locale (3perl) - Perl pragma to use or avoid POSIX locales for built-in...
locale-gen (8) - generates localisation files from templates
locale.conf (5) - Configuration file for locale settings
locale.gen (5) - Configuration file for locale-gen
localtime (5) - Local timezone configuration file
login.defs (5) - shadow password suite configuration
logind.conf (5) - Login manager configuration file
lrand48 (3) - generate uniformly distributed pseudo-random numbers
lrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
lvm-dumpconfig (8) - dump LVM configuration
lvm.conf (5) - Configuration file for LVM2
lvmconf (8) - LVM configuration modifier
lxc-config (1) - query LXC system configuration
lxc-usernet (5) - unprivileged user network administration file.
lxc.conf (5) - Configuration files for LXC.
lxc.container.conf (5) - LXC container configuration file
lxc.system.conf (5) - LXC system configuration file
machine-id (5) - Local machine ID configuration file
Mail::Box::Locker::DotLock (3pm) - lock a folder with a separate file
Mail::Box::Locker::NFS (3pm) - lock a folder with a separate file, NFS-safe
Mail::DKIM::Signer (3pm) - generates a DKIM signature for a message
Mail::SpamAssassin::AICache (3pm) - provide access to cached information for ...
Mail::SpamAssassin::ArchiveIterator (3pm) - find and process messages one at ...
Mail::SpamAssassin::Conf (3pm) - SpamAssassin configuration file
Mail::SpamAssassin::Conf::Parser (3pm) - parse SpamAssassin configuration
Mail::SPF::SenderIPAddrMech (3pm) - Abstract base class for SPF record mechan...
mairixrc (5) - configuration file for mairix(1)
master (5) - Postfix master process configuration file format
matchpathcon (3) - get the default SELinux security context for the speci...
matchpathcon_fini (3) - get the default SELinux security context for the spec...
matchpathcon_index (3) - get the default SELinux security context for the spe...
matchpathcon_init (3) - get the default SELinux security context for the spec...
Math::BigRat (3perl) - Arbitrary big rational numbers
mcookie (1) - generate magic cookies for xauth
mdadm.conf (5) - configuration for management of Software RAID with mdadm
memcache_table (5) - Postfix memcache client configuration
Memoize::Expire (3perl) - Plug-in module for automatic expiration of memoized...
Memoize::ExpireFile (3perl) - test for Memoize expiration semantics
Memoize::ExpireTest (3perl) - test for Memoize expiration semantics
memusagestat (1) - generate graphic from memory profiling data
Method::Signatures::Simple (3pm) - Basic method declarations with signatures,...
migrate_pages (2) - move all pages in a process to another set of nodes
mkdirat (2) - create a directory
mke2fs.conf (5) - Configuration file for mke2fs
mkinitramfs (8) - low-level tool for generating an initramfs image
modprobe.d (5) - Configuration directory for modprobe
Module::Build::ConfigData (3perl) - Configuration for Module::Build
Module::Build::Notes (3perl) - Create persistent distribution configuration m...
Moose::Cookbook::Basics::BankAccount_... (3pm) - Demonstrates the use of meth...
Moose::Cookbook::Basics::BinaryTree_A... (3pm) - Demonstrates various attribu...
Moose::Cookbook::Basics::Company_Subt... (3pm) - Demonstrates the use of subt...
Moose::Cookbook::Basics::Genome_Overl... (3pm) - Operator overloading, subtyp...
Moose::Cookbook::Basics::HTTP_Subtype... (3pm) - Demonstrates subtypes and co...
Moose::Meta::TypeConstraint::Enum (3pm) - Type constraint for enumerated values.
mpt_halt_firmware (9) - Halts the firmware if it is operational and panic the...
mptbase_sas_persist_operation (9) - Perform operation on SAS Persistent Table
mrand48 (3) - generate uniformly distributed pseudo-random numbers
mrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
msgctl (2) - System V message control operations
msgop (2) - System V message queue operations
msgrcv (2) - System V message queue operations
msgsnd (2) - System V message queue operations
mt (1) - control magnetic tape drive operation
mt-gnu (1) - control magnetic tape drive operation
muttrc (5) - Configuration file for the Mutt Mail User Agent
muttrc-org (5) - Configuration file for the Mutt Mail User Agent
muttrc-patched (5) - Configuration file for the Mutt Mail User Agent
myisampack (1) - generate compressed, read-only MyISAM tables
mysql_table (5) - Postfix MySQL client configuration
mysqlbug (1) - generate bug report
named-checkconf (8) - named configuration file syntax checking tool
named.conf (5) - configuration file for named
namespace.conf (5) - the namespace configuration file
nand_shutdown (9) - [MTD Interface] Finish the current NAND operation and ...
net (8) - Tool for administration of Samba and remote CIFS servers.
