| tro(3WN) - phpMan
BIO_reset (3ssl) - BIO control operations
Git (3pm) - Perl interface to the Git version control system
__setfpucw (3) - set FPU control word on i386 architecture (obsolete)
__unregister_chrdev (9) - unregister and destroy a cdev
access.conf (5) - the login access control table file
acl (5) - Access Control Lists
addseverity (3) - introduce new severity classes
anvil (8postfix) - Postfix session count and request rate control
apache2ctl (8) - Apache HTTP server control interface
apachectl (8) - Apache HTTP server control interface
apt_preferences (5) - Preference control file for APT
ata_mselect_control (9) - Simulate MODE SELECT for control page
ata_msense_control (9) - Simulate MODE SENSE control mode page
ata_sas_port_destroy (9) - Destroy a SATA port allocated by ata_sas_port_alloc
ata_scsi_slave_destroy (9) - SCSI device is about to be destroyed
auth_destroy (3) - library routines for remote procedure calls
avc_destroy (3) - userspace SELinux AVC setup and teardown
bd_unlink_disk_holder (9) - destroy symlinks created by bd_link_disk_holder
BIO_callback_ctrl (3ssl) - BIO control operations
BIO_ctrl (3ssl) - BIO control operations
BIO_ctrl_pending (3ssl) - BIO control operations
BIO_ctrl_wpending (3ssl) - BIO control operations
BIO_destroy_bio_pair (3ssl) - BIO pair BIO
BIO_eof (3ssl) - BIO control operations
BIO_flush (3ssl) - BIO control operations
BIO_get_close (3ssl) - BIO control operations
BIO_get_info_callback (3ssl) - BIO control operations
BIO_int_ctrl (3ssl) - BIO control operations
BIO_pending (3ssl) - BIO control operations
BIO_ptr_ctrl (3ssl) - BIO control operations
BIO_seek (3ssl) - BIO control operations
BIO_set_close (3ssl) - BIO control operations
BIO_set_info_callback (3ssl) - BIO control operations
BIO_tell (3ssl) - BIO control operations
BIO_wpending (3ssl) - BIO control operations
bootparam (7) - introduction to boot time parameters of the Linux kernel
btrfs (8) - control a btrfs filesystem
btrfs-device (8) - control btrfs devices
btrfs-filesystem (8) - control btrfs filesystem
btrfs-qgroup (8) - control the quota group of a btrfs filesystem
btrfs-quota (8) - control the quota of a btrfs filesystem
btrfs-subvolume (8) - control btrfs subvolume(s)
busctl (1) - Introspect the bus
cfgetispeed (3) - get and set terminal attributes, line control, get and...
cfgetospeed (3) - get and set terminal attributes, line control, get and...
cfmakeraw (3) - get and set terminal attributes, line control, get and...
cfsetispeed (3) - get and set terminal attributes, line control, get and...
cfsetospeed (3) - get and set terminal attributes, line control, get and...
cfsetspeed (3) - get and set terminal attributes, line control, get and...
cgconfigparser (8) - setup control group file system
cgdelete (1) - remove control group(s)
cgexec (1) - run the task in given control groups
cgrulesengd (8) - control group rules daemon
cgsnapshot (1) - generate the configuration file for given controllers
chacl (1) - change the access control list of a file or directory
ckbcomp (1) - compile a XKB keyboard description to a keymap suitabl...
class_destroy (9) - destroys a struct class structure
clnt_control (3) - library routines for remote procedure calls
clnt_destroy (3) - library routines for remote procedure calls
console_codes (4) - Linux console escape and control sequences
CPAN::Distroprefs (3perl) - - read and match distroprefs
CRYPTO_destroy_dynlockid (3ssl) - OpenSSL thread support
CRYPTO_set_dynlock_destroy_callback (3ssl) - OpenSSL thread support
ctermid (3) - get controlling terminal name
deb-control (5) - Debian packages' master control file format
deb-src-control (5) - Debian source packages' master control file format
debug_object_destroy (9) - debug checks when an object is destroyed
destroy_rcu_head_on_stack (9) - destroy on-stack rcu_head for debugobjects
destroy_workqueue (9) - safely terminate a workqueue
dev_set_mac_address (9) - Change Media Access Control Address
device_destroy (9) - removes a device that was created with device_create
devm_spi_register_master (9) - register managed SPI master controller
devres_destroy (9) - Find a device resource and destroy it
devres_release (9) - Find a device resource and destroy it, calling release
dh_gencontrol (1) - generate and install control file
dh_testroot (1) - ensure that a package is built as root
dma_pool_destroy (9) - destroys a pool of dma memory blocks.
