| ST(1) - phpMan
hosts.equiv (5) - list of hosts and users that are granted "trusted" r c...
CGI (3perl) - Handle Common Gateway Interface requests and responses
CGI (3pm) - Handle Common Gateway Interface requests and responses
DISCARD (7) - discard session state
Errno (3perl) - System errno constants
Git (3pm) - Perl interface to the Git version control system
LISTEN (7) - listen for a notification
LIST_ENTRY (3) - implementations of lists, tail queues, and circular qu...
NAN (3) - floating-point constants
RESET (7) - restore the value of a run-time parameter to the defau...
Socket (3perl) - networking constants and support functions
Test (3perl) - provides a simple framework for writing test scripts
Mail::SpamAssassin::Plugin::Test (3pm) - test plugin
__audit_getname (9) - add a name to the list
__audit_inode (9) - store the inode and device from a lookup
__audit_log_bprm_fcaps (9) - store information about a loading bprm and relev...
__audit_log_capset (9) - store information about the arguments to the capset ...
__audit_reusename (9) - fill out filename with info from existing entry
__audit_signal_info (9) - record signal info for shutting down audit subsystem
__audit_syscall_exit (9) - deallocate audit context after a system call
__bio_clone_fast (9) - clone a bio that shares the original bio's biovec
__bitmap_parse (9) - convert an ASCII hex string into a bitmap.
__bitmap_parselist (9) - convert list format ASCII string to bitmap
__blk_drain_queue (9) - drain requests from request_queue
__blk_end_bidi_request (9) - Complete a bidi request with queue lock held
__blk_end_request (9) - Helper function for drivers to complete the request.
__blk_end_request_all (9) - Helper function for drives to finish the request.
__blk_end_request_cur (9) - Helper function to finish the current request chunk.
__blk_end_request_err (9) - Finish a request till the next failure boundary.
__blk_run_queue_uncond (9) - run a queue whether or not it has been stopped
__break_lease (9) - revoke all outstanding leases on file
__class_create (9) - create a struct class structure
__dev_mc_sync (9) - Synchonize device's multicast list
__dev_uc_sync (9) - Synchonize device's unicast list
__fbufsize (3) - interfaces to stdio FILE structure
__ffs (9) - find first set bit in word
__flbf (3) - interfaces to stdio FILE structure
__fpending (3) - interfaces to stdio FILE structure
__fpurge (3) - purge a stream
__freadable (3) - interfaces to stdio FILE structure
__freading (3) - interfaces to stdio FILE structure
__fsetlocking (3) - interfaces to stdio FILE structure
__fwritable (3) - interfaces to stdio FILE structure
__fwriting (3) - interfaces to stdio FILE structure
__get_pfnblock_flags_mask (9) - Return the requested group of flags for the p...
__get_request (9) - get a free request
__list_del_entry (9) - deletes entry from list.
__mdiobus_register (9) - bring up all the PHYs on a given bus and attach them...
__napi_alloc_skb (9) - allocate skbuff for rx in a specific NAPI instance
__netif_subqueue_stopped (9) - test status of subqueue
__parport_register_driver (9) - register a parallel port device driver
__pci_hp_register (9) - register a hotplug_slot with the PCI hotplug subsystem
__pci_register_driver (9) - register a new pci driver
__platform_create_bundle (9) - register driver and create corresponding device
__platform_driver_probe (9) - register driver for non-hotpluggable device
__platform_driver_register (9) - register a driver for platform-level devices
__platform_register_drivers (9) - register an array of platform drivers
__register_chrdev (9) - create and register a cdev occupying a range of minors
__request_module (9) - try to load a kernel module
__request_region (9) - create a new busy resource region
__root_device_register (9) - allocate and register a root device
__scsi_device_lookup (9) - find a device given the host (UNLOCKED)
__shost_for_each_device (9) - iterate over all devices of a host (UNLOCKED)
__skb_queue_after (9) - queue a buffer at the list head
__spi_register_driver (9) - register a SPI driver
__starget_for_each_device (9) - helper to walk all devices of a target (UNLOC...
__test_and_clear_bit (9) - Clear a bit and return its old value
__test_and_set_bit (9) - Set a bit and return its old value
__uio_register_device (9) - register a new userspace IO device
__unregister_chrdev (9) - unregister and destroy a cdev
_flushlbf (3) - interfaces to stdio FILE structure
_syscall (2) - invoking a system call without library support (OBSOLETE)
_sysctl (2) - read/write system parameters
a2dissite (8) - enable or disable an apache2 site / virtual host
a2ensite (8) - enable or disable an apache2 site / virtual host
ablkcipher_request_alloc (9) - allocate request data structure
ablkcipher_request_free (9) - zeroize and free request data structure
ablkcipher_request_set_callback (9) - set asynchronous callback function
ablkcipher_request_set_crypt (9) - set data buffers
ablkcipher_request_set_tfm (9) - update cipher handle reference in request
access (5) - Postfix SMTP server access table
acct_collect (9) - collect accounting information into pacct_struct
acl (5) - Access Control Lists
acpi (1) - Shows battery status and other ACPI information
acpi_available (1) - test whether ACPI subsystem is available
acpi_listen (8) - ACPI event listener
add-shell (8) - add shells to the list of valid login shells
add_timer (9) - start a timer
add_timer_on (9) - start a timer on a particular CPU
addgroup (8) - add a user or group to the system
addmntent (3) - get filesystem descriptor file entry
adduser (8) - add a user or group to the system
adjtime (3) - correct the time to synchronize the system clock
adjust_resource (9) - modify a resource's start and size
aead_request_alloc (9) - allocate request data structure
aead_request_free (9) - zeroize and free request data structure
aead_request_set_ad (9) - set associated data information
aead_request_set_callback (9) - set asynchronous callback function
aead_request_set_crypt (9) - set data buffers
aead_request_set_tfm (9) - update cipher handle reference in request
afs_syscall (2) - unimplemented system calls
ahash_request_alloc (9) - allocate request data structure
ahash_request_free (9) - zeroize and free the request data structure
ahash_request_set_callback (9) - set asynchronous callback function
ahash_request_set_crypt (9) - set data buffers
ahash_request_set_tfm (9) - update cipher handle reference in request
aio_cancel (3) - cancel an outstanding asynchronous I/O request
aio_error (3) - get error status of asynchronous I/O operation
aio_return (3) - get return status of asynchronous I/O operation
akcipher_request_alloc (9) - allocates public key request
akcipher_request_free (9) - zeroize and free public key request
akcipher_request_set_callback (9) - Sets an asynchronous callback.
akcipher_request_set_crypt (9) - Sets request parameters
Algorithm::Diff (3pm) - Compute `intelligent' differences between two files /...
Algorithm::DiffOld (3pm) - Compute `intelligent' differences between two file...
aliases (5) - Postfix local alias database format
alien (1p) - Convert or install an alien binary package
alloc_chrdev_region (9) - register a range of char device numbers
ALTER_STATISTICS (7) - change the definition of an extended statistics object
ALTER_SYSTEM (7) - change a server configuration parameter
american-english (5) - a list of English words
ANALYZE (7) - collect statistics about a database
anon_transport_class_register (9) - register an anonymous class
anon_transport_class_unregister (9) - unregister an anon class
anvil (8postfix) - Postfix session count and request rate control
Apache2::Access (3pm) - A Perl API for Apache request object: Access, Authent...
Apache2::Const (3pm) - Perl Interface for Apache Constants
Apache2::RequestIO (3pm) - Perl API for Apache request record IO
Apache2::RequestRec (3pm) - Perl API for Apache request record accessors
Apache2::RequestUtil (3pm) - Perl API for Apache request record utils
Apache2::Response (3pm) - Perl API for Apache HTTP request response methods
Apache2::Status (3pm) - Embedded interpreter status information
Apache2::SubRequest (3pm) - Perl API for Apache subrequests
Apache::DBI (3pm) - Initiate a persistent database connection
Apache::Test (3pm) - Test.pm wrapper with helpers for testing Apache
Apache::TestConfig (3pm) - - Test Configuration setup module
Apache::TestHandler (3pm) - a few response handlers and helpers
Apache::TestMB (3pm) - Subclass of Module::Build to support Apache::Test
Apache::TestMM (3pm) - Provide MakeMaker Wrapper Methods
Apache::TestReport (3pm) - A parent class for generating bug/success reports
Apache::TestRequest (3pm) - Send requests to your Apache test server
Apache::TestRun (3pm) - Run the test suite
Apache::TestRunPerl (3pm) - Run mod_perl-requiring Test Suite
Apache::TestRunPHP (3pm) - configure and run a PHP-based test suite
Apache::TestSmoke (3pm) - Special Tests Sequence Failure Finder
Apache::TestTrace (3pm) - Helper output generation functions
Apache::TestUtil (3pm) - Utility functions for writing tests
apachetop (1) - display real-time web server statistics
apm_available (1) - test whether APM subsystem is available
App::Prove::State (3perl) - State storage for the "prove" command.
App::Prove::State::Result (3perl) - Individual test suite results.
App::Prove::State::Result::Test (3perl) - Individual test results.
appres (1) - list X application resource database
APR::Const (3pm) - Perl Interface for APR Constants
APR::Finfo (3pm) - Perl API for APR fileinfo structure
APR::IpSubnet (3pm) - Perl API for accessing APRs ip_subnet structures
APR::SockAddr (3pm) - Perl API for APR socket address structure
APR::Status (3pm) - Perl Interface to the APR_STATUS_IS_* macros
APR::String (3pm) - Perl API for manipulating APR UUIDs
APR::Table (3pm) - Perl API for manipulating APR opaque string-content ta...
apt-mark (8) - mark/unmark a package as being automatically-installed
apt-show-versions (1p) - Lists available package versions with distribution
aptitude-create-state-bundle (1) - bundle the current aptitude state
aptitude-run-state-bundle (1) - unpack an aptitude state bundle and invoke ap...
AptPkg::System (3pm) - APT system abstraction class
arch_prctl (2) - set architecture-specific thread state
Archive::Zip::FAQ (3pm) - Answers to a few frequently asked questions about A...
argz (3) - functions to handle an argz list
argz_add (3) - functions to handle an argz list
argz_add_sep (3) - functions to handle an argz list
argz_append (3) - functions to handle an argz list
argz_count (3) - functions to handle an argz list
argz_create (3) - functions to handle an argz list
argz_create_sep (3) - functions to handle an argz list
argz_delete (3) - functions to handle an argz list
argz_extract (3) - functions to handle an argz list
argz_insert (3) - functions to handle an argz list
argz_next (3) - functions to handle an argz list
argz_replace (3) - functions to handle an argz list
argz_stringify (3) - functions to handle an argz list
arp (8) - manipulate the system ARP cache
ASN1_STRING_cmp (3ssl) - ASN1_STRING utility functions
ASN1_STRING_data (3ssl) - ASN1_STRING utility functions
ASN1_STRING_dup (3ssl) - ASN1_STRING utility functions
ASN1_STRING_free (3ssl) - ASN1_STRING allocation functions
ASN1_STRING_length (3ssl) - ASN1_STRING utility functions
ASN1_STRING_length_set (3ssl) - ASN1_STRING utility functions
ASN1_STRING_new (3ssl) - ASN1_STRING allocation functions
ASN1_STRING_print_ex (3ssl) - ASN1_STRING output routines.
ASN1_STRING_print_ex_fp (3ssl) - ASN1_STRING output routines.
ASN1_STRING_set (3ssl) - ASN1_STRING utility functions
ASN1_STRING_type (3ssl) - ASN1_STRING utility functions
ASN1_STRING_type_new (3ssl) - ASN1_STRING allocation functions
asprintf (3) - print to allocated string
assert_perror (3) - test errnum and abort
ata_build_rw_tf (9) - Build ATA taskfile for given read/write request
ata_dev_init (9) - Initialize an ata_device structure
ata_down_xfermask_limit (9) - adjust dev xfer masks downward
ata_dump_status (9) - user friendly display of error info
ata_host_activate (9) - start host, request IRQ and register it
ata_host_alloc (9) - allocate and init basic ATA host resources
ata_host_alloc_pinfo (9) - alloc host and init with port_info array
ata_host_detach (9) - Detach all ports of an ATA host
ata_host_init (9) - Initialize a host struct for sas (ipr, libsas)
ata_host_register (9) - register initialized ATA host
ata_host_resume (9) - resume host
ata_host_start (9) - start and freeze ports of an ATA host
ata_host_suspend (9) - suspend host
ata_id_c_string (9) - Convert IDENTIFY DEVICE page into C string
ata_id_string (9) - Convert IDENTIFY DEVICE page into string
ata_link_init (9) - Initialize an ata_link structure
ata_link_offline (9) - test whether the given link is offline
ata_link_online (9) - test whether the given link is online
ata_mode_string (9) - convert xfer_mask to string
ata_phys_link_offline (9) - test whether the given link is offline
ata_phys_link_online (9) - test whether the given link is online
ata_qc_new_init (9) - Request an available ATA command, and initialize it
ata_sas_port_destroy (9) - Destroy a SATA port allocated by ata_sas_port_alloc
ata_sas_port_start (9) - Set port up for dma.
ata_sas_port_stop (9) - Undo ata_sas_port_start
ata_scsi_slave_destroy (9) - SCSI device is about to be destroyed
ata_scsi_start_stop_xlat (9) - Translate SCSI START STOP UNIT command
ata_scsiop_inq_00 (9) - Simulate INQUIRY VPD page 0, list of pages
ata_scsiop_inq_std (9) - Simulate INQUIRY command
ata_std_bios_param (9) - generic bios head/sector/cylinder calculator used by...
ata_std_postreset (9) - standard postreset callback
ata_std_prereset (9) - prepare for reset
ata_std_qc_defer (9) - Check whether a qc needs to be deferred
ata_tf_to_fis (9) - Convert ATA taskfile to SATA FIS structure
ata_wait_register (9) - wait until register value changes
atexit (3) - register a function to be called at normal process ter...
atof (3) - convert a string to a double
atoi (3) - convert a string to an integer
atol (3) - convert a string to an integer
atoll (3) - convert a string to an integer
atomic_add_negative (9) - add and test if negative
atomic_dec_and_test (9) - decrement and test
atomic_inc_and_test (9) - increment and test
atomic_sub_and_test (9) - subtract value from variable and test result
atoq (3) - convert a string to an integer
audit_compare_dname_path (9) - compare given dentry name with last component ...
audit_list_rules_send (9) - list the audit rules
audit_log_start (9) - obtain an audit buffer
auditsc_get_stamp (9) - get local copies of audit_context values
auth_destroy (3) - library routines for remote procedure calls
Authen::PAM::FAQ (3pm) - Frequently-Asked Questions about Authen::PAM.
Authen::SASL::Perl::DIGEST_MD5 (3pm) - Digest MD5 Authentication class
autodie::exception::system (3perl) - Exceptions from autodying system().
autopoint (1) - copies standard gettext infrastructure
autouse (3perl) - postpone load of modules until a function is used
avc_av_stats (3) - obtain userspace SELinux AVC statistics
avc_cache_stats (3) - obtain userspace SELinux AVC statistics
avc_destroy (3) - userspace SELinux AVC setup and teardown
avc_sid_stats (3) - obtain userspace SELinux AVC statistics
awstats (1) - a free web server logfile analyzer to show you advance...
balance_dirty_pages_ratelimited (9) - balance dirty memory state
base (3perl) - Establish an ISA relationship with base classes at com...
base64 (1) - base64 encode/decode data and print to standard output
basename (1) - strip directory and suffix from filenames
bd_unlink_disk_holder (9) - destroy symlinks created by bd_link_disk_holder
bdev_dax_supported (9) - Check if the device supports dax for filesystem
bdev_read_page (9) - Start reading a page from a block device
bdev_stack_limits (9) - adjust queue limits for stacked drivers
bdev_write_page (9) - Start writing a page to a block device
bdflush (2) - start, flush, or tune buffer-dirty-flush daemon
be16toh (3) - convert values between host and big-/little-endian byt...
be32toh (3) - convert values between host and big-/little-endian byt...
be64toh (3) - convert values between host and big-/little-endian byt...