Net::Config (3perl) - Local configuration data for libnet
Net::DBus::Binding::Iterator (3pm) - Reading and writing message parameters
Net::DBus::Test::MockIterator (3pm) - Iterator over a mock message
netif_oper_up (9) - test if device is operational
NOTIFY (7) - generate a notification
notmuch-config (1) - access notmuch configuration file
notmuch-new (1) - incorporate new mail into the notmuch database
nrand48 (3) - generate uniformly distributed pseudo-random numbers
nrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
nsec3hash (8) - generate NSEC3 hash
nss (5) - Name Service Switch configuration file
nsswitch.conf (5) - Name Service Switch configuration file
OPENSSL_config (3ssl) - simple OpenSSL configuration functions
OPENSSL_load_builtin_modules (3ssl) - add standard configuration modules
OPENSSL_no_config (3ssl) - simple OpenSSL configuration functions
operator (7) - C operator precedence and order of evaluation
ops (3perl) - Perl pragma to restrict unsafe operations when compiling
os-release (5) - Operating system identification
overload (3perl) - Package for overloading Perl operations
pam-auth-update (8) - manage PAM configuration using packaged profiles
pam.conf (5) - PAM configuration files
pam.d (5) - PAM configuration files
pam_misc_drop_env (3) - liberating a locally saved environment
paperconf (1) - print paper configuration information
params_rate (9) - Get the sample rate from the hw params
pathconf (3) - get configuration values for files
pci_bus_set_ops (9) - Set raw operations of pci bus
pci_dev_run_wake (9) - Check if device can generate run-time wake-up events.
pci_pme_capable (9) - check the capability of PCI device to generate PME#
pci_save_state (9) - save the PCI configuration space of a device before su...
pcre-config (1) - program to return PCRE configuration
pdfseparate (1) - Portable Document Format (PDF) page extractor
Perl::OSType (3perl) - Map Perl operating system names to generic types
perlapi (1) - autogenerated documentation for the perl public API
perlebcdic (1) - Considerations for running Perl on EBCDIC platforms
perlintern (1) - autogenerated documentation of purely internal Perl fu...
perlnumber (1) - semantics of numbers and numeric operations in Perl
perlop (1) - Perl operators and precedence
perlvos (1) - Perl for Stratus OpenVOS
pg_conftool (1) - read and edit PostgreSQL cluster configuration files
pgrphack (8) - runs a program in a separate process group.
pgsql_table (5) - Postfix PostgreSQL client configuration
php-config (1) - get information about PHP configuration and compile op...
php-config5 (1) - get information about PHP configuration and compile op...
piix_check_450nx_errata (9) - Check for problem 450NX setup
policyd-weight.conf (5) - policyd-weight configuration parameters
policytool (1) - PolicyTool Administration GUI Utility
postconf (1) - Postfix configuration utility
postconf (5) - Postfix configuration parameters
postgresqlrc (5) - Per-user PostgreSQL cluster configuration
prctl (2) - operations on a process
printk_timed_ratelimit (9) - caller-controlled printk ratelimiting
pstruct (1) - Dump C structures as generated from "cc - g - S" stabs
pure-pwconvert (8) - Generate a virtual users file from system accounts
pwm_config (9) - change a PWM device configuration
qmqp-source (1) - multi-threaded QMQP test generator
rand (1ssl) - generate pseudo-random bytes
rand (3) - pseudo-random number generator
rand (3ssl) - pseudo-random number generator
RAND_bytes (3ssl) - generate random data
RAND_pseudo_bytes (3ssl) - generate random data
rand_r (3) - pseudo-random number generator
random (3) - random number generator
random_r (3) - reentrant random number generator
ranlib (1) - generate index to archive.