dmam_pool_destroy (9) - Managed dma_pool_destroy
dmesg (1) - print or control the kernel ring buffer
do_pata_set_dmamode (9) - Initialize host controller PATA PIO timings
dpkg-gencontrol (1) - generate Debian control files
Dpkg::Control (3) - parse and manipulate official control-like information
Dpkg::Control::Changelog (3) - represent info fields output by dpkg-parsechan...
Dpkg::Control::Fields (3) - manage (list of official) control fields
Dpkg::Control::FieldsCore (3) - manage (list of official) control fields
Dpkg::Control::Hash (3) - parse and manipulate a block of RFC822-like fields
Dpkg::Control::HashCore (3) - parse and manipulate a block of RFC822-like fields
Dpkg::Control::Info (3) - parse files like debian/control
Dpkg::Control::Types (3) - export CTRL_* constants
Dpkg::Index (3) - generic index of control information
enum_ieee80211_rate_control_changed (9) - flags to indicate what changed
enum_mac80211_rate_control_flags (9) - per-rate flags set by the Rate Control...
enum_mac80211_tx_control_flags (9) - flags to describe transmit control
epoll_ctl (2) - control interface for an epoll descriptor
eqn (1) - format equations for troff or MathML
ethtool (8) - query or control network driver and hardware settings
EVP_MD_CTX_destroy (3ssl) - EVP digest routines
EVP_PKEY_ctrl (3ssl) - algorithm specific control operations
EVP_PKEY_ctrl_str (3ssl) - algorithm specific control operations
EVP_PKEY_CTX_ctrl (3ssl) - algorithm specific control operations
fail2ban-client (1) - configure and control the server
fb_destroy_modelist (9) - destroy modelist
fegetround (3) - floating-point rounding and exception handling
fesetround (3) - floating-point rounding and exception handling
filetest (3perl) - Perl pragma to control the filetest permission operators
free_rs (9) - Free the rs control structure, if it is no longer used
geqn (1) - format equations for troff or MathML
getfacl (1) - get file access control lists
git-bisect (1) - Find by binary search the change that introduced a bug
git-cherry-pick (1) - Apply the changes introduced by some existing commits
git-whatchanged (1) - Show logs with difference each commit introduces
gittutorial (7) - A tutorial introduction to Git (for version 1.5.1 or n...
gittutorial-2 (7) - A tutorial introduction to Git: part two
gpic (1) - compile pictures for troff or TeX
grep-aptavail (1) - grep Debian control files
grep-available (1) - grep Debian control files
grep-dctrl (1) - grep Debian control files
grep-debtags (1) - grep Debian control files
grep-status (1) - grep Debian control files
gtbl (1) - format tables for troff
handle_fasteoi_irq (9) - irq handler for transparent controllers
hcd_buffer_destroy (9) - deallocate buffer pools
hdestroy (3) - hash table management
hdestroy_r (3) - hash table management
hostnamectl (1) - Control the system hostname
hosts.allow (5) - format of host access control files
hosts.deny (5) - format of host access control files
hosts_access (5) - format of host access control files
hosts_options (5) - host access control language extensions
hsi_alloc_controller (9) - Allocate an HSI controller and its ports
hsi_async (9) - Submit an HSI transfer to the controller
hsi_id (9) - Get HSI controller ID associated to a client
hsi_put_controller (9) - Free an HSI controller
hsi_register_controller (9) - Register an HSI controller and its ports
hsi_unregister_controller (9) - Unregister an HSI controller
ht_destroy_irq (9) - destroy an irq created with ht_create_irq
ich_pata_cable_detect (9) - Probe host controller cable detect info
ich_set_dmamode (9) - Initialize host controller PATA DMA timings
ida_destroy (9) - release all cached layers within an ida tree
idr_destroy (9) - release all cached layers within an idr tree
ieee80211_hdrlen (9) - get header length in bytes from frame control
init_rs (9) - Find a matching or allocate a new rs control structure
init_rs_non_canonical (9) - Find a matching or allocate a new rs control stru...