BEGIN (7) - start a transaction block
bh_uptodate_or_lock (9) - Test whether the buffer is uptodate
bind9-config (1) - Get information about the installed version of ISC BIND
bio (3ssl) - I/O abstraction
bio_clone_fast (9) - clone a bio that shares the original bio's biovec
BIO_ctrl_get_read_request (3ssl) - BIO pair BIO
BIO_ctrl_reset_read_request (3ssl) - BIO pair BIO
BIO_destroy_bio_pair (3ssl) - BIO pair BIO
BIO_f_md (3ssl) - message digest BIO filter
BIO_get_cipher_status (3ssl) - cipher BIO filter
BIO_get_conn_hostname (3ssl) - connect BIO
BIO_get_md (3ssl) - message digest BIO filter
BIO_get_md_ctx (3ssl) - message digest BIO filter
BIO_get_read_request (3ssl) - BIO pair BIO
BIO_new_CMS (3ssl) - CMS streaming filter BIO
BIO_set_conn_hostname (3ssl) - connect BIO
BIO_set_md (3ssl) - message digest BIO filter
Bit::Vector::String (3pm) - Generic string import/export for Bit::Vector
bitmap_parse_user (9) - convert an ASCII hex string in a user buffer into a b...
bitmap_parselist_user (9) - (unknown subject)
bitmap_print_to_pagebuf (9) - convert bitmap to list or hex format ASCII string
blib (3perl) - Use MakeMaker's uninstalled version of a package
blk_add_request_payload (9) - add a payload to a request
blk_add_trace_rq (9) - Add a trace for a request oriented action
blk_add_trace_rq_remap (9) - Add a trace for a request-remap operation
blk_attempt_plug_merge (9) - try to merge with current's plugged list
blk_cleanup_queue (9) - shutdown a request queue
blk_cloned_rq_check_limits (9) - Helper function to check a cloned request fo...
blk_delay_queue (9) - restart queueing after defined interval
blk_end_bidi_request (9) - Complete a bidi request
blk_end_request (9) - Helper function for drivers to complete the request.
blk_end_request_all (9) - Helper function for drives to finish the request.
blk_end_request_cur (9) - Helper function to finish the current request chunk.
blk_end_request_err (9) - Finish a request till the next failure boundary.
blk_execute_rq (9) - insert a request into queue for execution
blk_execute_rq_nowait (9) - insert a request into queue for execution
blk_fetch_request (9) - fetch a request from a request queue
blk_init_queue (9) - prepare a request queue for use with a block device
blk_insert_cloned_request (9) - Helper for stacking drivers to submit a request
blk_integrity_register (9) - Register a gendisk as being integrity-capable
blk_integrity_unregister (9) - Unregister block integrity profile
blk_limits_io_min (9) - set minimum request size for a device
blk_limits_io_opt (9) - set optimal request size for a device
blk_peek_request (9) - peek at the top of a request queue
blk_post_runtime_resume (9) - Post runtime resume processing
blk_post_runtime_suspend (9) - Post runtime suspend processing
blk_queue_bypass_start (9) - enter queue bypass mode
blk_queue_end_tag (9) - end tag operations for a request
blk_queue_find_tag (9) - find a request by its tag and queue
blk_queue_io_min (9) - set minimum request size for the queue
blk_queue_io_opt (9) - set optimal request size for the queue
blk_queue_make_request (9) - define an alternate make_request function for a ...
blk_queue_max_hw_sectors (9) - set max sectors for a request for this queue
blk_queue_max_segments (9) - set max hw segments for a request for this queue
blk_queue_prep_rq (9) - set a prepare_request function for queue
blk_queue_stack_limits (9) - inherit underlying queue limits for stacked drivers
blk_queue_start_tag (9) - find a free tag and assign it
blk_queue_unprep_rq (9) - set an unprepare_request function for queue
blk_release_queue (9) - release a struct request_queue when it is no longer n...
blk_requeue_request (9) - put a request back on queue
blk_rq_count_integrity_sg (9) - Count number of integrity scatterlist elements
blk_rq_map_integrity_sg (9) - Map integrity metadata into a scatterlist
blk_rq_map_kern (9) - map kernel data to a request, for REQ_TYPE_BLOCK_PC usage
blk_rq_map_user_iov (9) - map user data to a request, for REQ_TYPE_BLOCK_PC u...
blk_rq_prep_clone (9) - Helper function to setup clone request
blk_rq_set_block_pc (9) - initialize a request to type BLOCK_PC
blk_rq_unmap_user (9) - unmap a request with user data
blk_rq_unprep_clone (9) - Helper function to free all bios in a cloned request
blk_set_runtime_active (9) - Force runtime status of the queue to be active
blk_set_stacking_limits (9) - set default limits for stacking devices
blk_stack_limits (9) - adjust queue_limits for stacked devices
blk_start_plug (9) - initialize blk_plug and track it inside the task_struct
blk_start_queue (9) - restart a previously stopped queue
blk_start_queue_async (9) - asynchronously restart a previously stopped queue
blk_start_request (9) - start request processing on the driver
blk_stop_queue (9) - stop a queue
blk_trace_shutdown (9) - stop and cleanup trace structures
blk_unprep_request (9) - unprepare a request
blk_update_request (9) - Special helper function for request stacking drivers
BN_cmp (3ssl) - BIGNUM comparison and test functions
BN_CTX_free (3ssl) - allocate and free BN_CTX structures
BN_CTX_init (3ssl) - allocate and free BN_CTX structures
BN_CTX_new (3ssl) - allocate and free BN_CTX structures
BN_CTX_start (3ssl) - use temporary BIGNUM variables
BN_generate_prime (3ssl) - generate primes and test for primality
BN_is_odd (3ssl) - BIGNUM comparison and test functions
BN_is_one (3ssl) - BIGNUM comparison and test functions
BN_is_prime (3ssl) - generate primes and test for primality
BN_is_prime_fasttest (3ssl) - generate primes and test for primality
BN_is_word (3ssl) - BIGNUM comparison and test functions
BN_is_zero (3ssl) - BIGNUM comparison and test functions
BN_ucmp (3ssl) - BIGNUM comparison and test functions
body_checks (5) - Postfix built-in content inspection
bootup (7) - System bootup process
bounce (5) - Postfix bounce message template format
bounce (8postfix) - Postfix delivery status reports
bprintf (9) - Parse a format string and place args' binary value in ...
brctl (8) - ethernet bridge administration
break (2) - unimplemented system calls
bstr_printf (9) - Format a string from binary arguments and place it in ...
bstring (3) - byte string operations
btrfs (5) - mount options and supported file attributes for the bt...
btrfs (8) - control a btrfs filesystem
btrfs-balance (8) - balance btrfs filesystem
btrfs-check (8) - check or repair a btrfs filesystem offline
btrfs-convert (8) - convert from ext2/3/4 filesystem to btrfs or rollback
btrfs-debug-tree (8) - dump btrfs filesystem metadata into stdout
btrfs-filesystem (8) - control btrfs filesystem
btrfs-image (8) - create/restore an image of the filesystem
btrfs-property (8) - get/set/list properties for given btrfs object.
btrfs-qgroup (8) - control the quota group of a btrfs filesystem
btrfs-quota (8) - control the quota of a btrfs filesystem
btrfs-receive (8) - receive subvolumes from stdin/file.
btrfs-rescue (8) - Recover a damaged btrfs filesystem
btrfs-restore (8) - try to restore files from a damaged btrfs filesystem(u...
btrfs-scrub (8) - scrub btrfs filesystem
btrfs-send (8) - send data of subvolume(s) to stdout/file.
btrfs-show-super (8) - show btrfs superblock information stored in devices
btrfsck (8) - check or repair a btrfs filesystem offline
btrfstune (8) - tune various btrfs filesystem parameters
BUF_MEM_free (3ssl) - simple character array structure
BUF_MEM_grow (3ssl) - simple character array structure
BUF_MEM_new (3ssl) - simple character array structure
BUF_MEM_new_ex (3ssl) - simple character array structure
BUF_memdup (3ssl) - standard C library equivalents
BUF_strdup (3ssl) - standard C library equivalents
BUF_strlcat (3ssl) - standard C library equivalents
BUF_strlcpy (3ssl) - standard C library equivalents
BUF_strndup (3ssl) - standard C library equivalents
buffer (3ssl) - simple character array structure
builtin_driver (9) - Helper macro for drivers that don't do anything specia...
builtin_i2c_driver (9) - Helper macro for registering a builtin I2C driver
Bundle::Apache2 (3pm) - Install Apache mod_perl2 and related modules
Bundle::ApacheTest (3pm) - A bundle to install all Apache-Test related modules
Bundle::DBD::Pg (3pm) - A bundle to install all DBD::Pg related modules
Bundle::DBI (3pm) - A bundle to install DBI and required modules.
bus_register (9) - register a driver-core subsystem
bus_unregister (9) - remove a bus from the system
byteorder (3) - convert values between host and network byte order
bzcat (1) - decompresses files to stdout
c2ph (1) - Dump C structures as generated from "cc - g - S" stabs
cacademo (1) - libcaca's demonstration applications
cacafire (1) - libcaca's demonstration applications
Cache::BaseCache (3pm) - - abstract cache base class
Cache::BaseCacheTester (3pm) - - abstract cache tester base class
Cache::CacheTester (3pm) - - a class for regression testing caches
Cache::FileBackend (3pm) - - a filesystem based persistance mechanism
Cache::MemoryBackend (3pm) - - a memory based persistance mechanism
Cache::Object (3pm) - - the data stored in a Cache.
Cache::SharedMemoryBackend (3pm) - - a shared memory based persistance mechanism
Cache::SizeAwareCacheTester (3pm) - - a class for regression testing size awa...
cacheflush (2) - flush contents of instruction and/or data cache
cal (1) - displays a calendar and the date of Easter
call_usermodehelper (9) - prepare and start a usermode application
call_usermodehelper_exec (9) - start a usermode application
canonical (5) - Postfix canonical table format
Capture::Tiny (3pm) - Capture STDOUT and STDERR from Perl, XS or external pr...
cat (1) - concatenate files and print on the standard output
cbc_crypt (3) - fast DES encryption
ccw_device_clear (9) - terminate I/O request processing
ccw_device_halt (9) - halt I/O request processing
ccw_device_set_options_mask (9) - set some options and unset the rest
ccw_device_start (9) - start a s390 channel program
ccw_device_start_key (9) - start a s390 channel program with key
ccw_device_start_timeout (9) - start a s390 channel program with timeout
ccw_device_start_timeout_key (9) - start a s390 channel program with timeout ...
ccw_device_tm_start (9) - perform start function
ccw_device_tm_start_key (9) - perform start function
ccw_device_tm_start_timeout (9) - perform start function
ccw_device_tm_start_timeout_key (9) - perform start function
ccw_driver_register (9) - register a ccw driver
ccw_driver_unregister (9) - deregister a ccw driver
ccwgroup_create_dev (9) - create and register a ccw group device
ccwgroup_driver_register (9) - register a ccw group driver
ccwgroup_driver_unregister (9) - deregister a ccw group driver
cdev_add (9) - add a char device to the system
cdev_alloc (9) - allocate a cdev structure
cdev_del (9) - remove a cdev from the system
cdev_init (9) - initialize a cdev structure
ceil (3) - ceiling function: smallest integral value not less tha...
ceilf (3) - ceiling function: smallest integral value not less tha...
ceill (3) - ceiling function: smallest integral value not less tha...
cfg80211_mgmt_tx_status (9) - notification of TX status for management frame
cfg80211_new_sta (9) - notify userspace about station
cfg80211_ready_on_channel (9) - notification of remain_on_channel start
cfg80211_testmode_alloc_event_skb (9) - allocate testmode event
cfg80211_testmode_alloc_reply_skb (9) - allocate testmode reply
cfg80211_testmode_event (9) - send the event
cfg80211_testmode_reply (9) - send the reply skb
cfg80211_unlink_bss (9) - unlink BSS from internal data structures
cgclear (1) - unload the cgroup filesystem
cgconfigparser (8) - setup control group file system
cgi-fcgi (1) - bridge from CGI to FastCGI
CGI::Fast (3pm) - CGI Interface for Fast CGI
chacl (1) - change the access control list of a file or directory
charsets (7) - character set standards and internationalization
chattr (1) - change file attributes on a Linux file system
check_conflicting_open (9) - see if the given dentry points to a file that ha...
check_disk_size_change (9) - checks for disk size change and adjusts bdev size.
cidr_table (5) - format of Postfix CIDR tables
cifsiostat (1) - Report CIFS statistics.
ciphers (1ssl) - SSL cipher display and cipher list tool.
CIRCLEQ_ENTRY (3) - implementations of lists, tail queues, and circular qu...
CIRCLEQ_HEAD (3) - implementations of lists, tail queues, and circular qu...
CIRCLEQ_INIT (3) - implementations of lists, tail queues, and circular qu...
CIRCLEQ_INSERT_AFTER (3) - implementations of lists, tail queues, and circula...
CIRCLEQ_INSERT_BEFORE (3) - implementations of lists, tail queues, and circul...
CIRCLEQ_INSERT_HEAD (3) - implementations of lists, tail queues, and circular...
CIRCLEQ_INSERT_TAIL (3) - implementations of lists, tail queues, and circular...
CIRCLEQ_REMOVE (3) - implementations of lists, tail queues, and circular qu...
clambc (1) - Bytecode Analysis and Testing Tool
clamp (9) - return a value clamped to a given range with strict ty...
Class::Accessor::Fast (3pm) - Faster, but less expandable, accessors
Class::Accessor::Faster (3pm) - Even faster, but less expandable, accessors
Class::Inspector (3pm) - Get information about a class and its structure
Class::Inspector::Functions (3pm) - Get information about a class and its str...
Class::MOP::Instance (3pm) - Instance Meta Object
Class::MOP::Method::Constructor (3pm) - Method Meta Object for constructors
Class::MOP::Method::Generated (3pm) - Abstract base class for generated methods
Class::Struct (3perl) - declare struct-like datatypes as Perl classes
Class::Tiny (3pm) - Minimalist class construction
Class::XSAccessor (3pm) - Generate fast XS accessors without runtime compilation
Class::XSAccessor::Array (3pm) - Generate fast XS accessors without runtime c...
class_compat_register (9) - register a compatibility class
class_compat_unregister (9) - unregister a compatibility class
class_destroy (9) - destroys a struct class structure
cleanup (8postfix) - canonicalize and enqueue Postfix message
cleanup_srcu_struct (9) - deconstruct a sleep-RCU structure
clearerr (3) - check and reset stream status
clearerr_unlocked (3) - nonlocking stdio functions
clk_disable (9) - inform the system when the clock source is no longer r...
clk_enable (9) - inform the system when the clock source should be runn...
clk_notifier_register (9) - change notifier callback
clk_notifier_unregister (9) - change notifier callback
clk_round_rate (9) - adjust a rate to the exact rate a clock can provide
clk_set_phase (9) - adjust the phase shift of a clock signal
clnt_broadcast (3) - library routines for remote procedure calls
clnt_destroy (3) - library routines for remote procedure calls
closelog (3) - send messages to the system logger
CLUSTER (7) - cluster a table according to an index
clusterdb (1) - cluster a PostgreSQL database
CMS_add0_recipient_key (3ssl) - add recipients to a CMS enveloped data structure
CMS_add1_ReceiptRequest (3ssl) - CMS signed receipt request functions.
CMS_add1_recipient_cert (3ssl) - add recipients to a CMS enveloped data struc...
CMS_add1_signer (3ssl) - add a signer to a CMS_ContentInfo signed data struct...
CMS_compress (3ssl) - create a CMS CompressedData structure
CMS_decrypt (3ssl) - decrypt content from a CMS envelopedData structure
CMS_encrypt (3ssl) - create a CMS envelopedData structure
CMS_final (3ssl) - finalise a CMS_ContentInfo structure
CMS_get1_ReceiptRequest (3ssl) - CMS signed receipt request functions.
CMS_ReceiptRequest_create0 (3ssl) - CMS signed receipt request functions.
CMS_ReceiptRequest_get0_values (3ssl) - CMS signed receipt request functions.
CMS_sign (3ssl) - create a CMS SignedData structure
CMS_SignerInfo_sign (3ssl) - add a signer to a CMS_ContentInfo signed data st...
CMS_uncompress (3ssl) - uncompress a CMS CompressedData structure
CMS_verify (3ssl) - verify a CMS SignedData structure
CMSG_FIRSTHDR (3) - access ancillary data
cntlist (5WN) - file listing number of times each tagged sense occurs ...
column (1) - columnate lists
confdb_keys (8) - Overview of keys stored in the Configuration Database
config.guess (1) - guess the build system triplet
Config::Perl::V (3perl) - Structured data retrieval of perl - V output
confmodule (3) - communicate with Debian configuration system FrontEnd.
confstr (3) - get configuration dependent string variables
console_lock (9) - lock the console system for exclusive use.
console_trylock (9) - try to lock the console system for exclusive use.
console_unlock (9) - unlock the console system
constant (3perl) - Perl pragma to declare constants
container_of (9) - cast a member of a structure out to the containing str...
context_range_set (3) - Routines to manipulate SELinux security contexts
corelist (1) - a commandline frontend to Module::CoreList
corosync (8) - The Corosync Cluster Engine.
corosync-cfgtool (8) - An administrative tool for corosync.
corosync-notifyd (8) - Listen for important corosync events and send dbus and...
corosync-pload (8) - Start payload test.
CPAN::Distroprefs (3perl) - - read and match distroprefs
CPAN::FirstTime (3perl) - Utility for CPAN::Config file Initialization
CPAN::Meta (3perl) - the distribution metadata for a CPAN dist
CPAN::Meta::Converter (3perl) - Convert CPAN distribution metadata structures
CPAN::Meta::Feature (3perl) - an optional feature provided by a CPAN distribu...
CPAN::Meta::History (3perl) - history of CPAN Meta Spec changes
CPAN::Meta::Prereqs (3perl) - a set of distribution prerequisites by phase an...
CPAN::Meta::Requirements (3perl) - a set of version requirements for a CPAN dist
CPAN::Meta::Spec (3perl) - specification for CPAN distribution metadata
CPAN::Meta::Validator (3perl) - validate CPAN distribution metadata structures
CPAN::Mirrors (3perl) - Get CPAN mirror information and select a fast one
cpu_load_update (9) - update the rq->cpu_load[] statistics
cpupri_cleanup (9) - clean up the cpupri structure
cpupri_find (9) - find the best (lowest-pri) CPU in the system
cpupri_init (9) - initialize the cpupri structure
CREATE_CAST (7) - define a new cast
CREATE_EXTENSION (7) - install an extension
CREATE_STATISTICS (7) - define extended statistics
createdb (1) - create a new PostgreSQL database
createuser (1) - define a new PostgreSQL user account
crl2pkcs7 (1ssl) - Create a PKCS#7 structure from a CRL and certificates.
Crypt::OpenSSL::Bignum::CTX (3pm) - Perl interface to the OpenSSL BN_CTX stru...
crypto_ablkcipher_reqsize (9) - obtain size of the request data structure
crypto_ablkcipher_reqtfm (9) - obtain cipher handle from request
crypto_aead_reqsize (9) - obtain size of the request data structure
crypto_ahash_digest (9) - calculate message digest for a buffer
crypto_ahash_digestsize (9) - obtain message digest size
crypto_ahash_export (9) - extract current message digest state
crypto_ahash_final (9) - calculate message digest
crypto_ahash_finup (9) - update and finalize message digest
crypto_ahash_import (9) - import message digest state
crypto_ahash_init (9) - (re)initialize message digest handle
crypto_ahash_reqsize (9) - obtain size of the request data structure
crypto_ahash_reqtfm (9) - obtain cipher handle from request
crypto_alloc_shash (9) - allocate message digest handle
CRYPTO_destroy_dynlockid (3ssl) - OpenSSL thread support
crypto_free_shash (9) - zeroize and free the message digest handle
CRYPTO_set_dynlock_destroy_callback (3ssl) - OpenSSL thread support
crypto_shash_descsize (9) - obtain the operational state size
crypto_shash_digest (9) - calculate message digest for buffer
crypto_shash_digestsize (9) - obtain message digest size
crypto_shash_export (9) - extract operational state for message digest
crypto_shash_final (9) - calculate message digest
crypto_shash_finup (9) - calculate message digest of buffer
crypto_shash_import (9) - import operational state
crypto_shash_init (9) - (re)initialize message digest
crypto_shash_setkey (9) - set key for message digest
crypto_shash_update (9) - add data to message digest for processing
crypto_skcipher_reqsize (9) - obtain size of the request data structure
crypto_skcipher_reqtfm (9) - obtain cipher handle from request
ctstat (8) - unified linux network statistics
d2i_509_CRL_fp (3ssl) - PKCS#10 certificate request functions.
d2i_ECPrivate_key (3ssl) - Encode and decode functions for saving and reading...
d2i_ECPrivateKey (3ssl) - Encode and decode functions for saving and reading ...
d2i_X509_CRL (3ssl) - PKCS#10 certificate request functions.
d2i_X509_CRL_bio (3ssl) - PKCS#10 certificate request functions.
d2i_X509_REQ (3ssl) - PKCS#10 certificate request functions.
d2i_X509_REQ_bio (3ssl) - PKCS#10 certificate request functions.
d2i_X509_REQ_fp (3ssl) - PKCS#10 certificate request functions.
d2i_X509_SIG (3ssl) - DigestInfo functions.
d_alloc_pseudo (9) - allocate a dentry (for lookup-less filesystems)
d_hash_and_lookup (9) - hash the qstr then search for a dentry
d_instantiate (9) - fill in inode information for a dentry
d_instantiate_no_diralias (9) - instantiate a non-aliased dentry
d_splice_alias (9) - splice a disconnected dentry into the tree if one exists
daemon (7) - Writing and packaging system daemons
Data::Dump (3pm) - Pretty printing of data structures
Data::Dumper (3perl) - stringified perl data structures, suitable for both pr...