rate_control_send_low (9) - helper for drivers for management/no-ack frames
rdoc (1) - Generate documentation from Ruby script files
rdoc2.1 (1) - Generate documentation from Ruby script files
register_syscore_ops (9) - Register a set of system core operations.
regulator_get_mode (9) - get regulator operating mode
regulator_list_voltage (9) - enumerate supported voltages
regulator_set_mode (9) - set regulator operating mode
reportbug.conf (5) - The configuration file for reportbug
req (1ssl) - PKCS#10 certificate request and certificate generating...
resolv.conf (5) - resolver configuration file
resolved.conf (5) - Network Name Resolution configuration file
resolver (5) - resolver configuration file
rio_build_route_tables (9) - Generate route tables from switch route entries
rio_clear_locks (9) - Release all host locks and signal enumeration complete
rio_enum_complete (9) - Tests if enumeration of a network is complete
rio_enum_mport (9) - Start enumeration through a master port
rio_enum_peer (9) - Recursively enumerate a RIO network through a master port
rio_local_read_config_16 (9) - Read 16 bits from local configuration space
rio_local_read_config_32 (9) - Read 32 bits from local configuration space
rio_local_read_config_8 (9) - Read 8 bits from local configuration space
rio_local_write_config_16 (9) - Write 16 bits to local configuration space
rio_local_write_config_32 (9) - Write 32 bits to local configuration space
rio_local_write_config_8 (9) - Write 8 bits to local configuration space
RIO_LOP_READ (9) - Generate rio_local_read_config_* functions
RIO_LOP_WRITE (9) - Generate rio_local_write_config_* functions
rio_mport_scan (9) - execute enumeration/discovery on the specified mport
RIO_OP_READ (9) - Generate rio_mport_read_config_* functions
RIO_OP_WRITE (9) - Generate rio_mport_write_config_* functions
rio_read_config_16 (9) - Read 16 bits from configuration space
rio_read_config_32 (9) - Read 32 bits from configuration space
rio_read_config_8 (9) - Read 8 bits from configuration space
rio_register_scan (9) - enumeration/discovery method registration interface
rio_unregister_scan (9) - removes enumeration/discovery method from mport
rio_write_config_16 (9) - Write 16 bits to configuration space
rio_write_config_32 (9) - Write 32 bits to configuration space
rio_write_config_8 (9) - Write 8 bits to configuration space
rndc-confgen (8) - rndc key generation tool
rndc.conf (5) - rndc configuration file
rpc_clnt_iterate_for_each_xprt (9) - Apply a function to all transports
rpmdeps (8) - Generate RPM Package Dependencies
RSA_blinding_off (3ssl) - protect the RSA operation from timing attacks
RSA_blinding_on (3ssl) - protect the RSA operation from timing attacks
RSA_generate_key (3ssl) - generate RSA key pair
RSA_private_encrypt (3ssl) - low level signature operations
RSA_public_decrypt (3ssl) - low level signature operations
rst2man (1) - generate unix manpages from reStructured text
rsyncd.conf (5) - configuration file for rsync in daemon mode
rsyslog.conf (5) - rsyslogd(8) configuration file
samba-tool (8) - Main Samba administration tool.
sata_set_spd_needed (9) - is SATA spd configuration needed
scandirat (3) - scan a directory for matching entries
sd_readahead (3) - Control ongoing disk boot-time read-ahead operations
seed48 (3) - generate uniformly distributed pseudo-random numbers
seed48_r (3) - generate uniformly distributed pseudo-random numbers r...
selinux_binary_policy_path (3) - These functions return the paths to the acti...
selinux_booleans_path (3) - These functions return the paths to the active SE...
selinux_colors_path (3) - Return a path to the active SELinux policy color co...
selinux_contexts_path (3) - These functions return the paths to the active SE...
selinux_current_policy_path (3) - These functions return the paths to the act...
selinux_default_context_path (3) - These functions return the paths to the ac...
selinux_default_type_path (3) - These functions return the paths to the activ...
selinux_failsafe_context_path (3) - These functions return the paths to the a...
selinux_file_context_homedir_path (3) - These functions return the paths to t...