initramfs-tools (8) - an introduction to writing scripts for mkinitramfs
input_ff_destroy (9) - frees force feedback portion of input device
input_mt_destroy_slots (9) - frees the MT slots of the input device
intro (1) - introduction to user commands
intro (2) - introduction to system calls
intro (3) - introduction to library functions
intro (4) - introduction to special files
intro (5) - introduction to file formats
intro (6) - introduction to games
intro (7) - introduction to overview, conventions, and miscellany ...
intro (8) - introduction to administration and privileged commands
io_destroy (2) - destroy an asynchronous I/O context
ioctl (2) - control device
ipmitool (1) - utility for controlling IPMI-enabled devices
irq_set_affinity_notifier (9) - control notification of IRQ affinity changes
irq_set_irq_wake (9) - control irq power management wakeup
iscsi_destroy_all_flashnode (9) - destroy all flashnode session entries
iscsi_destroy_conn (9) - destroy iscsi class connection
iscsi_destroy_flashnode_sess (9) - destroy flashnode session entry
iscsi_destroy_session (9) - destroy iscsi session
iswcntrl (3) - test for control wide character
jbd2_journal_destroy (9) - Release a journal_t structure.
LDP (7) - Intro to the Linux Documentation Project, with help, g...
localectl (1) - Control the system locale and keyboard layout settings
loginctl (1) - Control the systemd login manager
losetup (8) - set up and control loop devices
lxc-cgroup (1) - manage the control group associated with a container
lxc-destroy (1) - destroy a container.
machinectl (1) - Control the systemd machine manager
Mail::Mailer (3pm) - Simple interface to electronic mailing mechanisms
Mail::Send (3pm) - Simple electronic mail interface
Mason::Manual::Intro (3pm) - Getting started with Mason
matchpathcon_filespec_destroy (3) - check and report whether any specificatio...
mempool_destroy (9) - deallocate a memory pool
mesg (1) - control write access to your terminal
Moose::Intro (3pm) - Expanded into Moose::Manual, so go read that
mpt_host_page_access_control (9) - control the IOC's Host Page Buffer access
msgctl (2) - System V message control operations
mt (1) - control magnetic tape drive operation
mt-gnu (1) - control magnetic tape drive operation
nand_select_chip (9) - [DEFAULT] control CE line
Net::DBus::Binding::Introspector (3pm) - Handler for object introspection data
Net::DBus::Binding::Value (3pm) - Strongly typed data value
overloading (3perl) - perl pragma to lexically control overloading
pam_access (8) - PAM module for logdaemon style login access control
pam_time (8) - PAM module for time control access
pci_destroy_slot (9) - decrement refcount for physical PCI slot
pcm_format_to_bits (9) - Strong-typed conversion of pcm_format to bitwise
perlguts (1) - Introduction to the Perl API
perlintro (1) - - a brief introduction and overview of Perl
perluniintro (1) - Perl Unicode introduction
pg_controldata (1) - display control information of a PostgreSQL database c...
pg_ctl (1) - initialize, start, stop, or control a PostgreSQL server
pg_recvlogical (1) - control PostgreSQL logical decoding streams
pg_resetwal (1) - reset the write-ahead log and other control informatio...
pic (1) - compile pictures for troff or TeX
piix_pata_prereset (9) - prereset for PATA host controller
piix_set_dmamode (9) - Initialize host controller PATA DMA timings
piix_set_piomode (9) - Initialize host controller PATA PIO timings
platform_device_put (9) - destroy a platform device
po-debconf (7) - introduction
postfix (1) - Postfix control program
postqueue (1) - Postfix queue control
preconv (1) - convert encoding of input files to something GNU troff...
printk_timed_ratelimit (9) - caller-controlled printk ratelimiting
procmpt_destroy (9) - Tear down MPT_PROCFS_MPTBASEDIR entries.