Data::OptList (3pm) - parse and validate simple name/value option pairs
Data::Perl::Collection::Array (3pm) - Wrapping class for Perl's built in arra...
Data::Perl::Collection::Hash (3pm) - Wrapping class for Perl's built in hash ...
Data::Perl::Role::Collection::Array (3pm) - Wrapping class for Perl's built i...
Data::Perl::Role::Collection::Hash (3pm) - Wrapping class for Perl's built in...
Data::Perl::Role::String (3pm) - Wrapping class for Perl scalar strings.
Data::Perl::String (3pm) - Wrapping class for Perl scalar strings.
Data::Perl::String::MooseLike (3pm) - data::Perl::String subclass that simula...
date (1) - print or set the system date and time
Date::Parse (3pm) - Parse date strings into time values
date@ (1) - prints the date on a remote host.
DateTime::Infinite (3pm) - Infinite past and future DateTime objects
DateTime::Locale::Catalog (3pm) - DateTime locale package for "Catalog" - Pro...
DateTime::Locale::st (3pm) - DateTime locale package for "st"
DateTime::Locale::st_LS (3pm) - DateTime locale package for "st_LS"
DateTime::Locale::st_ZA (3pm) - DateTime locale package for "st_ZA"
DateTime::TimeZone::Catalog (3pm) - Provides a list of all valid time zone names
DateTime::TimeZone::Local (3pm) - Determine the local system's time zone
DateTime::TimeZone::Local::Unix (3pm) - Determine the local system's time zon...
DateTime::TimeZone::Local::VMS (3pm) - Determine the local system's time zone...
DateTime::TimeZone::OffsetOnly (3pm) - A DateTime::TimeZone object that just ...
db5.3_load (1) - Load data from standard input
db5.3_recover (1) - Restore the database to a consistent state
db5.3_stat (1) - Display statistics for Berkeley DB environments
db5.3_verify (1) - Verifies the structure databases
dbconfig-generate-include (1) - generate custom format db include files
dbconfig-load-include (1) - parse custom format db config files
DBD::Gofer (3pm) - A stateless-proxy driver for communicating with a remo...
DBD::Gofer::Transport::corostream (3pm) - Async DBD::Gofer stream transport u...
DBD::Gofer::Transport::null (3pm) - DBD::Gofer client transport for testing
DBD::Gofer::Transport::pipeone (3pm) - DBD::Gofer client transport for testing
DBD::Gofer::Transport::stream (3pm) - DBD::Gofer transport for stdio streaming
DBD::Pg (3pm) - PostgreSQL database driver for the DBI module
DBD::Sponge (3pm) - Create a DBI statement handle from Perl data
DBI::Const::GetInfo::ANSI (3pm) - ISO/IEC SQL/CLI Constants for GetInfo
DBI::Const::GetInfo::ODBC (3pm) - ODBC Constants for GetInfo
DBI::Const::GetInfoReturn (3pm) - Data and functions for describing GetInfo r...
DBI::Const::GetInfoType (3pm) - Data describing GetInfo type codes
DBI::FAQ (3pm) - - The Frequently Asked Questions for the Perl5 Databas...
DBI::Gofer::Execute (3pm) - Executes Gofer requests and returns Gofer responses
DBI::Gofer::Request (3pm) - Encapsulate a request from DBD::Gofer to DBI::Gof...
DBI::Gofer::Serializer::Storable (3pm) - Gofer serialization using Storable
DBI::Gofer::Transport::stream (3pm) - DBD::Gofer server-side transport for st...
DBI::Util::CacheMemory (3pm) - a very fast but very minimal subset of Cache::...
dbilogstrip (1p) - filter to normalize DBI trace logs for diff'ing
dblink_build_sql_delete (3) - builds a DELETE statement using supplied values...
dblink_build_sql_insert (3) - builds an INSERT statement using a local tuple,...
dblink_build_sql_update (3) - builds an UPDATE statement using a local tuple,...
dblink_connect (3) - opens a persistent connection to a remote database
dblink_connect_u (3) - opens a persistent connection to a remote database, in...
dblink_disconnect (3) - closes a persistent connection to a remote database
dblink_error_message (3) - gets last error message on the named connection
dbus-launch (1) - Utility to start a message bus from a shell script
dbus-run-session (1) - start a process as a new D-Bus session
DEALLOCATE (7) - deallocate a prepared statement
deb-control (5) - Debian packages' master control file format
deb-old (5) - old style Debian binary package format
deb-src-control (5) - Debian source packages' master control file format
deb-substvars (5) - Debian source substitution variables
deb-systemd-helper (1p) - subset of systemctl for machines not running systemd
deb-systemd-invoke (1p) - wrapper around systemctl, respecting policy-rc.d
debconf (7) - Debian package configuration system
debconf-apt-progress (1) - install packages using debconf to display a progre...
debootstrap (8) - Bootstrap a basic Debian system
debug_object_active_state (9) - debug checks object usage state machine
debug_object_destroy (9) - debug checks when an object is destroyed
debug_object_init_on_stack (9) - debug checks when an object on stack is init...
debugfs (8) - ext2/ext3/ext4 file system debugger
debugfs_create_automount (9) - create automount point in the debugfs filesystem
debugfs_create_dir (9) - create a directory in the debugfs filesystem
debugfs_create_file (9) - create a file in the debugfs filesystem
debugfs_create_file_size (9) - create a file in the debugfs filesystem
debugfs_create_file_unsafe (9) - create a file in the debugfs filesystem
debugfs_create_regset32 (9) - create a debugfs file that returns register values
debugfs_create_symlink (9) - create a symbolic link in the debugfs filesystem
debugfs_initialized (9) - Tells whether debugfs has been registered
debugfs_print_regs32 (9) - use seq_print to describe a set of registers
debugfs_remove (9) - removes a file or directory from the debugfs filesystem
debugfs_rename (9) - rename a file/directory in the debugfs filesystem
debugfs_use_file_start (9) - mark the beginning of file data access
debugreiserfs (8) - The debugging tool for the ReiserFS filesystem.
DECLARE_COMPLETION (9) - declare and initialize a completion structure
DECLARE_COMPLETION_ONSTACK (9) - declare and initialize a completion structure
defer (8postfix) - Postfix delivery status reports
delgroup (8) - remove a user or group from the system
deluser (8) - remove a user or group from the system
des_crypt (3) - fast DES encryption
DES_FAILED (3) - fast DES encryption
des_read_pw_string (3ssl) - Compatibility user interface functions
des_setparity (3) - fast DES encryption
DES_string_to_2keys (3ssl) - DES encryption
DES_string_to_key (3ssl) - DES encryption
destroy_rcu_head_on_stack (9) - destroy on-stack rcu_head for debugobjects
destroy_workqueue (9) - safely terminate a workqueue
dev_add_offload (9) - register offload handlers
dev_change_net_namespace (9) - move device to different nethost namespace
dev_change_proto_down (9) - update protocol port state information
dev_driver_string (9) - Return a device's driver name, if at all possible
dev_fill_metadata_dst (9) - Retrieve tunnel egress information.
dev_get_stats (9) - get network device statistics
Devel::GlobalDestruction (3pm) - Provides function returning the equivalent o...
Devel::PartialDump (3pm) - Partial dumping of data structures, optimized for ...
Devel::SelfStubber (3perl) - generate stubs for a SelfLoading module
Devel::StackTrace (3pm) - An object representing a stack trace
Devel::StackTrace::Frame (3pm) - A single frame in a stack trace
device_add_disk (9) - add partitioning information to kernel list
device_create (9) - creates a device and registers it with sysfs
device_create_vargs (9) - creates a device and registers it with sysfs
device_create_with_groups (9) - creates a device and registers it with sysfs
device_del (9) - delete device from system.
device_destroy (9) - removes a device that was created with device_create
device_initialize (9) - init device structure.
device_register (9) - register a device with the system.
device_unregister (9) - unregister device from system.
devm_add_action (9) - add a custom action to list of managed resources
devm_kasprintf (9) - Allocate resource managed space and format a string in...
devm_kstrdup (9) - Allocate resource managed space and copy an existing s...
devm_kvasprintf (9) - Allocate resource managed space and format a string in...
devm_release_resource (9) - release a previously requested resource
devm_remove_action (9) - removes previously added custom action
devm_request_resource (9) - request and reserve an I/O or memory resource
devm_snd_dmaengine_pcm_register (9) - resource managed dmaengine PCM registra...
devm_snd_soc_register_card (9) - resource managed card registration
devm_snd_soc_register_component (9) - resource managed component registration
devm_snd_soc_register_platform (9) - resource managed platform registration
devm_spi_register_master (9) - register managed SPI master controller
devres_add (9) - Register device resource
devres_destroy (9) - Find a device resource and destroy it
devres_get (9) - Find devres, if non-existent, add one atomically
devres_release (9) - Find a device resource and destroy it, calling release
df (1) - report file system disk space usage
dgst (1ssl) - message digests
dh_auto_install (1) - automatically runs make install or similar
dh_auto_test (1) - automatically runs a package's test suites
dh_autotools-dev_restoreconfig (1) - restore config.sub and config.guess
dh_bash-completion (1) - install bash completions for package
dh_bugfiles (1) - install bug reporting customization files into package...
dh_gconf (1) - install GConf defaults files and register schemas
dh_gencontrol (1) - generate and install control file
DH_get_ex_data (3ssl) - add application specific data to DH structures
DH_get_ex_new_index (3ssl) - add application specific data to DH structures
dh_install (1) - install files into package build directories
dh_installcatalogs (1) - install and register SGML Catalogs
dh_installchangelogs (1) - install changelogs into package build directories
dh_installcron (1) - install cron scripts into etc/cron.*
dh_installdeb (1) - install files into the DEBIAN directory
dh_installdebconf (1) - install files used by debconf in package build direct...
dh_installdirs (1) - create subdirectories in package build directories
dh_installdocs (1) - install documentation into package build directories
dh_installemacsen (1) - register an Emacs add on package
dh_installexamples (1) - install example files into package build directories
dh_installgsettings (1) - install GSettings overrides and set dependencies
dh_installifupdown (1) - install if-up and if-down hooks
dh_installinfo (1) - install info files
dh_installinit (1) - install service init files into package build directories
dh_installlogcheck (1) - install logcheck rulefiles into etc/logcheck/
dh_installlogrotate (1) - install logrotate config files
dh_installman (1) - install man pages into package build directories
dh_installmanpages (1) - old-style man page installer (deprecated)
dh_installmenu (1) - install Debian menu files into package build directories
dh_installmime (1) - install mime files into package build directories
dh_installmodules (1) - register kernel modules
dh_installpam (1) - install pam support files
dh_installppp (1) - install ppp ip-up and ip-down files
dh_installudev (1) - install udev rules files
dh_installwm (1) - register a window manager
dh_installxfonts (1) - register X fonts
dh_installxmlcatalogs (1) - install and register XML catalog files
dh_lintian (1) - install lintian override files into package build dire...
dh_listpackages (1) - list binary packages debhelper will act on
dh_nativejava (1) - compile jar files to native code and register them
dh_phpcomposer (1) - calculates PHP Composer substvars
DH_set_ex_data (3ssl) - add application specific data to DH structures
dh_strip (1) - strip executables, shared libraries, and some static l...
dh_suidregister (1) - suid registration program (deprecated)
dh_testdir (1) - test directory before building Debian package
dh_testroot (1) - ensure that a package is built as root
dh_ucf (1) - register configuration files with ucf
dhclient (8) - Dynamic Host Configuration Protocol Client
dhcp-options (5) - Dynamic Host Configuration Protocol options
splain (1) - produce verbose warning diagnostics
diagnostics (3perl) - produce verbose warning diagnostics
Digest (3perl) - Modules that calculate message digests
Digest::base (3perl) - Digest base class
Digest::file (3perl) - Calculate digests of files
Digest::HMAC (3pm) - Keyed-Hashing for Message Authentication
Digest::HMAC_MD5 (3pm) - Keyed-Hashing for Message Authentication
Digest::HMAC_SHA1 (3pm) - Keyed-Hashing for Message Authentication
Digest::MD5 (3perl) - Perl interface to the MD5 Algorithm
Digest::SHA (3perl) - Perl extension for SHA-1/224/256/384/512
dir (1) - list directory contents
dirfd (3) - get directory stream file descriptor
dirname (1) - strip last component from file name
discard (8postfix) - Postfix discard mail delivery agent
disk_stack_limits (9) - adjust queue limits for stacked drivers
Dist::CheckConflicts (3pm) - declare version conflicts for your dist
dl_iterate_phdr (3) - walk through list of shared objects
dma_buf_attach (9) - Add the device to dma_buf's attachments list; optional...
dma_buf_begin_cpu_access (9) - Must be called before accessing a dma_buf from...
dma_buf_detach (9) - Remove the given attachment from dmabuf's attachments ...
dma_buf_end_cpu_access (9) - Must be called after accessing a dma_buf from th...
dma_buf_export (9) - Creates a new dma_buf, and associates an anon file wit...
dma_buf_get (9) - returns the dma_buf structure related to an fd
dma_buf_kmap (9) - Map a page of the buffer object into kernel address sp...
dma_buf_kmap_atomic (9) - Map a page of the buffer object into kernel address...
dma_buf_map_attachment (9) - Returns the scatterlist table of the attachment;...
dma_buf_unmap_attachment (9) - unmaps and decreases usecount of the buffer;mi...
dma_buf_vmap (9) - Create virtual mapping for the buffer object into kern...
dma_pool_alloc (9) - get a block of consistent memory
dma_pool_create (9) - Creates a pool of consistent memory blocks, for dma.
dma_pool_destroy (9) - destroys a pool of dma memory blocks.
dmam_pool_destroy (9) - Managed dma_pool_destroy
dmi_check_system (9) - check system DMI data
dmi_first_match (9) - find dmi_system_id structure matching system DMI data
dmi_get_system_info (9) - return DMI data value
dmi_match (9) - compare a string to the dmi field (if exists)
dmi_name_in_vendors (9) - Check if string is in the DMI system or board vendo...
dnsblog (8postfix) - Postfix DNS white/blacklist logger
dnsdomainname (1) - show the system's DNS domain name
dnsfilter (1) - reverse-resolves IP addresses, converting them to host...
dnssec-checkds (8) - A DNSSEC delegation consistency checking tool.
dnstrace (1) - dns lookup tool
dnstracesort (1) - dns lookup tool
dnstxt (1) - prints the TXT record of fqdn
do_notify_parent_cldstop (9) - notify parent of stopped/continued state change
do_pata_set_dmamode (9) - Initialize host controller PATA PIO timings
do_signal_stop (9) - handle group stop for SIGSTOP and other stop signals
domainname (1) - show or set the system's NIS/YP domain name
doveadm (1) - Dovecot's administration utility
doveadm-altmove (1) - Move matching mails to the alternative storage (dbox-o...
doveadm-auth (1) - Test authentication for a user
doveadm-instance (1) - Manage the list of running Dovecot instances
doveadm-log (1) - Locate, test or reopen Dovecot's log files
doveadm-mount (1) - Manage the list of mountpoints where mails are stored
doveadm-reload (1) - Dovecot's administration utility
doveadm-search (1) - Show a list of mailbox GUIDs and message UIDs matching...
doveadm-stop (1) - Dovecot's administration utility
dpkg-distaddfile (1) - add entries to debian/files
dpkg-hold (8) - mark packages as `hold' to prevent installation
dpkg-preconfigure (8) - let packages ask questions prior to their installation
dpkg-reconfigure (8) - reconfigure an already installed package
dpkg-shlibdeps (1) - generate shared library substvar dependencies
dpkg-statoverride (8) - override ownership and mode of files
dpkg-unhold (8) - mark held packages for installation
dpkg-vendor (1) - queries information about distribution vendors
Dpkg::Control::Fields (3) - manage (list of official) control fields
Dpkg::Control::FieldsCore (3) - manage (list of official) control fields
Dpkg::Control::Types (3) - export CTRL_* constants
Dpkg::Interface::Storable (3) - common methods related to object serialization
Dpkg::Substvars (3) - handle variable substitution in strings
Dpkg::Version (3) - handling and comparing dpkg-style version numbers
dpm_resume_end (9) - Execute “resume” callbacks and complete system tra...
dpm_resume_start (9) - Execute “noirq” and “early” device callbacks.
dpm_suspend_start (9) - Prepare devices for PM transition and suspend them.
drand48 (3) - generate uniformly distributed pseudo-random numbers
drand48_r (3) - generate uniformly distributed pseudo-random numbers r...
driver_register (9) - register driver with bus
driver_unregister (9) - remove driver from system.