selinux_file_context_local_path (3) - These functions return the paths to the...
selinux_file_context_path (3) - These functions return the paths to the activ...
selinux_homedir_context_path (3) - These functions return the paths to the ac...
selinux_media_context_path (3) - These functions return the paths to the acti...
selinux_netfilter_context_path (3) - These functions return the paths to the ...
selinux_path (3) - These functions return the paths to the active SELinux...
selinux_removable_context_path (3) - These functions return the paths to the ...
selinux_securetty_types_path (3) - These functions return the paths to the ac...
selinux_user_contexts_path (3) - These functions return the paths to the acti...
selinux_usersconf_path (3) - These functions return the paths to the active S...
selinux_x_context_path (3) - These functions return the paths to the active S...
semanage.conf (5) - global configuration file for the SELinux Management l...
semctl (2) - System V semaphore control operations
semop (2) - System V semaphore operations
semtimedop (2) - System V semaphore operations
sepermit.conf (5) - configuration file for the pam_sepermit module
seq_hlist_start (9) - start an iteration of a hlist
seq_hlist_start_head (9) - start an iteration of a hlist
seq_hlist_start_head_rcu (9) - start an iteration of a hlist protected by RCU
seq_hlist_start_percpu (9) - start an iteration of a percpu hlist array
seq_hlist_start_rcu (9) - start an iteration of a hlist protected by RCU
setstate (3) - random number generator
setstate_r (3) - reentrant random number generator
shmat (2) - System V shared memory operations
shmdt (2) - System V shared memory operations
shmop (2) - System V shared memory operations
shost_for_each_device (9) - iterate over all devices of a host
shtool-slo (1) - GNU shtool separate linker options by library class
shtool-subst (1) - GNU shtool sed(1) substitution operations
shtool-table (1) - GNU shtool pretty-print a field-separated list
shuf (1) - generate random permutations
sigaddset (3) - POSIX signal set operations
sigandset (3) - POSIX signal set operations
sigdelset (3) - POSIX signal set operations
sigemptyset (3) - POSIX signal set operations
sigfillset (3) - POSIX signal set operations
sigisemptyset (3) - POSIX signal set operations
sigismember (3) - POSIX signal set operations
sigorset (3) - POSIX signal set operations
sigsetops (3) - POSIX signal set operations
sil_dev_config (9) - Apply device/host-specific errata fixups
sk_for_each_entry_offset_rcu (9) - iterate over a list at a given struct offset
skb_copy_datagram_iter (9) - Copy a datagram to an iovec iterator.
slapd-config (5) - configuration backend to slapd
slapd.access (5) - access configuration for slapd, the stand-alone LDAP d...
slapd.conf (5) - configuration file for slapd, the stand-alone LDAP daemon
slapd.plugin (5) - plugin configuration for slapd, the stand-alone LDAP d...
slaptest (8) - Check the suitability of the OpenLDAP slapd configuration
smartd.conf (5) - SMART Disk Monitoring Daemon Configuration File
smb.conf (5) - The configuration file for the Samba suite
smbgetrc (5) - configuration file for smbget
smtp-source (1) - multi-threaded SMTP/LMTP test generator
snd_ac97_pcm_double_rate_rules (9) - set double rate constraints
snd_ac97_set_rate (9) - change the rate of the given input/output.
snd_card_disconnect (9) - disconnect all APIs from the file-operations (user ...
snd_ctl_enum_info (9) - fills the info structure for an enumerated control
snd_interval_ratnum (9) - refine the interval value
snd_interval_refine (9) - refine the interval value of configurator
snd_pcm_group_for_each_entry (9) - iterate over the linked substreams
snd_pcm_hw_constraint_ratdens (9) - apply ratdens constraint to a parameter
snd_pcm_hw_constraint_ratnums (9) - apply ratnums constraint to a parameter
snd_pcm_limit_hw_rates (9) - determine rate_min/rate_max fields
snd_pcm_rate_bit_to_rate (9) - converts SNDRV_PCM_RATE_xxx bit to sample rate
snd_pcm_rate_mask_intersect (9) - computes the intersection between two rate ...