pthread_attr_destroy (3) - initialize and destroy thread attributes object
pthread_attr_init (3) - initialize and destroy thread attributes object
pure-ftpd-control (8) - invokes init script for installed Pure-FTPd flavour
RAND_add (3ssl) - add entropy to the PRNG
RAND_egd (3ssl) - query entropy gathering daemon
RAND_event (3ssl) - add entropy to the PRNG
RAND_screen (3ssl) - add entropy to the PRNG
RAND_seed (3ssl) - add entropy to the PRNG
RAND_status (3ssl) - add entropy to the PRNG
rate_control_send_low (9) - helper for drivers for management/no-ack frames
rec_control (1) - control pdns_recursor
relay_destroy_buf (9) - destroy an rchan_buf struct and associated buffer
relay_destroy_channel (9) - free the channel struct
RELEASE_SAVEPOINT (7) - destroy a previously defined savepoint
reservation_object_fini (9) - destroys a reservation object
rio_get_input_status (9) - Sends a Link-Request/Input-Status control symbol a...
rndc (8) - name server control utility
sata_link_scr_lpm (9) - manipulate SControl IPM and SPM fields
scsi_target_reap (9) - check to see if target is in use and destroy if not
sd-readahead (3) - Reference implementation of APIs for controlling boot-...
sd_readahead (3) - Control ongoing disk boot-time read-ahead operations
sem_destroy (3) - destroy an unnamed semaphore
semctl (2) - System V semaphore control operations
setfacl (1) - set file access control lists
shmctl (2) - System V shared memory control
smartctl (8) - Control and Monitor Utility for SMART Disks
snd_ctl_activate_id (9) - activate/inactivate the control of the given id
snd_ctl_add (9) - add the control instance to the card
snd_ctl_add_slave (9) - Add a virtual slave control
snd_ctl_add_slave_uncached (9) - Add a virtual slave control
snd_ctl_add_vmaster_hook (9) - Add a hook to a vmaster control
snd_ctl_enum_info (9) - fills the info structure for an enumerated control
snd_ctl_find_id (9) - find the control instance with the given id
snd_ctl_find_numid (9) - find the control instance with the given number-id
snd_ctl_free_one (9) - release the control instance
snd_ctl_make_virtual_master (9) - Create a virtual master control
snd_ctl_new1 (9) - create a control instance from the template
snd_ctl_notify (9) - Send notification to user-space for a control change
snd_ctl_register_ioctl (9) - register the device-specific control-ioctls
snd_ctl_register_ioctl_compat (9) - register the device-specific 32bit compat...
snd_ctl_remove (9) - remove the control from the card and release it
snd_ctl_remove_id (9) - remove the control of the given id and release it
snd_ctl_rename_id (9) - replace the id of a control on the card
snd_ctl_replace (9) - replace the control instance of the card
snd_ctl_unregister_ioctl (9) - de-register the device-specific control-ioctls
snd_ctl_unregister_ioctl_compat (9) - de-register the device-specific compat ...
snd_pcm_add_chmap_ctls (9) - create channel-mapping control elements
snd_soc_add_card_controls (9) - add an array of controls to a SoC card. Conve...
snd_soc_add_codec_controls (9) - add an array of controls to a codec. Conveni...
snd_soc_add_component_controls (9) - Add an array of controls to a component.
snd_soc_add_dai_controls (9) - add an array of controls to a DAI. Convienienc...
snd_soc_add_platform_controls (9) - add an array of controls to a platform. C...
snd_soc_cnew (9) - create new control
snd_soc_dapm_kcontrol_codec (9) - Returns the codec associated to a kcontrol
snd_soc_dapm_kcontrol_dapm (9) - Returns the dapm context associated to a kco...
snd_soc_dapm_kcontrol_widget (9) - Returns the widget associated to a kcontrol
snd_soc_dapm_new_controls (9) - create new dapm controls
snd_soc_get_strobe (9) - strobe get callback
snd_soc_info_volsw_sx (9) - Mixer info callback for SX TLV controls
snd_soc_kcontrol_codec (9) - Returns the CODEC that registered the control
snd_soc_kcontrol_component (9) - Returns the component that registered the co...