DROP_CAST (7) - remove a cast
DROP_STATISTICS (7) - remove extended statistics
dropdb (1) - remove a PostgreSQL database
dropuser (1) - remove a PostgreSQL user account
DSA_dup_DH (3ssl) - create a DH structure out of DSA structure
DSA_get_ex_data (3ssl) - add application specific data to DSA structures
DSA_get_ex_new_index (3ssl) - add application specific data to DSA structures
DSA_set_ex_data (3ssl) - add application specific data to DSA structures
dss1 (1ssl) - message digests
du (1) - estimate file space usage
dumpe2fs (8) - dump ext2/ext3/ext4 filesystem information
dwww-build (8) - build dwww index lists
dwww-index++ (8) - build index of registered Debian documentation.
e2fsck (8) - check a Linux ext2/ext3/ext4 file system
e2image (8) - Save critical ext2/ext3/ext4 filesystem metadata to a ...
e2label (8) - Change the label on an ext2/ext3/ext4 filesystem
e2undo (8) - Replay an undo log for an ext2/ext3/ext4 filesystem
e4defrag (8) - online defragmenter for ext4 filesystem
ecb_crypt (3) - fast DES encryption
ecvt (3) - convert a floating-point number to a string
ecvt_r (3) - convert a floating-point number to a string
edd_release (9) - free edd structure
Encode::CJKConstants (3perl) - - Internally used by Encode::??::ISO_2022_*
Encode::GSM0338 (3perl) - - ESTI GSM 03.38 Encoding
end_page_writeback (9) - end writeback against a page
endfsent (3) - handle fstab entries
endhostent (3) - get network host entry
endian (3) - convert values between host and big-/little-endian byt...
endmntent (3) - get filesystem descriptor file entry
enum_ieee80211_sta_info_flags (9) - Stations flags
enum_mac80211_tx_info_flags (9) - flags to describe transmission information/...
enum_netdev_priv_flags (9) - struct net_device priv_flags
enum_sta_notify_cmd (9) - sta notify command
enum_w1_cn_msg_flags (9) - bitfield flags for struct cn_msg.flags
enum_w1_commands (9) - commands available for master or slave operations
enum_w1_master_flags (9) - bitfields used in w1_master.flags
enum_wimax_st (9) - The different states of a WiMAX device
envsubst (1) - substitutes environment variables in shell format strings
envz (3) - environment string support
envz_add (3) - environment string support
envz_entry (3) - environment string support
envz_get (3) - environment string support
envz_merge (3) - environment string support
envz_remove (3) - environment string support
envz_strip (3) - environment string support
erand48 (3) - generate uniformly distributed pseudo-random numbers
erand48_r (3) - generate uniformly distributed pseudo-random numbers r...
ERR_error_string (3ssl) - obtain human-readable error message
ERR_error_string_n (3ssl) - obtain human-readable error message
ERR_free_strings (3ssl) - load and free error strings
ERR_func_error_string (3ssl) - obtain human-readable error message
ERR_get_next_error_library (3ssl) - load arbitrary error strings
ERR_lib_error_string (3ssl) - obtain human-readable error message
ERR_load_crypto_strings (3ssl) - load and free error strings
ERR_load_strings (3ssl) - load arbitrary error strings
ERR_load_UI_strings (3ssl) - New User Interface
ERR_PACK (3ssl) - load arbitrary error strings
ERR_peek_last_error (3ssl) - obtain error code and data
ERR_peek_last_error_line (3ssl) - obtain error code and data
ERR_peek_last_error_line_data (3ssl) - obtain error code and data
ERR_reason_error_string (3ssl) - obtain human-readable error message
ERR_remove_state (3ssl) - free a thread's error queue
errno (3) - number of last error
error (8postfix) - Postfix error/retry mail delivery agent
Error::TypeTiny::Assertion (3pm) - exception when a value fails a type constr...
errstr (1ssl) - lookup error codes
estcall (1) - command line interface of the node API
estcmd (1) - command line interface of the core API
estfxasis (1) - hyperestraier filter programs
estfxfilter (1) - hyperestraier filter programs
estfxmantotxt (1) - hyperestraier filter programs
estfxmsotohtml (1) - hyperestraier filter programs
estfxpdftohtml (1) - hyperestraier filter programs
estload (1) - stresser for web applications
estmaster (1) - master process of node servers
estwaver (1) - command line interface of web crawler
estwaver (3) - command line interface of web crawler
estwolefind (1) - listing WWWOFFLE cache for hyper estraier
eth_broadcast_addr (9) - Assign broadcast address
ether_hostton (3) - Ethernet address manipulation routines
ether_ntohost (3) - Ethernet address manipulation routines
Eval::Closure (3pm) - safely and cleanly create closures via string eval
Eval::TypeTiny (3pm) - utility to evaluate a string of Perl code in a clean e...
EVP_BytesToKey (3ssl) - password based encryption routine
EVP_DigestFinal_ex (3ssl) - EVP digest routines
EVP_DigestInit (3ssl) - EVP digest routines
EVP_DigestInit_ex (3ssl) - EVP digest routines
EVP_DigestSignFinal (3ssl) - EVP signing functions
EVP_DigestSignInit (3ssl) - EVP signing functions
EVP_DigestSignUpdate (3ssl) - EVP signing functions
EVP_DigestUpdate (3ssl) - EVP digest routines
EVP_DigestVerifyFinal (3ssl) - EVP signature verification functions
EVP_DigestVerifyInit (3ssl) - EVP signature verification functions
EVP_DigestVerifyUpdate (3ssl) - EVP signature verification functions
EVP_dss (3ssl) - EVP digest routines
EVP_dss1 (3ssl) - EVP digest routines
EVP_get_digestbyname (3ssl) - EVP digest routines
EVP_get_digestbynid (3ssl) - EVP digest routines
EVP_get_digestbyobj (3ssl) - EVP digest routines
EVP_MAX_MD_SIZE (3ssl) - EVP digest routines
EVP_md2 (3ssl) - EVP digest routines
EVP_md5 (3ssl) - EVP digest routines
EVP_MD_block_size (3ssl) - EVP digest routines
EVP_MD_CTX_block_size (3ssl) - EVP digest routines
EVP_MD_CTX_cleanup (3ssl) - EVP digest routines
EVP_MD_CTX_copy (3ssl) - EVP digest routines
EVP_MD_CTX_copy_ex (3ssl) - EVP digest routines
EVP_MD_CTX_create (3ssl) - EVP digest routines
EVP_MD_CTX_destroy (3ssl) - EVP digest routines
EVP_MD_CTX_init (3ssl) - EVP digest routines
EVP_MD_CTX_md (3ssl) - EVP digest routines
EVP_MD_CTX_size (3ssl) - EVP digest routines
EVP_MD_CTX_type (3ssl) - EVP digest routines
EVP_md_null (3ssl) - EVP digest routines
EVP_MD_pkey_type (3ssl) - EVP digest routines
EVP_MD_size (3ssl) - EVP digest routines
EVP_MD_type (3ssl) - EVP digest routines
EVP_mdc2 (3ssl) - EVP digest routines
EVP_PKEY_ctrl_str (3ssl) - algorithm specific control operations
EVP_PKEY_get_default_digest (3ssl) - get default signature digest
EVP_PKEY_get_default_digest_nid (3ssl) - get default signature digest
EVP_ripemd160 (3ssl) - EVP digest routines
EVP_sha (3ssl) - EVP digest routines
EVP_sha1 (3ssl) - EVP digest routines
EVP_sha224 (3ssl) - EVP digest routines
EVP_sha256 (3ssl) - EVP digest routines
EVP_sha384 (3ssl) - EVP digest routines
EVP_sha512 (3ssl) - EVP digest routines
EXECUTE (7) - execute a prepared statement
EXPLAIN (7) - show the execution plan of a statement
ext2 (5) - the second extended file system
ext3 (5) - the second extended file system
ext4 (5) - the fourth extended file system
ExtUtils::Constant (3perl) - generate XS code to import C header constants
ExtUtils::Constant::Base (3perl) - base class for ExtUtils::Constant objects
ExtUtils::Constant::Utils (3perl) - helper functions for ExtUtils::Constant
ExtUtils::Constant::XS (3perl) - generate C code for XS modules' constants.
ExtUtils::Install (3perl) - install files from here to there
ExtUtils::Installed (3perl) - Inventory management of installed modules
ExtUtils::Liblist (3perl) - determine libraries to use and how to use them
ExtUtils::MakeMaker::FAQ (3perl) - Frequently Asked Questions About MakeMaker
ExtUtils::Manifest (3perl) - utilities to write and check a MANIFEST file
ExtUtils::Mkbootstrap (3perl) - make a bootstrap file for use by DynaLoader
ExtUtils::Mksymlists (3perl) - write linker options files for dynamic extension
ExtUtils::MM (3perl) - OS adjusted ExtUtils::MakeMaker subclass
ExtUtils::MM_Any (3perl) - Platform-agnostic MM methods
ExtUtils::MM_Win95 (3perl) - method to customize MakeMaker for Win9X
ExtUtils::MY (3perl) - ExtUtils::MakeMaker subclass for customization
ExtUtils::Packlist (3perl) - manage .packlist files
ExtUtils::ParseXS::Constants (3perl) - Initialization values for some globals
ExtUtils::testlib (3perl) - add blib/* directories to @INC
fail2ban-regex (1) - test Fail2ban "failregex" option
fail2ban-server (1) - start the server
fanotify (7) - monitoring filesystem events
fanotify_mark (2) - add, remove, or modify an fanotify mark on a filesyste...
fattach (2) - unimplemented system calls
fb_add_videomode (9) - adds videomode entry to modelist
fb_delete_videomode (9) - removed videomode entry from modelist
fb_destroy_modelist (9) - destroy modelist
fb_find_best_mode (9) - find best matching videomode
fb_find_nearest_mode (9) - find closest videomode
fb_try_mode (9) - test a video mode
fb_videomode_to_modelist (9) - convert mode array to mode list
fc-list (1) - list available fonts
fc_host_post_event (9) - called to post an even on an fc_host.
fc_host_post_vendor_event (9) - called to post a vendor unique event on an fc...
fc_remote_port_add (9) - notify fc transport of the existence of a remote FC ...
fc_remote_port_delete (9) - notifies the fc transport that a remote port is n...
fc_remove_host (9) - called to terminate any fc_transport-related elements ...
fc_vport_create (9) - Admin App or LLDD requests creation of a vport
fc_vport_terminate (9) - Admin App or LLDD requests termination of a vport
FCGI (3pm) - Fast CGI module
fcgistarter (8) - Start a FastCGI program
fcgiwrap (8) - serve CGI applications over FastCGI
fclose (3) - close a stream
fcloseall (3) - close all open streams
fcvt (3) - convert a floating-point number to a string
fcvt_r (3) - convert a floating-point number to a string
fdatasync (2) - synchronize a file's in-core state with storage device
fdetach (2) - unimplemented system calls
fdopen (3) - stream open functions
feature_test_macros (7) - feature test macros
fence_array_create (9) - Create a custom fence array
fence_get_rcu (9) - get a fence from a reservation_object_list with rcu re...
fence_init (9) - Initialize a custom fence.
fence_remove_callback (9) - remove a callback from the signaling list
feof (3) - check and reset stream status
feof_unlocked (3) - nonlocking stdio functions
ferror (3) - check and reset stream status
ferror_unlocked (3) - nonlocking stdio functions
fetestexcept (3) - floating-point rounding and exception handling
fflush (3) - flush a stream
fflush_unlocked (3) - nonlocking stdio functions
ffs (3) - find first bit set in a word
ffs (9) - find first set bit in word
ffsl (3) - find first bit set in a word
ffsll (3) - find first bit set in a word
ffz (9) - find first zero bit in word
fgetc (3) - input of characters and strings
fgetc_unlocked (3) - nonlocking stdio functions
fgetpos (3) - reposition a stream
fgets (3) - input of characters and strings
fgets_unlocked (3) - nonlocking stdio functions
fgetwc (3) - read a wide character from a FILE stream
fgetwc_unlocked (3) - nonlocking stdio functions
fgetws (3) - read a wide-character string from a FILE stream
fgetws_unlocked (3) - nonlocking stdio functions
fifo (7) - first-in first-out special file, named pipe
file-hierarchy (7) - File system hierarchy overview
File::Listing (3pm) - parse directory listing
File::MimeInfo::Rox (3pm) - Open files by mimetype "Rox style"
File::NCopy (3pm) - Deprecated module. Use File::Copy::Recursive instead. ...
File::stat (3perl) - by-name interface to Perl's built-in stat() functions
FileCache (3perl) - keep more files open than the system permits
filemap_flush (9) - mostly a non-blocking flush
fileno (3) - check and reset stream status
fileno_unlocked (3) - nonlocking stdio functions
filesystems (5) - Linux filesystem types: minix, ext, ext2, ext3, ext4, ...
filetest (3perl) - Perl pragma to control the filetest permission operators
find_busiest_group (9) - Returns the busiest group within the sched_domain if...
find_min_pfn_with_active_regions (9) - Find the minimum PFN registered
find_next_best_node (9) - find the next node that should appear in a given no...
findfs (8) - find a filesystem by label or UUID
findmnt (8) - find a filesystem
findsmb (1) - list info about machines that respond to SMB name quer...
finger@ (1) - gets user information from a remote host.
fix_small_imbalance (9) - Calculate the minor imbalance that exists amongst t...
fixup_owner (9) - Post lock pi_state and corner case management
flock_lock_inode_wait (9) - Apply a FLOCK-style lock to a file
flockfile (3) - lock FILE for stdio
floor (3) - largest integral value not greater than argument
floorf (3) - largest integral value not greater than argument
floorl (3) - largest integral value not greater than argument
fls (9) - find last set bit in word
fls64 (9) - find last set bit in a 64-bit word
flush (8postfix) - Postfix fast flush server
flush_delayed_work (9) - wait for a dwork to finish executing the last queueing
flush_work (9) - wait for a work to finish executing the last queueing ...
fmemopen (3) - open memory as stream
fnmatch (3am) - compare a string against a filename wildcard
fopen (3) - stream open functions
fopencookie (3) - opening a custom stream
fpurge (3) - purge a stream
fputc (3) - output of characters and strings
fputc_unlocked (3) - nonlocking stdio functions
fputs (3) - output of characters and strings
fputs_unlocked (3) - nonlocking stdio functions
fputwc (3) - write a wide character to a FILE stream
fputwc_unlocked (3) - nonlocking stdio functions
fputws (3) - write a wide-character string to a FILE stream
fputws_unlocked (3) - nonlocking stdio functions
fread (3) - binary stream input/output
fread_unlocked (3) - nonlocking stdio functions
free (1) - Display amount of free and used memory in the system
free_dma (9) - free a reserved system DMA channel
free_irq (9) - free an interrupt allocated with request_irq
free_percpu_irq (9) - free an interrupt allocated with request_percpu_irq
free_rs (9) - Free the rs control structure, if it is no longer used
freehostent (3) - get network hostnames and addresses
freeze_bdev (9) - - lock a filesystem and force it into a consistent state
freeze_super (9) - lock the filesystem and force it into a consistent state
freopen (3) - stream open functions
fs (5) - Linux filesystem types: minix, ext, ext2, ext3, ext4, ...
fsadm (8) - utility to resize or check filesystem on a device
fsck (8) - check and repair a Linux filesystem
fsck.cramfs (8) - fsck compressed ROM file system
fsck.ext2 (8) - check a Linux ext2/ext3/ext4 file system
fsck.ext3 (8) - check a Linux ext2/ext3/ext4 file system
fsck.ext4 (8) - check a Linux ext2/ext3/ext4 file system
fsck.ext4dev (8) - check a Linux ext2/ext3/ext4 file system
fsck.minix (8) - check consistency of Minix filesystem
fsck.reiserfs (8) - The checking tool for the ReiserFS filesystem.
fseek (3) - reposition a stream
fsetpos (3) - reposition a stream
fsfreeze (8) - suspend access to a filesystem (Ext3/4, ReiserFS, JFS,...
fstab (5) - static information about the filesystems
fstab-decode (8) - run a command with fstab-encoded arguments
fstat (2) - get file status
fstat64 (2) - get file status
fstatat (2) - get file status
fstatat64 (2) - get file status
fstatfs (2) - get filesystem statistics
fstatfs64 (2) - get filesystem statistics
fstatvfs (2) - get filesystem statistics
fstatvfs (3) - get filesystem statistics
fstrim (8) - discard unused blocks on a mounted filesystem
fsync (2) - synchronize a file's in-core state with storage device
ftell (3) - reposition a stream
ftm (7) - feature test macros
ftok (3) - convert a pathname and a project identifier to a Syste...
ftrylockfile (3) - lock FILE for stdio
funlockfile (3) - lock FILE for stdio
futex (2) - fast user-space locking
futex (7) - fast user-space locking
futex_top_waiter (9) - Return the highest priority waiter on a futex
futimens (3) - change file timestamps with nanosecond precision
futimes (3) - change file timestamps
futimesat (2) - change timestamps of a file relative to a directory fi...
fwide (3) - set and determine the orientation of a FILE stream
fwrite (3) - binary stream input/output
fwrite_unlocked (3) - nonlocking stdio functions
gadget_is_stall_supported (9) - return true iff the hardware supports stalling
gai_strerror (3) - network address and service translation
gcvt (3) - convert a floating-point number to a string
gen_estimator_active (9) - test if estimator is currently in use
gen_kill_estimator (9) - remove a rate estimator
gen_new_estimator (9) - create a new rate estimator
gen_replace_estimator (9) - replace rate estimator configuration
generic (5) - Postfix generic table format
generic_file_read_iter (9) - generic filesystem read routine
generic_make_request (9) - hand a buffer to its device driver for I/O
generic_permission (9) - check for access rights on a Posix-like filesystem
generic_pipe_buf_get (9) - get a reference to a struct pipe_buffer
generic_pipe_buf_release (9) - put a reference to a struct pipe_buffer
generic_pipe_buf_steal (9) - attempt to take ownership of a pipe_buffer
generic_writepages (9) - walk the list of dirty pages of the given address sp...
genphy_aneg_done (9) - return auto-negotiation status
genphy_config_aneg (9) - restart auto-negotiation or write BMCR
genphy_read_status (9) - check the link status and update current link state
genphy_restart_aneg (9) - Enable and Restart Autonegotiation
genphy_update_link (9) - update link status in phydev
Geo::Mirror (3pm) - Find closest Mirror
geoiplookup (1) - look up country using IP Address or hostname
geoiplookup6 (1) - look up country using IP Address or hostname
get_option (9) - Parse integer from an option string
get_options (9) - Parse a string into a list of integers
get_ordered_context_list (3) - determine SELinux context(s) for user sessions
get_ordered_context_list_with_level (3) - determine SELinux context(s) for us...