snd_pcm_rate_range_to_bits (9) - converts rate range to SNDRV_PCM_RATE_xxx bit
snd_pcm_rate_to_rate_bit (9) - converts sample rate to SNDRV_PCM_RATE_xxx bit
snd_pcm_set_ops (9) - set the PCM operators
snd_printd_ratelimit (9) - (unknown subject)
snd_rawmidi_set_ops (9) - set the rawmidi operators
snd_soc_dai_set_bclk_ratio (9) - configure BCLK to sample rate ratio.
snd_soc_dai_set_tdm_slot (9) - Configures a DAI for TDM operation
snd_soc_dapm_get_enum_double (9) - dapm enumerated double mixer get callback
snd_soc_dapm_put_enum_double (9) - dapm enumerated double mixer set callback
snd_soc_get_enum_double (9) - enumerated double mixer get callback
snd_soc_info_enum_double (9) - enumerated double mixer info callback
snd_soc_put_enum_double (9) - enumerated double mixer put callback
spi_setup (9) - setup SPI mode and clock rate
spkac (1ssl) - SPKAC printing and generating utility
sqlite_table (5) - Postfix SQLite configuration
srand (3) - pseudo-random number generator
srand48 (3) - generate uniformly distributed pseudo-random numbers
srand48_r (3) - generate uniformly distributed pseudo-random numbers r...
srandom (3) - random number generator
srandom_r (3) - reentrant random number generator
ssh-keygen (1) - authentication key generation, management and conversion
ssh_config (5) - OpenSSH SSH client configuration files
sshd_config (5) - OpenSSH SSH daemon configuration file
SSL_COMP_add_compression_method (3ssl) - handle SSL/TLS integrated compressio...
SSL_CTX_set_generate_session_id (3ssl) - manipulate generation of SSL session...
SSL_get_error (3ssl) - obtain result code for TLS/SSL I/O operation
SSL_has_matching_session_id (3ssl) - manipulate generation of SSL session IDs...
SSL_rstate_string (3ssl) - get textual description of state of an SSL object ...
SSL_rstate_string_long (3ssl) - get textual description of state of an SSL ob...
SSL_set_generate_session_id (3ssl) - manipulate generation of SSL session IDs...
SSL_want (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_nothing (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_read (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_write (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_x509_lookup (3ssl) - obtain state information TLS/SSL I/O operation
stdbuf (1) - Run COMMAND, with modified buffering operations for it...
string (3) - string operations
struct_cfg80211_ap_settings (9) - AP configuration
struct_cfg80211_ops (9) - backend description for wireless configuration
struct_clk_notifier_data (9) - rate data to pass to the notifier callback
struct_dma_buf_ops (9) - operations possible on struct dma_buf
struct_fence_ops (9) - operations implemented for fence
struct_gnet_estimator (9) - rate estimator configuration
struct_gnet_stats_rate_est (9) - rate estimator
struct_gnet_stats_rate_est64 (9) - rate estimator
struct_hsi_config (9) - Configuration for RX/TX HSI modules
struct_ieee80211_conf (9) - configuration of the device
struct_ieee80211_radiotap_iterator (9) - tracks walk thru present radiotap args
struct_ieee80211_rate (9) - bitrate definition
struct_ieee80211_tx_queue_params (9) - transmit queue configuration
struct_ieee80211_tx_rate (9) - rate selection/status
struct_ieee80211_tx_rate_control (9) - rate control information for/from RC algo
struct_iio_trigger_ops (9) - operations structure for an iio_trigger.
struct_nand_hw_control (9) - Control structure for hardware controller (e.g E...
struct_pwm_ops (9) - PWM controller operations
struct_rate_info (9) - bitrate information
struct_regulation_constraints (9) - regulator operating constraints.
struct_regulator_bulk_data (9) - Data used for bulk regulator operations.
struct_regulator_ops (9) - regulator operations.
struct_rio_ops (9) - Low-level RIO configuration space operations
struct_rio_scan (9) - RIO enumeration and discovery operations
struct_rio_scan_node (9) - list node to register RapidIO enumeration and disc...
struct_rio_switch_ops (9) - Per-switch operations
struct_rng_alg (9) - random number generator definition
struct_snd_dmaengine_dai_dma_data (9) - DAI DMA configuration data
struct_snd_dmaengine_pcm_config (9) - Configuration data for dmaengine based PCM
struct_spi_flash_read_message (9) - flash specific information for spi-master...
struct_usb_composite_driver (9) - groups configurations into a gadget
struct_usb_configuration (9) - represents one gadget configuration
struct_usb_function (9) - describes one function of a configuration
struct_usb_host_config (9) - representation of a device's configuration
struct_w1_bus_master (9) - operations available on a bus master
struct_w1_family_ops (9) - operations for a family type
Sub::Defer (3pm) - defer generation of subroutines until they are first c...