snd_soc_kcontrol_platform (9) - Returns the platform that registered the control
snd_soc_limit_volume (9) - Set new limit to an existing volume control.
snd_soc_put_strobe (9) - strobe put callback
sort (3perl) - perl pragma to control sort() behaviour
sort-dctrl (1) - sort Debian control files
spi_alloc_master (9) - allocate SPI master controller
spi_register_master (9) - register SPI master controller
spi_unregister_master (9) - unregister SPI master controller
struct_hsi_controller (9) - HSI controller device
struct_ieee80211_tx_rate_control (9) - rate control information for/from RC algo
struct_nand_ecc_ctrl (9) - Control structure for ECC
struct_nand_hw_control (9) - Control structure for hardware controller (e.g E...
struct_platform_nand_ctrl (9) - controller level device structure
struct_pwm_chip (9) - abstract a PWM controller
struct_pwm_ops (9) - PWM controller operations
struct_rs_control (9) - rs control structure
struct_spi_master (9) - interface to SPI master controller
svc (8) - controls services monitored by supervise(8).
svc_destroy (3) - library routines for remote procedure calls
systemctl (1) - Control the systemd system and service manager
systemd-cgls (1) - Recursively show control group contents
systemd-cgtop (1) - Show top control groups by their resource usage
systemd-udevd-control.socket (8) - Device event managing daemon
systemd.resource-control (5) - Resource control unit settings
tbl (1) - format tables for troff
tc (8) - show / manipulate traffic control settings
tc-codel (8) - Controlled-Delay Active Queue Management algorithm
tc-fq_codel (8) - Fair Queuing (FQ) with Controlled Delay (CoDel)
tc-hfsc (8) - Hierarchical Fair Service Curve's control under linux
tc-pie (8) - Proportional Integral controller-Enhanced AQM algorithm
tcdrain (3) - get and set terminal attributes, line control, get and...
tcflow (3) - get and set terminal attributes, line control, get and...
tcflush (3) - get and set terminal attributes, line control, get and...
tcgetattr (3) - get and set terminal attributes, line control, get and...
tcpd (8) - access control facility for internet services
tcsendbreak (3) - get and set terminal attributes, line control, get and...
tcsetattr (3) - get and set terminal attributes, line control, get and...
tdestroy (3) - manage a binary tree
Term::ReadKey (3pm) - A perl module for simple terminal control
termios (3) - get and set terminal attributes, line control, get and...
timedatectl (1) - Control the system time and date
transport_destroy_device (9) - destroy a removed device
troff (1) - the troff processor of the groff text formatting system
tty (4) - controlling terminal
uart_parse_options (9) - Parse serial port baud/parity/bits/flow control.
Unicode::Collate::CJK::Stroke (3perl) - weighting CJK Unified Ideographs for ...
usb_composite_setup_continue (9) - Continue with the control transfer
usb_control_msg (9) - Builds a control urb, sends it off and waits for compl...
usb_fill_control_urb (9) - initializes a control urb
usb_get_maximum_speed (9) - Get maximum requested speed for a given USB contr...
usb_hc_died (9) - report abnormal shutdown of a host controller (bus glue)
usb_hcd_pci_shutdown (9) - shutdown host controller
usb_hub_clear_tt_buffer (9) - clear control/bulk TT state in high speed hub
vmsish (3perl) - Perl pragma to control VMS-specific language features
w1_next_pullup (9) - register for a strong pullup
warnings (3perl) - Perl pragma to control optional warnings
wnintro (1WN) - WordNet user commands
wnintro (5WN) - introduction to descriptions of WordNet file formats
wnintro (7WN) - introduction to miscellaneous WordNet information
write_zsctrl (9) - Write to a Z8530 control register
write_zsdata (9) - Write to a Z8530 control register
xdg-screensaver (1) - command line tool for controlling the screensaver
xdr_destroy (3) - library routines for external data representation
xhost (1) - server access control program for X
xsetroot (1) - root window parameter setting utility for X
z8530_rtsdtr (9) - Control the outgoing DTS/RTS line
zshroadmap (1) - informal introduction to the zsh manual The Zsh Manual...
|