get_pfn_range_for_nid (9) - Return the start and end page frames for a node
get_phy_device (9) - reads the specified PHY device and returns its phy_dev...
get_request (9) - get a free request
get_robust_list (2) - get/set list of robust futexes
get_state_synchronize_rcu (9) - Snapshot current RCU state
get_state_synchronize_sched (9) - Snapshot current RCU-sched state
get_thread_area (2) - get a thread-local storage (TLS) area
get_user_pages_fast (9) - pin user pages in memory
getc (3) - input of characters and strings
getc_unlocked (3) - nonlocking stdio functions
getchar (3) - input of characters and strings
getchar_unlocked (3) - nonlocking stdio functions
getconf (1) - Query system configuration variables
getdate (3) - convert a date-plus-time string to broken-down time
getdate_err (3) - convert a date-plus-time string to broken-down time
getdate_r (3) - convert a date-plus-time string to broken-down time
getdelim (3) - delimited string input
getdirentries (3) - get directory entries in a filesystem-independent format
getfacl (1) - get file access control lists
getfscreatecon (3) - get or set the SELinux security context used for creat...
getfscreatecon_raw (3) - get or set the SELinux security context used for cre...
getfsent (3) - handle fstab entries
getfsfile (3) - handle fstab entries
getfsspec (3) - handle fstab entries
getgrouplist (3) - get list of groups to which a user belongs
getgroups (2) - get/set list of supplementary group IDs
getgroups32 (2) - get/set list of supplementary group IDs
gethostbyaddr (3) - get network host entry
gethostbyaddr_r (3) - get network host entry
gethostbyname (3) - get network host entry
gethostbyname2 (3) - get network host entry
gethostbyname2_r (3) - get network host entry
gethostbyname_r (3) - get network host entry
gethostent (3) - get network host entry
gethostent_r (3) - get network host entry
gethostid (2) - get or set the unique identifier of the current host
gethostid (3) - get or set the unique identifier of the current host
gethostname (2) - get/set hostname
GetIocFacts (9) - Send IOCFacts request to MPT adapter.
getipnodebyaddr (3) - get network hostnames and addresses
getipnodebyname (3) - get network hostnames and addresses
getline (3) - delimited string input
getloadavg (3) - get system load averages
getmntent (3) - get filesystem descriptor file entry
getmntent_r (3) - get filesystem descriptor file entry
getmsg (2) - unimplemented system calls
Getopt::Std (3perl) - Process single-character switches with switch clustering
getpcaps (1) - List Process Capabilities
getpmsg (2) - unimplemented system calls
GetPortFacts (9) - Send PortFacts request to MPT adapter.
getpt (3) - open the pseudoterminal master (PTM)
getpw (3) - reconstruct password line entry
gets (3) - get a string from standard input (DEPRECATED)
getsubopt (3) - parse suboption arguments from a string
gettextize (1) - install or upgrade gettext infrastructure
getutmp (3) - copy utmp structure to utmpx, and vice versa
getutmpx (3) - copy utmp structure to utmpx, and vice versa
getwc (3) - read a wide character from a FILE stream
getwc_unlocked (3) - nonlocking stdio functions
getwchar (3) - read a wide character from standard input
getwchar_unlocked (3) - nonlocking stdio functions
git (1) - the stupid content tracker
git-blame (1) - Show what revision and author last modified each line ...
git-branch (1) - List, create, or delete branches
git-cherry (1) - Find commits yet to be applied to upstream
git-cherry-pick (1) - Apply the changes introduced by some existing commits
git-credential (1) - Retrieve and store user credentials
git-credential-cache (1) - Helper to temporarily store passwords in memory
git-credential-cache--daemon (1) - Temporarily store user credentials in memory
git-credential-store (1) - Helper to store credentials on disk
git-describe (1) - Show the most recent tag that is reachable from a commit
git-fast-export (1) - Git data exporter
git-fast-import (1) - Backend for fast Git data importers
git-imap-send (1) - Send a collection of patches from stdin to an IMAP folder
git-index-pack (1) - Build pack index file for an existing packed archive
git-init (1) - Create an empty Git repository or reinitialize an exis...
git-instaweb (1) - Instantly browse your working repository in gitweb
git-ls-remote (1) - List references in a remote repository
git-ls-tree (1) - List the contents of a tree object
git-merge (1) - Join two or more development histories together
git-merge-base (1) - Find as good common ancestors as possible for a merge
git-merge-one-file (1) - The standard helper program to use with git-merge-index
git-rebase (1) - Forward-port local commits to the updated upstream head
git-remote-fd (1) - Reflect smart transport stream back to caller
git-remote-testgit (1) - Example remote-helper
git-replace (1) - Create, list, delete refs to replace objects
git-request-pull (1) - Generates a summary of pending changes
git-reset (1) - Reset current HEAD to the specified state
git-rev-list (1) - Lists commit objects in reverse chronological order
git-revert (1) - Revert some existing commits
git-sh-i18n--envsubst (1) - Git's own envsubst(1) for i18n fallbacks
git-shell (1) - Restricted login shell for Git-only SSH access
git-show-ref (1) - List references in a local repository
git-stage (1) - Add file contents to the staging area
git-stash (1) - Stash the changes in a dirty working directory away
git-status (1) - Show the working tree status
git-stripspace (1) - Remove unnecessary whitespace
git-tag (1) - Create, list, delete or verify a tag object signed wit...
git-update-index (1) - Register file contents in the working tree to the index
git-update-ref (1) - Update the object name stored in a ref safely
glibc (7) - overview of standard C libraries on Linux
gnet_stats_copy_app (9) - copy application specific statistics into statistic...
gnet_stats_copy_basic (9) - copy basic statistics into statistic TLV
gnet_stats_copy_queue (9) - copy queue statistics into statistics TLV
gnet_stats_copy_rate_est (9) - copy rate estimator statistics into statistics...
gnet_stats_finish_copy (9) - finish dumping procedure
gnet_stats_start_copy (9) - start dumping procedure in compatibility mode
gnet_stats_start_copy_compat (9) - start dumping procedure in compatibility mode
goaccess (1) - fast web log analyzer and interactive viewer.
gorbd-4.9 (1) - - An object request broker daemon
gpasswd (1) - administer /etc/group and /etc/gshadow
gradm2 (8) - Administration program for the grsecurity RBAC system
grep-status (1) - grep Debian control files
grlearn (8) - Automatic learning daemon for grsecurity RBAC system
grmid-4.9 (1) - - RMI activation system daemon
grmiregistry-4.9 (1) - - Remote object registry
groff (1) - front-end for the groff document formatting system
grops (1) - PostScript driver for groff
group_member (3) - test whether a process is in a group
groupmod (8) - modify a group definition on the system
grub-fstest (1) - debug tool for GRUB filesystem drivers
grub-install (8) - install GRUB to a device
grub-menulst2cfg (1) - transform legacy menu.lst into grub.cfg
grub-mkrelpath (1) - make a system path relative to its root
grub-mkstandalone (1) - make a memdisk-based GRUB image
grub-mount (1) - export GRUB filesystem with FUSE
gtk-options (7) - Standard Command Line Options for GTK+ Programs
gtk-query-immodules-2.0 (1) - Input method module registration utility
gtty (2) - unimplemented system calls
h_errno (3) - get network host entry
handle_fasteoi_irq (9) - irq handler for transparent controllers
hasmntopt (3) - get filesystem descriptor file entry
hcd_buffer_destroy (9) - deallocate buffer pools
hdestroy (3) - hash table management
hdestroy_r (3) - hash table management
head (1) - output the first part of files
header_checks (5) - Postfix built-in content inspection
herror (3) - get network host entry
hg (1) - Mercurial source code management system
hg-ssh (8) - restricted ssh login shell for Mercurial
hier (7) - description of the filesystem hierarchy
history (3readline) - GNU History Library
hlist_for_each_entry (9) - iterate over list of given type
hlist_for_each_entry_continue (9) - iterate over a hlist continuing after cur...
hlist_for_each_entry_from (9) - iterate over a hlist continuing from current ...
hlist_for_each_entry_safe (9) - iterate over list of given type safe against ...
host (1) - DNS lookup utility
host.conf (5) - resolver configuration file
hostid (1) - print the numeric identifier for the current host
hostname (1) - show or set the system's host name
hostname (5) - Local hostname configuration file
hostname (7) - hostname resolution description
hostnamectl (1) - Control the system hostname
hosts (5) - static table lookup for hostnames
hosts.allow (5) - format of host access control files
hosts.deny (5) - format of host access control files
hosts_access (5) - format of host access control files
hosts_options (5) - host access control language extensions
hrtimer_start (9) - (re)start an hrtimer on the current CPU
hrtimer_start_range_ns (9) - (re)start an hrtimer on the current CPU
hsi_port_unregister_clients (9) - Unregister an HSI port
hsi_register_client_driver (9) - Register an HSI client to the HSI bus
hsi_register_controller (9) - Register an HSI controller and its ports
hsi_register_port_event (9) - Register a client to receive port events
hsi_start_tx (9) - Signal the port that the client wants to start a TX
hsi_stop_tx (9) - Signal the port that the client no longer wants to tra...
hsi_unregister_controller (9) - Unregister an HSI controller
hsi_unregister_port_event (9) - Stop receiving port events for a client
hstrerror (3) - get network host entry
ht_destroy_irq (9) - destroy an irq created with ht_create_irq
htdigest (1) - manage user files for digest authentication
HTML::AsSubs (3pm) - functions that construct a HTML syntax tree
HTML::Entities (3pm) - Encode or decode strings with HTML entities
HTML::FormatPS (3pm) - Format HTML as PostScript
HTML::Mason (3pm) - High-performance, dynamic web site authoring system
HTML::Mason::Admin (3pm) - Mason Administrator's Manual
HTML::Mason::FAQ (3pm) - Frequently asked questions
HTML::Mason::Request (3pm) - Mason Request Class
HTML::Mason::Tests (3pm) - Test harness for testing Mason
HTML::Template::FAQ (3pm) - Frequently Asked Questions about HTML::Template
HTML::Tree::AboutTrees (3pm) - - article on tree-shaped data structures in Perl
htobe16 (3) - convert values between host and big-/little-endian byt...
htobe32 (3) - convert values between host and big-/little-endian byt...
htobe64 (3) - convert values between host and big-/little-endian byt...
htole16 (3) - convert values between host and big-/little-endian byt...
htole32 (3) - convert values between host and big-/little-endian byt...
htole64 (3) - convert values between host and big-/little-endian byt...
htonl (3) - convert values between host and network byte order
htons (3) - convert values between host and network byte order
HTTP::Config (3pm) - Configuration for request and response objects
HTTP::Message (3pm) - HTTP style message (base class)
HTTP::Parser (3pm) - parse HTTP/1.1 request into HTTP::Request/Response object
HTTP::Request (3pm) - HTTP style request message
HTTP::Request::Common (3pm) - Construct common HTTP::Request objects
HTTP::Response (3pm) - HTTP style response message
HTTP::Server::Simple::CGI (3pm) - CGI.pm-style version of HTTP::Server::Simple
HTTP::Server::Simple::Mason (3pm) - An abstract baseclass for a standalone ma...
HTTP::Status (3pm) - HTTP Status code processing
http@ (1) - gets a web page from a remote host.
HUGE_VAL (3) - floating-point constants
HUGE_VALF (3) - floating-point constants
HUGE_VALL (3) - floating-point constants
hypot (3) - Euclidean distance function
hypotf (3) - Euclidean distance function
hypotl (3) - Euclidean distance function
I18N::LangTags (3perl) - functions for dealing with RFC3066-style language tags
I18N::LangTags::List (3perl) - - tags and names for human languages
i2c_add_numbered_adapter (9) - declare i2c adapter, use static bus number
I2C_BOARD_INFO (9) - macro used to list an i2c device and its address
i2c_del_adapter (9) - unregister I2C adapter
i2c_del_driver (9) - unregister I2C driver
i2c_master_recv (9) - issue a single I2C message in master receive mode
i2c_master_send (9) - issue a single I2C message in master transmit mode
i2c_new_device (9) - instantiate an i2c device
i2c_new_secondary_device (9) - Helper to get the instantiated secondary addre...
i2c_register_board_info (9) - statically declare I2C devices
i2c_release_client (9) - release a use of the i2c client structure
i2c_unregister_device (9) - reverse effect of i2c_new_device
i2c_use_client (9) - increments the reference count of the i2c client struc...
i2d_CMS_bio_stream (3ssl) - output CMS_ContentInfo structure in BER format.
i2d_ECPrivateKey (3ssl) - Encode and decode functions for saving and reading ...
i2d_PKCS7_bio_stream (3ssl) - output PKCS7 structure in BER format.
i2d_X509_CRL (3ssl) - PKCS#10 certificate request functions.
i2d_X509_CRL_bio (3ssl) - PKCS#10 certificate request functions.
i2d_X509_CRL_fp (3ssl) - PKCS#10 certificate request functions.
i2d_X509_REQ (3ssl) - PKCS#10 certificate request functions.
i2d_X509_REQ_bio (3ssl) - PKCS#10 certificate request functions.
i2d_X509_REQ_fp (3ssl) - PKCS#10 certificate request functions.
i2d_X509_SIG (3ssl) - DigestInfo functions.
ich_pata_cable_detect (9) - Probe host controller cable detect info
ich_set_dmamode (9) - Initialize host controller PATA DMA timings
ida_destroy (9) - release all cached layers within an ida tree
ida_get_new_above (9) - allocate new ID above or equal to a start id
idr_destroy (9) - release all cached layers within an idr tree
idr_for_each (9) - iterate through all stored pointers
ieee80211_ctstoself_duration (9) - Get the duration field for a CTS-to-self f...
ieee80211_ctstoself_get (9) - CTS-to-self frame generation function
ieee80211_find_sta (9) - find a station
ieee80211_find_sta_by_ifaddr (9) - find a station on hardware
ieee80211_get_buffered_bc (9) - accessing buffered broadcast and multicast fr...
ieee80211_get_channel (9) - get channel struct from wiphy for specified frequ...
ieee80211_queue_stopped (9) - test status of the queue
ieee80211_register_hw (9) - Register hardware device
ieee80211_request_smps (9) - request SM PS transition
ieee80211_sta_block_awake (9) - block station from waking up
ieee80211_sta_eosp (9) - notify mac80211 about end of SP
ieee80211_sta_ps_transition (9) - PS transition for connected sta
ieee80211_sta_ps_transition_ni (9) - PS transition for connected sta (in proc...
ieee80211_sta_set_buffered (9) - inform mac80211 about driver-buffered frames
ieee80211_start_tx_ba_cb_irqsafe (9) - low level driver ready to aggregate.
ieee80211_start_tx_ba_session (9) - Start a tx Block Ack session.
ieee80211_stop_queue (9) - stop specific queue
ieee80211_stop_queues (9) - stop all queues
ieee80211_stop_tx_ba_cb_irqsafe (9) - low level driver ready to stop aggregate.
ieee80211_stop_tx_ba_session (9) - Stop a Block Ack session.
ieee80211_tx_info_clear_status (9) - clear TX status
ieee80211_tx_status (9) - transmit status callback
ieee80211_tx_status_irqsafe (9) - IRQ-safe transmit status callback
ieee80211_tx_status_ni (9) - transmit status callback (in process context)
ieee80211_unregister_hw (9) - Unregister a hardware device
iget5_locked (9) - obtain an inode from a mounted file system
iget_failed (9) - Mark an under-construction inode as dead and release it
iget_locked (9) - obtain an inode from a mounted file system
iio_device_register (9) - register a device with the IIO subsystem
iio_device_unregister (9) - unregister a device from the IIO subsystem
inc::latest (3perl) - use modules bundled in inc/ if they are newer than ins...
index (3) - locate character in string
INFINITY (3) - floating-point constants
init (1) - systemd system and service manager
init_rcu_head_on_stack (9) - initialize on-stack rcu_head for debugobjects
init_rs (9) - Find a matching or allocate a new rs control structure
init_rs_non_canonical (9) - Find a matching or allocate a new rs control stru...
init_srcu_struct (9) - initialize a sleep-RCU structure
initdb (1) - create a new PostgreSQL database cluster
initgroups (3) - initialize the supplementary group access list
initstate (3) - random number generator
initstate_r (3) - reentrant random number generator
innotop (1) - MySQL and InnoDB transaction/status monitor.
inode_congested (9) - test whether an inode is congested
inode_dio_wait (9) - wait for outstanding DIO requests to finish
inode_init_always (9) - perform inode structure intialisation
inode_init_owner (9) - Init uid, gid, mode for new inode according to posix s...
inode_sb_list_add (9) - add inode to the superblock list of inodes
inotify (7) - monitoring filesystem events
inotify_add_watch (2) - add a watch to an initialized inotify instance
inotify_init (2) - initialize an inotify instance
inotify_init1 (2) - initialize an inotify instance
inotify_rm_watch (2) - remove an existing watch from an inotify instance
inotifywatch (1) - gather filesystem access statistics using inotify
input_alloc_absinfo (9) - allocates array of input_absinfo structs
input_ff_destroy (9) - frees force feedback portion of input device
input_free_device (9) - free memory occupied by input_dev structure
input_mt_assign_slots (9) - perform a best-match assignment
input_mt_destroy_slots (9) - frees the MT slots of the input device
input_mt_report_slot_state (9) - report contact state
input_register_device (9) - register device with input core
input_register_handle (9) - register a new input handle
input_register_handler (9) - register a new input handler
input_register_polled_device (9) - register polled device
input_reset_device (9) - reset/restore the state of input device
input_scancode_to_scalar (9) - converts scancode in struct input_keymap_entry
input_unregister_device (9) - unregister previously registered device
input_unregister_handle (9) - unregister an input handle
input_unregister_handler (9) - unregisters an input handler
input_unregister_polled_device (9) - unregister polled device
install (1) - copy files and set attributes
install-docs (8) - manage online Debian documentation
install-sgmlcatalog (8) - maintain transitional SGML catalog
installkernel (8) - install a new kernel image
instmodsh (1) - A shell to examine installed modules
integer (3perl) - Perl pragma to use integer arithmetic instead of float...
intro (2) - introduction to system calls
intro (8) - introduction to administration and privileged commands
invoke-rc.d (8) - executes System-V style init script actions
IO::Stringy (3pm) - I/O on in-core objects like strings and arrays
IO::Compress::FAQ (3perl) - - Frequently Asked Questions about IO::Compress
IO::Poll (3perl) - Object interface to system poll call
IO::Select (3perl) - OO interface to the select system call
IO::Socket::SSL::PublicSuffix (3pm) - provide access to Mozillas list of effe...