Sub::Exporter::Cookbook (3pm) - useful, demonstrative, or stupid Sub::Exporte...
Sub::Quote (3pm) - efficient generation of subroutines via string eval
subsys_dev_iter_exit (9) - finish iteration
subsys_dev_iter_init (9) - initialize subsys device iterator
subsys_dev_iter_next (9) - iterate to the next device
subsys_find_device_by_id (9) - find a device with a specific enumeration number
svnadmin (1) - Subversion repository administration tool
svnserve.conf (5) - Repository configuration file for svnserve
swish++.conf (5) - SWISH++ configuration file format
sysconf (3) - get configuration information at run time
sysctl.conf (5) - sysctl preload/configuration file
sysstat (5) - sysstat configuration file.
systemd-cryptsetup-generator (8) - Unit generator for /etc/crypttab
systemd-debug-generator (8) - Generator for enabling a runtime debug shell an...
systemd-delta (1) - Find overridden configuration files
systemd-efi-boot-generator (8) - Generator for automatically mounting the EFI...
systemd-fstab-generator (8) - Unit generator for /etc/fstab
systemd-getty-generator (8) - Generator for enabling getty instances on the c...
systemd-gpt-auto-generator (8) - Generator for automatically discovering and ...
systemd-machined (8) - Virtual machine and container registration manager
systemd-machined.service (8) - Virtual machine and container registration man...
systemd-sleep.conf (5) - Suspend and hibernation configuration file
systemd-system-update-generator (8) - Generator for redirecting boot to offli...
systemd-system.conf (5) - System and session service manager configuration file
systemd-user.conf (5) - System and session service manager configuration file
systemd.automount (5) - Automount unit configuration
systemd.device (5) - Device unit configuration
systemd.directives (7) - Index of configuration directives
systemd.exec (5) - Execution environment configuration
systemd.kill (5) - Process killing procedure configuration
systemd.link (5) - Network device configuration
systemd.mount (5) - Mount unit configuration
systemd.netdev (5) - Virtual Network Device configuration
systemd.network (5) - Network configuration
systemd.path (5) - Path unit configuration
systemd.scope (5) - Scope unit configuration
systemd.service (5) - Service unit configuration
systemd.slice (5) - Slice unit configuration
systemd.snapshot (5) - Snapshot unit configuration
systemd.socket (5) - Socket unit configuration
systemd.swap (5) - Swap unit configuration
systemd.target (5) - Target unit configuration
systemd.timer (5) - Timer unit configuration
systemd.unit (5) - Unit configuration
sysusers.d (5) - Declarative allocation of system users and groups
TAP::Parser::Iterator (3perl) - Base class for TAP source iterators
TAP::Parser::Iterator::Array (3perl) - Iterator for array-based TAP sources
TAP::Parser::Iterator::Process (3perl) - Iterator for process-based TAP sources
TAP::Parser::Iterator::Stream (3perl) - Iterator for filehandle-based TAP sou...
TAP::Parser::IteratorFactory (3perl) - Figures out which SourceHandler object...
TAP::Parser::YAMLish::Reader (3perl) - Read YAMLish data from iterator
tbl-dctrl (1) - generate tabular representations of data in dctrl format
tcdrain (3) - get and set terminal attributes, line control, get and...
tcflow (3) - get and set terminal attributes, line control, get and...
tcflush (3) - get and set terminal attributes, line control, get and...
tcgetattr (3) - get and set terminal attributes, line control, get and...
tcpdchk (8) - tcp wrapper configuration checker
tcsendbreak (3) - get and set terminal attributes, line control, get and...
tcsetattr (3) - get and set terminal attributes, line control, get and...
termios (3) - get and set terminal attributes, line control, get and...
testparm (1) - check an smb.conf configuration file for internal corr...
Text::Diff::Config (3pm) - global configuration for Text::Diff (as a separate...
Text::Diff::Table (3pm) - Text::Diff plugin to generate "table" format output
time.conf (5) - configuration file for the pam_time module
timeradd (3) - timeval operations
timerclear (3) - timeval operations
timercmp (3) - timeval operations
timerisset (3) - timeval operations
timersub (3) - timeval operations
tinc.conf (5) - tinc daemon configuration
tmpfiles.d (5) - Configuration for creation, deletion and cleaning of v...
towctrans (3) - wide-character transliteration
trace_block_bio_backmerge (9) - merging block operation to the end of an exis...
trace_block_bio_bounce (9) - used bounce buffer when processing block operation
trace_block_bio_complete (9) - completed all work on the block operation
trace_block_bio_frontmerge (9) - merging block operation to the beginning of ...
trace_block_bio_queue (9) - putting new block IO operation in queue
trace_block_getrq (9) - get a free request entry in queue for block IO operat...
trace_block_plug (9) - keep operations requests in request queue
trace_block_rq_abort (9) - abort block operation request
trace_block_rq_complete (9) - block IO operation completed by device driver
trace_block_rq_insert (9) - insert block operation request into queue
trace_block_rq_issue (9) - issue pending block IO request operation to device...
trace_block_rq_remap (9) - map request for a block operation request
trace_block_sleeprq (9) - waiting to get a free request entry in queue for bl...
trace_block_unplug (9) - release of operations requests in request queue
trace_signal_generate (9) - called when a signal is generated
Type::Tiny::_HalfOp (3pm) - half-completed overloaded operation
uart_get_baud_rate (9) - return baud rate for a particular port
ucf (1) - Update Configuration File: preserve user changes in co...
ucf.conf (5) - site-wide configuration file for ucf
ucfr (1) - Update Configuration File Registry: associate packages...
unregister_syscore_ops (9) - Unregister a set of system core operations.
update-dlocatedb (8) - generate text database of installed files for dlocate
update-initramfs (8) - generate an initramfs image
update-initramfs.conf (5) - configuration file for update-initramfs
usb_add_config (9) - add a configuration to a device.
usb_add_function (9) - add a function to a configuration
usb_bus_start_enum (9) - start immediate enumeration (for OTG)
usb_driver_set_configuration (9) - Provide a way for drivers to change device...
usb_find_alt_setting (9) - Given a configuration, find the alternate setting ...
usb_for_each_dev (9) - iterate over all USB devices in the system
usb_function_activate (9) - allow function and gadget enumeration
usb_function_deactivate (9) - prevent function and gadget enumeration
usb_gadget_config_buf (9) - builts a complete configuration descriptor
usb_hub_for_each_child (9) - iterate over all child devices on the hub
usb_reset_configuration (9) - lightweight device reset
vconfig (8) - VLAN (802.1q) configuration program.
vmm.cfg (5) - configuration file for vmm
w1_pre_write (9) - pre-write operations
w1_read_bit (9) - Generates a write-1 cycle and samples the level.
w1_touch_bit (9) - Generates a write-0 or write-1 cycle and samples the l...
w1_write_bit (9) - Generates a write-0 or write-1 cycle.
windmc (1) - generates Windows message resources.
X509_NAME_entry_count (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_entry (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_index_by_NID (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_index_by_OBJ (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_text_by_NID (3ssl) - X509_NAME lookup and enumeration functions
X509_NAME_get_text_by_OBJ (3ssl) - X509_NAME lookup and enumeration functions
x509v3_config (5ssl) - X509 V3 certificate extension configuration format
x86_64-linux-gnu-ranlib (1) - generate index to archive.
xdr_set_scratch_buffer (9) - Attach a scratch buffer for decoding data.
xdriinfo (1) - query configuration information of DRI drivers
xfs_ncheck (8) - generate pathnames from i-numbers for XFS
Xsession.options (5) - configuration options for Xsession (5)
Xwrapper.config (5) - configuration options for X server wrapper
yield_to (9) - yield the current processor to another thread in your ...
|