IO::Socket::SSL::Utils (3pm) - - loading, storing, creating certificates and ...
IO::Tty (3pm) - Low-level allocate a pseudo-Tty, import constants.
IO::Tty::Constant (3pm) - Terminal Constants (autogenerated)
IO::Zlib (3perl) - IO:: style interface to Compress::Zlib
io_cancel (2) - cancel an outstanding asynchronous I/O operation
io_destroy (2) - destroy an asynchronous I/O context
ioctl_list (2) - list of ioctl calls in Linux/i386 kernel
iostat (1) - Report Central Processing Unit (CPU) statistics and in...
ip-l2tp (8) - L2TPv3 static unmanaged tunnel configuration
ip-maddress (8) - multicast addresses management
ip-monitor (8) - state monitoring
ip-mroute (8) - multicast routing cache management
ip6tables (8) - administration tool for IPv4/IPv6 packet filtering and...
ip6tables-restore (8) - Restore IPv6 Tables
ip6tables-save (8) - dump iptables rules to stdout
ipc (2) - System V IPC system calls
ipc (5) - System V interprocess communication mechanisms
IPC::Cmd (3perl) - finding and running system commands made easy
IPC::Run (3pm) - system() and background procs w/ piping, redirs, ptys ...
IPC::System::Simple (3pm) - Run commands simply, with detailed diagnostics
IPC::SysV (3perl) - System V IPC constants and system calls
ipc_get_maxid (9) - get the last assigned id
ipc_init (9) - initialise ipc subsystem
ipc_lock (9) - lock an ipc structure without rwsem held
iptables (8) - administration tool for IPv4/IPv6 packet filtering and...
iptables-extensions (8) - list of extensions in the standard iptables distrib...
iptables-restore (8) - Restore IP Tables
iptables-save (8) - dump iptables rules to stdout
irq_gc_mask_clr_bit (9) - Mask chip via clearing bit in mask register
irq_gc_mask_set_bit (9) - Mask chip via setting bit in mask register
irq_get_irqchip_state (9) - returns the irqchip state of a interrupt.
irq_set_irqchip_state (9) - set the state of a forwarded interrupt.
irqbalance (1) - distribute hardware interrupts across processors on a ...
iruserok (3) - routines for returning a stream to a remote command
iruserok_af (3) - routines for returning a stream to a remote command
is_broadcast_ether_addr (9) - Determine if the Ethernet address is broadcast
is_context_customizable (3) - check whether SELinux context type is customiza...
is_global_init (9) - check if a task structure is init. Since init is free ...
is_multicast_ether_addr (9) - Determine if the Ethernet address is a multicast.
is_unicast_ether_addr (9) - Determine if the Ethernet address is unicast
isastream (2) - unimplemented system calls
isatty (3) - test whether a file descriptor refers to a terminal
isc-config.sh (1) - Get information about the installed version of ISC BIND
iscsi_block_scsi_eh (9) - block scsi eh until session state has transistioned
iscsi_destroy_all_flashnode (9) - destroy all flashnode session entries
iscsi_destroy_conn (9) - destroy iscsi class connection
iscsi_destroy_flashnode_sess (9) - destroy flashnode session entry
iscsi_destroy_session (9) - destroy iscsi session
iscsi_session_event (9) - send session destr. completion event
iscsi_unblock_session (9) - set a session as logged in and start IO.
iscsiadm (8) - open-iscsi administration utility
iscsistart (8) - iSCSI boot tool
isfdtype (3) - test file type of a file descriptor
isgreater (3) - floating-point relational tests without exception for NaN
isgreaterequal (3) - floating-point relational tests without exception for NaN
isless (3) - floating-point relational tests without exception for NaN
islessequal (3) - floating-point relational tests without exception for NaN
islessgreater (3) - floating-point relational tests without exception for NaN
isosize (8) - output the length of an iso9660 filesystem
isunordered (3) - floating-point relational tests without exception for NaN
iswalnum (3) - test for alphanumeric wide character
iswalpha (3) - test for alphabetic wide character
iswblank (3) - test for whitespace wide character
iswcntrl (3) - test for control wide character
iswdigit (3) - test for decimal digit wide character
iswgraph (3) - test for graphic wide character
iswlower (3) - test for lowercase wide character
iswprint (3) - test for printing wide character
iswpunct (3) - test for punctuation or symbolic wide character
iswspace (3) - test for whitespace wide character
iswupper (3) - test for uppercase wide character
iswxdigit (3) - test for hexadecimal digit wide character
j0 (3) - Bessel functions of the first kind
j0f (3) - Bessel functions of the first kind
j0l (3) - Bessel functions of the first kind
j1 (3) - Bessel functions of the first kind
j1f (3) - Bessel functions of the first kind
j1l (3) - Bessel functions of the first kind
jbd2__journal_restart (9) - restart a handle .
jbd2__journal_start (9) - Obtain a new handle.
jbd2_journal_clear_err (9) - clears the journal's error state
jbd2_journal_destroy (9) - Release a journal_t structure.
jbd2_journal_errno (9) - returns the journal's error state.
jbd2_journal_force_commit_nested (9) - (unknown subject)
jbd2_journal_init_dev (9) - creates and initialises a journal structure
jbd2_journal_lock_updates (9) - establish a transaction barrier.
jbd2_journal_skip_recovery (9) - Start journal and wipe exiting records
jbd2_journal_start_reserved (9) - start reserved handle
jbd2_journal_stop (9) - complete a transaction
jn (3) - Bessel functions of the first kind
jnf (3) - Bessel functions of the first kind
jnl (3) - Bessel functions of the first kind
journalctl (1) - Query the systemd journal
jrand48 (3) - generate uniformly distributed pseudo-random numbers
jrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
JSON::XS (3pm) - JSON serialising/deserialising, done correctly and fast
kantiword (1) - installs desktop icon for d'n'd function of antiword
kbdinfo (1) - obtain information about the status of a console
kbxutil (1) - List, export, import Keybox data
kdump (8) - This is just a placeholder until real man page has bee...
kernel-package (5) - system for creating kernel related packages
kfifo_dma_in_prepare (9) - setup a scatterlist for DMA input
kfifo_dma_out_prepare (9) - setup a scatterlist for DMA output
kfree_const (9) - conditionally free memory
KickStart (9) - Perform hard reset of MPT adapter.
kmem (4) - system memory, kernel memory and system ports
kmsg_dump_register (9) - register a kernel log dumper.
kmsg_dump_unregister (9) - unregister a kmsg dumper.
kobject_create_and_add (9) - create a struct kobject dynamically and register...
kobject_init (9) - initialize a kobject structure
kobject_init_and_add (9) - initialize a kobject structure and add it to the k...
kset_create_and_add (9) - create a struct kset dynamically and add it to sysfs
kset_register (9) - initialize and add a kset.
kset_unregister (9) - remove a kset.
kstat_irqs (9) - Get the statistics for an interrupt
kstat_irqs_cpu (9) - Get the statistics for an interrupt on a cpu
kstat_irqs_usr (9) - Get the statistics for an interrupt
kstrdup (9) - allocate space for and copy an existing string
kstrdup_const (9) - conditionally duplicate an existing const string
kstrndup (9) - allocate space for and copy an existing string
kstrtobool (9) - convert common user inputs into boolean values
kstrtoint (9) - convert a string to an int
kstrtol (9) - convert a string to a long
kstrtoll (9) - convert a string to a long long
kstrtouint (9) - convert a string to an unsigned int
kstrtoul (9) - convert a string to an unsigned long
kstrtoull (9) - convert a string to an unsigned long long
kthread_bind (9) - bind a just-created kthread to a cpu.
kthread_freezable_should_stop (9) - should this freezable kthread return now?
kthread_should_stop (9) - should this kthread return now?
kthread_stop (9) - stop a thread created by kthread_create.
kvm (1) - kvm-enabling wrapper for qemu-system-x86_64
last (1) - show listing of last logged in users
lastb (1) - show listing of last logged in users
lastlog (8) - reports the most recent login of all users or of a giv...
lcf (1) - Determine which of the historical versions of a config...
lcong48 (3) - generate uniformly distributed pseudo-random numbers
lcong48_r (3) - generate uniformly distributed pseudo-random numbers r...
ldap_table (5) - Postfix LDAP client configuration
le16toh (3) - convert values between host and big-/little-endian byt...
le32toh (3) - convert values between host and big-/little-endian byt...
le64toh (3) - convert values between host and big-/little-endian byt...
lease_get_mtime (9) - get the last modified time of an inode
less (3perl) - perl pragma to request less of something
lexnames (5WN) - List of WordNet lexicographer file names and numbers
lft (1) - print the route packets trace to network host
lft.db (1) - print the route packets trace to network host
lh_node_stats (3ssl) - LHASH statistics
lh_node_stats_bio (3ssl) - LHASH statistics
lh_node_usage_stats (3ssl) - LHASH statistics
lh_node_usage_stats_bio (3ssl) - LHASH statistics
lh_stats (3ssl) - LHASH statistics
lh_stats_bio (3ssl) - LHASH statistics
libc (7) - overview of standard C libraries on Linux
lighttpd (8) - a fast, secure and flexible web server
linux-version (1) - operate on Linux kernel version strings
Linux::LVM (3pm) - Perl extension for accessing Logical Volume Manager(LV...
lio_listio (3) - initiate a list of I/O requests
List::AllUtils (3pm) - Combines List::Util and List::MoreUtils in one bite-si...
List::MoreUtils (3pm) - Provide the stuff missing in List::Util
List::Util (3perl) - A selection of general-utility list subroutines
List::Util::XS (3perl) - Indicate if List::Util was compiled with a C compiler
list_add (9) - add a new entry
list_add_tail (9) - add a new entry
list_cut_position (9) - cut a list into two
list_del_init (9) - deletes entry from list and reinitialize it.
list_empty (9) - tests whether a list is empty
list_empty_careful (9) - tests whether a list is empty and not being modified
list_entry (9) - get the struct for this entry
list_first_entry (9) - get the first element from a list
list_first_entry_or_null (9) - get the first element from a list
list_for_each (9) - iterate over a list
list_for_each_entry (9) - iterate over list of given type
list_for_each_entry_continue (9) - continue iteration over list of given type
list_for_each_entry_continue_reverse (9) - iterate backwards from the given p...
list_for_each_entry_from (9) - iterate over list of given type from the curre...
list_for_each_entry_reverse (9) - iterate backwards over list of given type.
list_for_each_entry_safe (9) - iterate over list of given type safe against r...
list_for_each_entry_safe_continue (9) - continue list iteration safe against ...
list_for_each_entry_safe_from (9) - iterate over list from current point safe...
list_for_each_entry_safe_reverse (9) - iterate backwards over list safe again...
list_for_each_prev (9) - iterate over a list backwards
list_for_each_prev_safe (9) - iterate over a list backwards safe against remo...
list_for_each_safe (9) - iterate over a list safe against removal of list entry
LIST_HEAD (3) - implementations of lists, tail queues, and circular qu...
LIST_INIT (3) - implementations of lists, tail queues, and circular qu...
LIST_INSERT_AFTER (3) - implementations of lists, tail queues, and circular q...
LIST_INSERT_HEAD (3) - implementations of lists, tail queues, and circular qu...
list_is_last (9) - tests whether list is the last entry in list head
list_is_singular (9) - tests whether a list has just one entry.
list_last_entry (9) - get the last element from a list
list_move (9) - delete from one list and add as another's head
list_move_tail (9) - delete from one list and add as another's tail
list_next_entry (9) - get the next element in list
list_prepare_entry (9) - prepare a pos entry for use in list_for_each_entry_c...
list_prev_entry (9) - get the prev element in list
LIST_REMOVE (3) - implementations of lists, tail queues, and circular qu...
list_replace (9) - replace old entry by new one
list_rotate_left (9) - rotate the list to the left
list_safe_reset_next (9) - reset a stale list_for_each_entry_safe loop
list_splice (9) - join two lists, this is designed for stacks
list_splice_init (9) - join two lists and reinitialise the emptied list.
list_splice_tail (9) - join two lists, each list being a queue
list_splice_tail_init (9) - join two lists and reinitialise the emptied list
listen (2) - listen for connections on a socket
listres (1) - list resources in widgets
llrint (3) - round to nearest integer
llrintf (3) - round to nearest integer
llrintl (3) - round to nearest integer
llround (3) - round to nearest integer, away from zero
llroundf (3) - round to nearest integer, away from zero
llroundl (3) - round to nearest integer, away from zero
lmdb_table (5) - Postfix LMDB adapter
lmhosts (5) - The Samba NetBIOS hosts file
lnstat (8) - unified linux network statistics
local (8postfix) - Postfix local mail delivery
Locale::Codes (3perl) - a distribution of modules to handle locale codes
Locale::Codes::Constants (3perl) - constants for Locale codes
Locale::Codes::Country (3perl) - standard codes for country identification
Locale::Codes::Currency (3perl) - standard codes for currency identification
Locale::Codes::LangExt (3perl) - standard codes for language extension identi...
Locale::Codes::LangFam (3perl) - standard codes for language extension identi...
Locale::Codes::Language (3perl) - standard codes for language identification
Locale::Codes::LangVar (3perl) - standard codes for language variation identi...
Locale::Codes::Script (3perl) - standard codes for script identification
Locale::Country (3perl) - standard codes for country identification
Locale::Currency (3perl) - standard codes for currency identification
Locale::Language (3perl) - standard codes for language identification
Locale::Script (3perl) - standard codes for script identification
localectl (1) - Control the system locale and keyboard layout settings
lock (2) - unimplemented system calls
lock_sock_fast (9) - fast version of lock_sock
lockf (3) - apply, test or remove a POSIX lock on an open file
Log::Any (3pm) - - Bringing loggers and listeners together
Log::Any::Test (3pm) - - Test what you're logging with Log::Any
logger (1) - a shell command interface to the syslog(3) system log ...
login (1) - begin session on the system
loginctl (1) - Control the systemd login manager
logresolve (1) - Resolve IP-addresses to hostnames in Apache log files
logrotate (8) - rotates, compresses, and mails system logs
logrotate.conf (5) - rotates, compresses, and mails system logs
longjmp (3) - nonlocal jump to a saved stack context
look (1) - display lines beginning with a given string
lookup_bdev (9) - lookup a struct block_device by name
lookup_one_len (9) - filesystem helper to lookup single pathname component
lookup_one_len_unlocked (9) - filesystem helper to lookup single pathname com...
lookup_resource (9) - find an existing resource by a resource start address
lorder (1) - list dependencies for object files
lrand48 (3) - generate uniformly distributed pseudo-random numbers
lrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
lrint (3) - round to nearest integer
lrintf (3) - round to nearest integer
lrintl (3) - round to nearest integer
lround (3) - round to nearest integer, away from zero
lroundf (3) - round to nearest integer, away from zero
lroundl (3) - round to nearest integer, away from zero
ls (1) - list directory contents
lsattr (1) - list file attributes on a Linux second extended file s...
lsb_release (1) - print distribution-specific information
lsblk (8) - list block devices
lscgroup (1) - list all cgroups
lsinitramfs (8) - list content of an initramfs image
lslocks (8) - list local system locks
lsmod (8) - Show the status of modules in the Linux Kernel
lsof (8) - list open files
lspci (8) - list all PCI devices
lspgpot (1) - extracts the ownertrust values from PGP keyrings and l...
lssubsys (1) - list hierarchies containing given subsystem
lstat (2) - get file status
lstat64 (2) - get file status
lsusb (8) - list USB devices
lutimes (3) - change file timestamps
lvcreate (8) - create a logical volume in an existing volume group
lvmdump (8) - create lvm2 information dumps for diagnostic purposes
lvmsadc (8) - LVM system activity data collector
lvmsar (8) - LVM system activity reporter
lwp-request (1p) - Simple command line user agent
lxc-attach (1) - start a process inside a running container.
lxc-autostart (1) - start/stop/kill auto-started containers
lxc-clone (1) - clone a new container from an existing one.
lxc-config (1) - query LXC system configuration
lxc-destroy (1) - destroy a container.
lxc-ls (1) - list the containers existing on the system
lxc-monitor (1) - monitor the container state
lxc-snapshot (1) - Snapshot an existing container.
lxc-start (1) - run an application inside a container.
lxc-start-ephemeral (1) - start an ephemeral copy of an existing container
lxc-stop (1) - stop the application running inside a container
lxc-usernet (5) - unprivileged user network administration file.
lxc-wait (1) - wait for a specific container state
lxc.system.conf (5) - LXC system configuration file
lynx (1) - a general purpose distributed information browser for ...
lzmainfo (1) - show information stored in the .lzma file header
mac_vmode_to_var (9) - converts vmode/cmode pair to var structure
machinectl (1) - Control the systemd machine manager
madvise1 (2) - unimplemented system calls
Mail::Box-Index (3pm) - list of all extended documentation
Mail::Box::FastScalar (3pm) - fast alternative to IO::Scalar
Mail::Box::Message::Destructed (3pm) - a destructed message
Mail::Box::Net (3pm) - handle folders which are stored remote.
Mail::Box::Net::Message (3pm) - one message from a distant folder
Mail::Box::Tie (3pm) - access an existing message-folder as an array or hash
Mail::Box::Tie::ARRAY (3pm) - access an existing message folder as array
Mail::Box::Tie::HASH (3pm) - access an existing message folder as a hash
Mail::DKIM::Policy (3pm) - abstract base class for originator "signing" policies
Mail::Field::AddrList (3pm) - object representation of e-mail address lists
Mail::Message::Body::Construct (3pm) - adds functionality to Mail::Message::Body
Mail::Message::Body::File (3pm) - body of a message temporarily stored in a file
Mail::Message::Body::Lines (3pm) - body of a Mail::Message stored as array of...
Mail::Message::Body::Nested (3pm) - body of a message which contains a message
Mail::Message::Body::String (3pm) - body of a Mail::Message stored as single ...
Mail::Message::Construct (3pm) - extends the functionality of a Mail::Message
Mail::Message::Construct::Bounce (3pm) - bounce a Mail::Message
Mail::Message::Construct::Build (3pm) - building a Mail::Message from components
Mail::Message::Construct::Forward (3pm) - forwarding a Mail::Message
Mail::Message::Construct::Read (3pm) - read a Mail::Message from a file handle
Mail::Message::Construct::Rebuild (3pm) - modify a Mail::Message
Mail::Message::Construct::Reply (3pm) - reply to a Mail::Message
Mail::Message::Construct::Text (3pm) - capture a Mail::Message as text
Mail::Message::Convert::HtmlFormatPS (3pm) - Convert HTML into PostScript
Mail::Message::Field::Fast (3pm) - one line of a message header
Mail::Message::Field::Full (3pm) - construct one smart line in a message header
Mail::Message::Field::Structured (3pm) - one line of a structured message header
Mail::Message::Field::Unstructured (3pm) - smart unstructured field
Mail::Message::Head::ListGroup (3pm) - mailinglist related header fields
Mail::Server::IMAP4::List (3pm) - folder related IMAP4 answers
Mail::SpamAssassin::AutoWhitelist (3pm) - auto-whitelist handler for SpamAssa...
Mail::SpamAssassin::BayesStore (3pm) - Storage Module for default Bayes class...
Mail::SpamAssassin::BayesStore::BDB (3pm) - BerkeleyDB Bayesian Storage Modul...
Mail::SpamAssassin::BayesStore::MySQL (3pm) - MySQL Specific Bayesian Storage...
Mail::SpamAssassin::BayesStore::PgSQL (3pm) - PostgreSQL Specific Bayesian St...
Mail::SpamAssassin::BayesStore::Redis (3pm) - Redis Bayesian Storage Module I...
Mail::SpamAssassin::BayesStore::SQL (3pm) - SQL Bayesian Storage Module Imple...
Mail::SpamAssassin::Logger::Stderr (3pm) - log to standard error
Mail::SpamAssassin::PerMsgLearner (3pm) - per-message status (spam or not-spam)
Mail::SpamAssassin::PerMsgStatus (3pm) - per-message status (spam or not-spam)
Mail::SpamAssassin::PersistentAddrList (3pm) - persistent address list base c...
Mail::SpamAssassin::Plugin::AccessDB (3pm) - check message against Access Dat...
Mail::SpamAssassin::Plugin::AntiVirus (3pm) - simple anti-virus tests
Mail::SpamAssassin::Plugin::AskDNS (3pm) - form a DNS query using tag values,...
Mail::SpamAssassin::Plugin::ASN (3pm) - SpamAssassin plugin to look up the Au...
Mail::SpamAssassin::Plugin::AWL (3pm) - Normalize scores via auto-whitelist
Mail::SpamAssassin::Plugin::DKIM (3pm) - perform DKIM verification tests
Mail::SpamAssassin::Plugin::DNSEval (3pm) - look up URLs against DNS blocklists
Mail::SpamAssassin::Plugin::Hashcash (3pm) - perform hashcash verification tests
Mail::SpamAssassin::Plugin::MIMEHeader (3pm) - perform regexp tests against M...
Mail::SpamAssassin::Plugin::OneLineBo... (3pm) - spamassassin body test plugin
Mail::SpamAssassin::Plugin::SPF (3pm) - perform SPF verification tests
Mail::SpamAssassin::Plugin::URIDetail (3pm) - test URIs using detailed URI in...
Mail::SpamAssassin::Plugin::URIDNSBL (3pm) - look up URLs against DNS blocklists
Mail::SpamAssassin::Plugin::WhiteList... (3pm) - whitelist by Subject header
Mail::SpamAssassin::SQLBasedAddrList (3pm) - SpamAssassin SQL Based Auto Whit...
Mail::SpamAssassin::SubProcBackChannel (3pm) - back-channel for communication...
Mail::SpamAssassin::Util::RegistrarBo... (3pm) - domain delegation rules
Mail::SPF::MacroString (3pm) - SPF record macro string class
Mail::SPF::Mech::Exists (3pm) - SPF record "exists" mechanism class
Mail::SPF::Record (3pm) - Abstract base class for SPF records
Mail::SPF::Request (3pm) - SPF request class
Mail::SPF::SenderIPAddrMech (3pm) - Abstract base class for SPF record mechan...
Mail::SPF::Server (3pm) - Server class for processing SPF requests
mailname (5) - the visible mail name of the system
mailq (1) - Postfix to Sendmail compatibility interface
mailstat (1) - shows mail-arrival statistics
make-first-existing-target (1) - runs make on one of several targets
makefs (8) - create a file system image from a directory tree
MakeIocReady (9) - Get IOC to a READY state, using KickStart if needed.
malloc_get_state (3) - record and restore state of malloc implementation
malloc_info (3) - export malloc state to a stream
malloc_set_state (3) - record and restore state of malloc implementation
malloc_stats (3) - print memory allocation statistics
maple_add_packet (9) - add a single instruction to the maple bus queue
maple_driver_register (9) - register a maple driver
maple_driver_unregister (9) - unregister a maple driver.
Mason::CodeCache (3pm) - Result returned from Mason request
Mason::Filters::Standard (3pm) - Standard filters
Mason::Manual::FAQ (3pm) - Frequently asked questions about Mason
Mason::Manual::Intro (3pm) - Getting started with Mason
Mason::Manual::RequestDispatch (3pm) - How request paths get mapped to page c...
Mason::Manual::Subclasses (3pm) - Creating custom subclasses of Mason's classes
Mason::Plugin::Defer (3pm) - Defer computing parts of output until the end of...
Mason::Plugin::DollarDot (3pm) - Allow $. as substitution for $self-> and in ...
Mason::Request (3pm) - Mason Request Class
Mason::Result (3pm) - Result returned from Mason request
master (5) - Postfix master process configuration file format
master (8postfix) - Postfix master process
match_string (9) - matches given string in an array
matchpathcon_checkmatches (3) - check and report whether any specification in...
matchpathcon_filespec_add (3) - check and report whether any specification in...
matchpathcon_filespec_destroy (3) - check and report whether any specificatio...
matchpathcon_filespec_eval (3) - check and report whether any specification i...
Math::BigInt::FastCalc (3perl) - Math::BigInt::Calc with some XS for more speed
mbox (5) - Format for mail message storage.
mbsinit (3) - test for initial shift state
mbsnrtowcs (3) - convert a multibyte string to a wide-character string
mbsrtowcs (3) - convert a multibyte string to a wide-character string
mbstowcs (3) - convert a multibyte string to a wide-character string
mcheck (3) - heap consistency checking
mcheck_check_all (3) - heap consistency checking
mcheck_pedantic (3) - heap consistency checking
md2 (1ssl) - message digests
md4 (1ssl) - message digests
md5 (1ssl) - message digests
md5sum (1) - compute and check MD5 message digest
md5sum.textutils (1) - compute and check MD5 message digest
mdc2 (1ssl) - message digests
mdiobus_alloc_size (9) - allocate a mii_bus structure
mdiobus_free (9) - free a struct mii_bus
mdiobus_read (9) - Convenience function for reading a given MII mgmt regi...
mdiobus_read_nested (9) - Nested version of the mdiobus_read function
mdiobus_write (9) - Convenience function for writing a given MII mgmt regi...
mdiobus_write_nested (9) - Nested version of the mdiobus_write function
mem (4) - system memory, kernel memory and system ports
memcache_table (5) - Postfix memcache client configuration
memmem (3) - locate a substring
Memoize (3perl) - Make functions faster by trading space for time
Memoize::AnyDBM_File (3perl) - glue to provide EXISTS for AnyDBM_File for Sto...
Memoize::ExpireFile (3perl) - test for Memoize expiration semantics
Memoize::ExpireTest (3perl) - test for Memoize expiration semantics
Memoize::NDBM_File (3perl) - glue to provide EXISTS for NDBM_File for Storabl...
Memoize::SDBM_File (3perl) - glue to provide EXISTS for SDBM_File for Storabl...
Memoize::Storable (3perl) - store Memoized data in Storable database
memparse (9) - parse a string with mem suffixes into a number
mempool_destroy (9) - deallocate a memory pool
mempool_resize (9) - resize an existing memory pool
memset (3) - fill memory with a constant byte
memusagestat (1) - generate graphic from memory profiling data
metaclass (3pm) - a pragma for installing and using Class::MOP metaclasses
mewest (1) - register messages into an index for Hyper Estraier
mewstunnel (1) - stunnel wrapper for Mew
mii-tool (8) - view, manipulate media-independent interface status
MIME::Base64 (3perl) - Encoding and decoding of base64 strings
MIME::Decoder (3pm) - an object for decoding the body part of a MIME stream
MIME::Decoder::Base64 (3pm) - encode/decode a "base64" stream
MIME::Decoder::BinHex (3pm) - decode a "binhex" stream
MIME::Decoder::Gzip64 (3pm) - decode a "base64" gzip stream
MIME::Decoder::NBit (3pm) - encode/decode a "7bit" or "8bit" stream
MIME::Decoder::QuotedPrint (3pm) - encode/decode a "quoted-printable" stream
MIME::Decoder::UU (3pm) - decode a "uuencoded" stream
MIME::Field::ParamVal (3pm) - subclass of Mail::Field, for structured MIME fi...
MIME::Parser (3pm) - experimental class for parsing MIME streams
MIME::Parser::Results (3pm) - results of the last entity parsed
MIME::QuotedPrint (3perl) - Encoding and decoding of quoted-printable strings
misc_deregister (9) - unregister a miscellaneous device
misc_register (9) - register a miscellaneous device
mke2fs (8) - create an ext2/ext3/ext4 filesystem
mkfs (8) - build a Linux filesystem
mkfs.bfs (8) - make an SCO bfs filesystem
mkfs.btrfs (8) - create a btrfs filesystem
mkfs.cramfs (8) - make compressed ROM file system
mkfs.ext2 (8) - create an ext2/ext3/ext4 filesystem
mkfs.ext3 (8) - create an ext2/ext3/ext4 filesystem
mkfs.ext4 (8) - create an ext2/ext3/ext4 filesystem
mkfs.ext4dev (8) - create an ext2/ext3/ext4 filesystem
mkfs.minix (8) - make a Minix filesystem
mkfs.reiserfs (8) - The create tool for the Linux ReiserFS filesystem.
mkfs.xfs (8) - construct an XFS filesystem
mklost+found (8) - create a lost+found directory on a mounted Linux secon...
mkostemp (3) - create a unique temporary file
mkostemps (3) - create a unique temporary file
mkreiserfs (8) - The create tool for the Linux ReiserFS filesystem.
mksh-static (1) - MirBSD Korn shell
mkstemp (3) - create a unique temporary file
mkstemps (3) - create a unique temporary file
mmdf (5) - Multi-channel Memorandum Distribution Facility mailbox...
mode_to_security_class (3) - convert between SELinux class and permission val...
ModPerl::Code (3pm) - Perl Interface for $class Constants
ModPerl::Const (3pm) - - ModPerl Constants
ModPerl::CScan (3pm) - scan C language files for easily recognized constructs.
ModPerl::Global (3pm) - - Perl API for manipulating special Perl lists
ModPerl::Registry (3pm) - Run unaltered CGI scripts persistently under mod_perl
ModPerl::RegistryBB (3pm) - Run unaltered CGI scripts persistently under mod_...
ModPerl::RegistryCooker (3pm) - Cook mod_perl 2.0 Registry Modules
ModPerl::RegistryLoader (3pm) - Compile ModPerl::RegistryCooker scripts at se...
ModPerl::RegistryPrefork (3pm) - Run unaltered CGI scripts under mod_perl
Module::Build (3perl) - Build and install Perl modules
Module::Build::Bundling (3perl) - How to bundle Module::Build with a distribu...
Module::Build::Notes (3perl) - Create persistent distribution configuration m...
Module::Build::Platform::Default (3perl) - Stub class for unknown platforms
Module::CoreList (3perl) - what modules shipped with versions of perl
Module::CoreList::Utils (3perl) - what utilities shipped with versions of perl
module_i2c_driver (9) - Helper macro for registering a modular I2C driver
module_spi_driver (9) - Helper macro for registering a SPI driver
module_usb_composite_driver (9) - Helper macro for registering a USB gadget c...
module_usb_driver (9) - Helper macro for registering a USB driver
module_w1_family (9) - Helper macro for registering a 1-Wire families
Moo (3pm) - Minimalist Object Orientation (with Moose compatibility)
Moose (3pm) - A postmodern object system for Perl 5
Moose::Cookbook::Basics::BankAccount_... (3pm) - Demonstrates the use of meth...
Moose::Cookbook::Basics::BinaryTree_A... (3pm) - Demonstrates various attribu...
Moose::Cookbook::Basics::Company_Subt... (3pm) - Demonstrates the use of subt...
Moose::Cookbook::Basics::HTTP_Subtype... (3pm) - Demonstrates subtypes and co...
Moose::Cookbook::Basics::Immutable (3pm) - Making Moose fast by making your c...
Moose::Cookbook::Basics::Person_BUILD... (3pm) - Using BUILDARGS and BUILD to...
Moose::Cookbook::Extending::Mooseish_... (3pm) - Acting like Moose.pm and pro...
Moose::Cookbook::Meta::GlobRef_Instan... (3pm) - Creating a glob reference me...
Moose::Cookbook::Meta::Table_Metaclas... (3pm) - Adding a "table" attribute a...
Moose::Cookbook::Roles::ApplicationTo... (3pm) - Applying a role to an object...
Moose::Cookbook::Roles::Restartable_A... (3pm) - Advanced Role Composition - ...
Moose::Cookbook::Snack::Keywords (3pm) - Restricted "keywords" in Moose
Moose::Cookbook::Snack::Types (3pm) - Snippets of code for using Types and Ty...
Moose::Cookbook::Style (3pm) - Expanded into Moose::Manual::BestPractices, so...
Moose::Exporter (3pm) - make an import() and unimport() just like Moose.pm
Moose::Manual::BestPractices (3pm) - Get the most out of Moose
Moose::Manual::Construction (3pm) - Object construction (and destruction) wit...
Moose::Manual::Exceptions::Manifest (3pm) - Moose's Exception Types
Moose::Manual::FAQ (3pm) - Frequently asked questions about Moose
Moose::Manual::Types (3pm) - Moose's type system
Moose::Meta::Attribute::Native::Trait... (3pm) - Helper trait for Str attributes
Moose::Meta::Instance (3pm) - The Moose Instance metaclass
Moose::Meta::Method::Constructor (3pm) - Method Meta Object for constructors
Moose::Meta::Method::Destructor (3pm) - Method Meta Object for destructors
Moose::Meta::Role::Application::ToIns... (3pm) - Compose a role into an instance
Moose::Meta::TypeConstraint (3pm) - The Moose Type Constraint metaclass
Moose::Meta::TypeConstraint::Class (3pm) - Class/TypeConstraint parallel hier...
Moose::Meta::TypeConstraint::DuckType (3pm) - Type constraint for duck typing
Moose::Meta::TypeConstraint::Enum (3pm) - Type constraint for enumerated values.
Moose::Meta::TypeConstraint::Paramete... (3pm) - Type constraints which can t...
Moose::Meta::TypeConstraint::Paramete... (3pm) - Type constraints with a boun...
Moose::Meta::TypeConstraint::Registry (3pm) - registry for type constraints
Moose::Meta::TypeConstraint::Role (3pm) - Role/TypeConstraint parallel hierarchy
Moose::Meta::TypeConstraint::Union (3pm) - A union of Moose type constraints
Moose::Util::TypeConstraints (3pm) - Type constraint system for Moose
MooseX::StrictConstructor (3pm) - Make your object constructors blow up on un...
MooseX::StrictConstructor::Trait::Class (3pm) - A role to make immutable cons...
MooseX::StrictConstructor::Trait::Met... (3pm) - A role to make immutable con...
mount (2) - mount filesystem
mount (8) - mount a filesystem
mpage_readpages (9) - populate an address space with some pages & start read...
mpage_writepages (9) - walk the list of dirty pages of the given address spac...
mprobe (3) - heap consistency checking
mpstat (1) - Report processors related statistics.
mpt_attach (9) - Install a PCI intelligent MPT adapter.
mpt_deregister (9) - Deregister a protocol drivers resources.
mpt_device_driver_deregister (9) - DeRegister device driver hooks
mpt_device_driver_register (9) - Register device driver hooks
mpt_do_upload (9) - Construct and Send FWUpload request to MPT adapter port.
mpt_event_deregister (9) - Deregister protocol-specific event callback handler
mpt_event_register (9) - Register protocol-specific event callback handler.
mpt_free_msg_frame (9) - Place MPT request frame back on FreeQ.
mpt_get_cb_idx (9) - obtain cb_idx for registered driver
mpt_get_msg_frame (9) - Obtain an MPT request frame from the pool
mpt_get_product_name (9) - returns product string
mpt_GetIocState (9) - Get the current state of a MPT adapter.
mpt_handshake_req_reply_wait (9) - Send MPT request to and receive reply from...
mpt_host_page_access_control (9) - control the IOC's Host Page Buffer access
mpt_host_page_alloc (9) - allocate system memory for the fw
mpt_inactive_raid_list_free (9) - This clears this link list.
mpt_inactive_raid_volumes (9) - sets up link list of phy_disk_nums for device...
mpt_iocstatus_info (9) - IOCSTATUS information returned from IOC.
mpt_iocstatus_info_config (9) - IOCSTATUS information for config pages
mpt_put_msg_frame (9) - Send a protocol-specific MPT request frame to an IOC
mpt_put_msg_frame_hi_pri (9) - Send a hi-pri protocol-specific MPT request frame
mpt_register (9) - Register protocol-specific main callback handler.
mpt_reset_deregister (9) - Deregister protocol-specific IOC reset handler.
mpt_reset_register (9) - Register protocol-specific IOC reset handler.
mpt_send_handshake_request (9) - Send MPT request via doorbell handshake method.
mpt_verify_adapter (9) - Given IOC identifier, set pointer to its adapter str...
mptbase_sas_persist_operation (9) - Perform operation on SAS Persistent Table
mptfc_exit (9) - Unregisters MPT adapter(s)
mptfc_init (9) - Register MPT adapter(s) as SCSI host(s) with SCSI mid-...
mptfc_remove (9) - Remove fc infrastructure for devices
mptscsih_get_completion_code (9) - get completion code from MPT request
mptscsih_getclear_scsi_lookup (9) - retrieves and clears scmd entry from Scsi...
mptscsih_host_reset (9) - Perform a SCSI host adapter RESET (new_eh variant)
mptscsih_qcmd (9) - Primary Fusion MPT SCSI initiator IO start routine.
mptscsih_set_scsi_lookup (9) - write a scmd entry into the ScsiLookup[] array...
mptscsih_taskmgmt_complete (9) - Registered with Fusion MPT base driver
mptspi_exit (9) - Unregisters MPT adapter(s)
mptspi_init (9) - Register MPT adapter(s) as SCSI host(s) with SCSI mid-...
mpx (2) - unimplemented system calls
mq_notify (2) - register for notification when a message is available
mq_notify (3) - register for notification when a message is available
mrand48 (3) - generate uniformly distributed pseudo-random numbers
mrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
msgctl (2) - System V message control operations
msgget (2) - get a System V message queue identifier
msgop (2) - System V message queue operations
msgrcv (2) - System V message queue operations
msgsnd (2) - System V message queue operations
mtr (8) - a network diagnostic tool
multilog (8) - reads a sequence of lines from stdin and appends selec...
munchlist (1) - Interactive spelling checking
mysql_convert_table_format (1) - convert tables to use a given storage engine
mysql_find_rows (1) - extract SQL statements from files
mysql_install_db (1) - initialize MySQL data directory
mysql_secure_installation (1) - improve MySQL installation security
mysql_table (5) - Postfix MySQL client configuration
mysql_tableinfo (1) - creates and populates information tables with the outp...
mysqladmin (1) - client for administering a MySQL server
mysqld_safe (1) - MySQL server startup script
mysqlreport (1) - Makes a friendly report of important MySQL status values
mysqltest (1) - Regressiontest program for MySQL.
MyTest::Util (3pm) - - helper functions
nand_check_erased_buf (9) - check if a buffer contains (almost) only 0xff data
nand_check_erased_ecc_chunk (9) - check if an ECC chunk contains (almost) onl...
nand_create_badblock_pattern (9) - [INTERN] Creates a BBT descriptor structure
nand_read_oob_std (9) - [REPLACEABLE] the most common OOB data read function
nand_read_page_hwecc_oob_first (9) - [REPLACEABLE] hw ecc, read oob first
nand_wait_status_ready (9) - [GENERIC] Wait for the ready status after commands.
nand_write_oob_std (9) - [REPLACEABLE] the most common OOB data write function
nc (1) - arbitrary TCP and UDP connections and listens
nc.openbsd (1) - arbitrary TCP and UDP connections and listens
nc_openbsd (1) - arbitrary TCP and UDP connections and listens
ncal (1) - displays a calendar and the date of Easter
nearbyint (3) - round to nearest integer
nearbyintf (3) - round to nearest integer
nearbyintl (3) - round to nearest integer
net (8) - Tool for administration of Samba and remote CIFS servers.
net-server (1p) - Base Net::Server starting module
Net::DBus (3pm) - Perl extension for the DBus message system
Net::DBus::Binding::Bus (3pm) - Handle to a well-known message bus instance
Net::DBus::Binding::Value (3pm) - Strongly typed data value
Net::DBus::Dumper (3pm) - Stringify Net::DBus objects suitable for printing
Net::DBus::Test::MockConnection (3pm) - Fake a connection to the bus unit tes...
Net::DBus::Test::MockIterator (3pm) - Iterator over a mock message
Net::DBus::Test::MockMessage (3pm) - Fake a message object when unit testing
Net::DBus::Test::MockObject (3pm) - Fake an object from the bus for unit testing
Net::DNS (3pm) - Perl Interface to the Domain Name System
Net::DNS::FAQ (3pm) - Frequently Asked Net::DNS Questions
Net::DNS::Question (3pm) - DNS question record
Net::Domain (3perl) - Attempt to evaluate the current host's internet name a...
Net::hostent (3perl) - by-name interface to Perl's built-in gethost*() functions
Net::libnetFAQ (3perl) - libnet Frequently Asked Questions
Net::Ping (3perl) - check a remote host for reachability
Net::POP3 (3perl) - Post Office Protocol 3 Client class (RFC1939)
Net::Server::Proto::SSLEAY (3pm) - Custom Net::Server SSL protocol handler ba...
Net::SSH2::Listener (3pm) - SSH 2 listener object
Net::SSLeay::Handle (3pm) - Perl module that lets SSL (HTTPS) sockets be hand...
netcat (1) - arbitrary TCP and UDP connections and listens
netdev_all_lower_get_next (9) - Get the next device from all lower neighbour ...
netdev_all_lower_get_next_rcu (9) - Get the next device from all lower neighb...
netdev_all_upper_get_next_dev_rcu (9) - Get the next dev from upper list
netdev_is_rx_handler_busy (9) - check if receive handler is registered
netdev_lower_get_first_private_rcu (9) - Get the first - >private from the lo...
netdev_lower_get_next (9) - Get the next device from the lower neighbour list
netdev_lower_get_next_private (9) - Get the next - >private from the lower ne...
netdev_lower_get_next_private_rcu (9) - Get the next - >private from the lowe...
netdev_lower_state_changed (9) - Dispatch event about lower device state change
netdev_master_upper_dev_get (9) - Get master upper device
netdev_master_upper_dev_get_rcu (9) - Get master upper device
netdev_master_upper_dev_link (9) - Add a master link to the upper device
netdev_notify_peers (9) - notify network peers about existence of dev
netdev_rx_handler_register (9) - register receive handler
netdev_rx_handler_unregister (9) - unregister receive handler
netdev_state_change (9) - device changes state
netdev_upper_get_next_dev_rcu (9) - Get the next dev from upper list
netif_carrier_ok (9) - test if carrier present
netif_dormant (9) - test if carrier present
netif_is_multiqueue (9) - test if device has multiple transmit queues
netif_oper_up (9) - test if device is operational
netif_queue_stopped (9) - test if transmit queue is flowblocked
netif_running (9) - test if up
netif_rx (9) - post buffer to the network code
netif_stacked_transfer_operstate (9) - transfer operstate
netif_start_queue (9) - allow transmit
netif_start_subqueue (9) - allow sending packets on subqueue
netif_stop_queue (9) - stop transmitted packets
netif_stop_subqueue (9) - stop sending packets on subqueue
netif_wake_queue (9) - restart transmit
netstat (8) - Print network connections, routing tables, interface s...
newaliases (1) - Postfix to Sendmail compatibility interface
nfsiostat-sysstat (1) - (the nfsiostat command from the sysstat package) Repo...
nisdomainname (1) - show or set the system's NIS/YP domain name
nisplus_table (5) - Postfix NIS+ client
nm (1) - list symbols from object files
nologin (5) - prevent unprivileged users from logging into the system
notmuch-reply (1) - constructs a reply template for a set of messages
notmuch-restore (1) - restores the tags from the given file (see notmuch dump)
nrand48 (3) - generate uniformly distributed pseudo-random numbers
nrand48_r (3) - generate uniformly distributed pseudo-random numbers r...
nstat (8) - network statistics tools.
ntohl (3) - convert values between host and network byte order
ntohs (3) - convert values between host and network byte order
numfmt (1) - Convert numbers from/to human-readable strings
ocsp (1ssl) - Online Certificate Status Protocol utility
of_pwm_get (9) - request a PWM via the PWM framework
offsetof (3) - offset of a structure member
oid2name (1) - resolve OIDs and file nodes in a PostgreSQL data direc...
oldfstat (2) - get file status
oldlstat (2) - get file status
oldstat (2) - get file status
on_ac_power (1) - test whether computer is running on AC power
on_exit (3) - register a function to be called at normal process ter...
open (1) - start a program on a new virtual terminal (VT).
open_memstream (3) - open memory as stream
open_wmemstream (3) - open memory as stream
openlog (3) - send messages to the system logger
OpenSSL_add_all_digests (3ssl) - add algorithms to internal table
OpenSSL_add_ssl_algorithms (3ssl) - initialize SSL library by registering alg...
OPENSSL_load_builtin_modules (3ssl) - add standard configuration modules
openvt (1) - start a program on a new virtual terminal (VT).
ops (3perl) - Perl pragma to restrict unsafe operations when compiling
oqmgr (8postfix) - old Postfix queue manager
orbd (1) - The Object Request Broker Daemon
ordchr (3am) - convert characters to strings and vice versa
os-release (5) - Operating system identification
Package::Constants (3perl) - List all constants declared in a package
Package::DeprecationManager (3pm) - Manage deprecation warnings for your dist...
Package::Stash (3pm) - routines for manipulating stashes
Package::Stash::PP (3pm) - pure perl implementation of the Package::Stash API
Package::Stash::XS (3pm) - faster and more correct implementation of the Pack...
pam_access (8) - PAM module for logdaemon style login access control
pam_debug (8) - PAM module to debug the PAM stack
pam_fail_delay (3) - request a delay on failure
pam_getenvlist (3) - getting the PAM environment
pam_lastlog (8) - PAM module to display date of last login and perform i...
pam_listfile (8) - deny or allow services based on an arbitrary file
pam_localuser (8) - require users to be listed in /etc/passwd
pam_misc_paste_env (3) - transcribing an environment to that of PAM
pam_open_session (3) - start PAM session management
pam_pwhistory (8) - PAM module to remember last passwords
pam_rhosts (8) - The rhosts PAM module
pam_sepermit (8) - PAM module to allow/deny login depending on SELinux en...
pam_setcred (3) - establish / delete user credentials
pam_sm_open_session (3) - PAM service function to start session management
pam_start (3) - initialization of PAM transaction
pam_strerror (3) - return string describing PAM error code
pam_succeed_if (8) - test account characteristics
pam_syslog (3) - send messages to the system logger
pam_systemd (8) - Register user sessions in the systemd login manager
pam_timestamp (8) - Authenticate using cached successful authentication at...
pam_timestamp_check (8) - Check to see if the default timestamp is valid
pam_unix2 (8) - Standard PAM module for traditional password authentic...
pam_userdb (8) - PAM module to authenticate against a db database
pam_vsyslog (3) - send messages to the system logger
pam_xauth_data (3) - structure containing X authentication data
panic (9) - halt the system
paperconfig (8) - configure the system default paper size
parent (3perl) - Establish an ISA relationship with base classes at com...
parport_register_device (9) - register a device on a parallel port
parport_register_port (9) - register a parallel port
parport_remove_port (9) - deregister a parallel port
parport_unregister_device (9) - deregister a device on a parallel port
parport_unregister_driver (9) - deregister a parallel port device driver
parport_wait_peripheral (9) - wait for status lines to change in 35ms
part_round_stats (9) - Round off the performance stats on a struct disk_stats.
paste (1) - merge lines of files
pathmask_to_pos (9) - find the position of the left-most bit in a pathmask
pci_adjust_legacy_attr (9) - adjustment of legacy file attributes
pci_back_from_sleep (9) - turn PCI device on during system-wide transition in...
pci_bus_add_device (9) - start driver for a single device
pci_bus_add_devices (9) - start driver for PCI devices
pci_choose_state (9) - Choose the power state of a PCI device
pci_clear_master (9) - disables bus-mastering for device dev
pci_destroy_slot (9) - decrement refcount for physical PCI slot
pci_dev_get (9) - increments the reference count of the pci device struc...
pci_dev_present (9) - Returns 1 if device matching the device list is presen...
pci_dev_put (9) - release a use of the pci device structure
pci_enable_msi_range (9) - configure device's MSI capability structure
pci_enable_msix (9) - configure device's MSI-X capability structure
pci_enable_msix_range (9) - configure device's MSI-X capability structure
pci_hp_change_slot_info (9) - changes the slot's information structure in the...
pci_hp_deregister (9) - deregister a hotplug_slot with the PCI hotplug subsystem
pci_load_and_free_saved_state (9) - Reload the save state pointed to by state...
pci_load_saved_state (9) - Reload the provided save state into struct pci_dev.
pci_lost_interrupt (9) - reports a lost PCI interrupt
pci_prepare_to_sleep (9) - prepare PCI device for system-wide transition into...
pci_request_region (9) - Reserve PCI I/O and memory resource
pci_request_region_exclusive (9) - Reserved PCI I/O and memory resource
pci_request_regions (9) - Reserved PCI I/O and memory resources
pci_request_regions_exclusive (9) - Reserved PCI I/O and memory resources
pci_request_selected_regions (9) - Reserve selected PCI I/O and memory resources
pci_restore_state (9) - Restore the saved state of a PCI device
pci_save_state (9) - save the PCI configuration space of a device before su...
pci_set_cacheline_size (9) - ensure the CACHE_LINE_SIZE register is programmed
pci_set_master (9) - enables bus-mastering for device dev
pci_set_pcie_reset_state (9) - set reset state for device dev
pci_set_power_state (9) - Set the power state of a PCI device
pci_stop_and_remove_bus_device (9) - remove a PCI device and any children
pci_store_saved_state (9) - Allocate and return an opaque struct containing t...
pci_unregister_driver (9) - unregister a pci driver
pci_vfs_assigned (9) - returns number of VFs are assigned to a guest
pcie_get_readrq (9) - get PCI Express read request size
pcie_set_readrq (9) - set PCI Express maximum memory read request
pcimodules (8) - List kernel driver modules available for all currently...
pclose (3) - pipe stream to or from a process
pcm_format_to_bits (9) - Strong-typed conversion of pcm_format to bitwise
pcre16_assign_jit_stack (3) - Perl-compatible regular expressions
pcre16_copy_named_substring (3) - Perl-compatible regular expressions
pcre16_copy_substring (3) - Perl-compatible regular expressions
pcre16_free_study (3) - Perl-compatible regular expressions
pcre16_free_substring (3) - Perl-compatible regular expressions
pcre16_free_substring_list (3) - Perl-compatible regular expressions
pcre16_get_named_substring (3) - Perl-compatible regular expressions
pcre16_get_stringnumber (3) - Perl-compatible regular expressions
pcre16_get_stringtable_entries (3) - Perl-compatible regular expressions
pcre16_get_substring (3) - Perl-compatible regular expressions
pcre16_get_substring_list (3) - Perl-compatible regular expressions
pcre16_jit_stack_alloc (3) - Perl-compatible regular expressions
pcre16_jit_stack_free (3) - Perl-compatible regular expressions
pcre16_pattern_to_host_byte_order (3) - Perl-compatible regular expressions
pcre16_study (3) - Perl-compatible regular expressions
pcre16_utf16_to_host_byte_order (3) - Perl-compatible regular expressions
pcre32_assign_jit_stack (3) - Perl-compatible regular expressions
pcre32_copy_named_substring (3) - Perl-compatible regular expressions
pcre32_copy_substring (3) - Perl-compatible regular expressions
pcre32_free_study (3) - Perl-compatible regular expressions
pcre32_free_substring (3) - Perl-compatible regular expressions
pcre32_free_substring_list (3) - Perl-compatible regular expressions
pcre32_get_named_substring (3) - Perl-compatible regular expressions
pcre32_get_stringnumber (3) - Perl-compatible regular expressions
pcre32_get_stringtable_entries (3) - Perl-compatible regular expressions
pcre32_get_substring (3) - Perl-compatible regular expressions
pcre32_get_substring_list (3) - Perl-compatible regular expressions
pcre32_jit_stack_alloc (3) - Perl-compatible regular expressions
pcre32_jit_stack_free (3) - Perl-compatible regular expressions
pcre32_pattern_to_host_byte_order (3) - Perl-compatible regular expressions
pcre32_study (3) - Perl-compatible regular expressions
pcre32_utf32_to_host_byte_order (3) - Perl-compatible regular expressions
pcre_assign_jit_stack (3) - Perl-compatible regular expressions
pcre_copy_named_substring (3) - Perl-compatible regular expressions
pcre_copy_substring (3) - Perl-compatible regular expressions
pcre_free_study (3) - Perl-compatible regular expressions
pcre_free_substring (3) - Perl-compatible regular expressions
pcre_free_substring_list (3) - Perl-compatible regular expressions
pcre_get_named_substring (3) - Perl-compatible regular expressions
pcre_get_stringnumber (3) - Perl-compatible regular expressions
pcre_get_stringtable_entries (3) - Perl-compatible regular expressions
pcre_get_substring (3) - Perl-compatible regular expressions
pcre_get_substring_list (3) - Perl-compatible regular expressions
pcre_jit_stack_alloc (3) - Perl-compatible regular expressions
pcre_jit_stack_free (3) - Perl-compatible regular expressions
pcre_pattern_to_host_byte_order (3) - Perl-compatible regular expressions
pcre_study (3) - Perl-compatible regular expressions
pcre_table (5) - format of Postfix PCRE tables
pcre_utf16_to_host_byte_order (3) - Perl-compatible regular expressions
pcre_utf32_to_host_byte_order (3) - Perl-compatible regular expressions
pcrestack (3) - Perl-compatible regular expressions
pdftops (1) - Portable Document Format (PDF) to PostScript converter...
PEM_write_bio_CMS_stream (3ssl) - output CMS_ContentInfo structure in PEM for...
PEM_write_bio_PKCS7_stream (3ssl) - output PKCS7 structure in PEM format.
Perl4::CoreLibs (3pm) - libraries historically supplied with Perl 4
Perl::OSType (3perl) - Map Perl operating system names to generic types
perlaix (1) - Perl version 5 on IBM AIX (UNIX) systems
perlapio (1) - perl's IO abstraction interface.
perlartistic (1) - the Perl Artistic License
perlbs2000 (1) - building and installing Perl for BS2000.
perlclib (1) - Internal replacements for standard C library functions
perldiag (1) - various Perl diagnostics
perldsc (1) - Perl Data Structures Cookbook
perlexperiment (1) - A listing of experimental features in Perl
perlfaq (1) - frequently asked questions about Perl
perlfaq1 (1) - General Questions About Perl
perlfaq8 (1) - System Interaction
perlfreebsd (1) - Perl version 5 on FreeBSD systems
perlhist (1) - the Perl history records
perlhpux (1) - Perl version 5 on Hewlett-Packard Unix (HP-UX) systems
PerlIO::via::QuotedPrint (3perl) - PerlIO layer for quoted-printable strings
perlirix (1) - Perl version 5 on Irix systems
perlivp (1) - Perl Installation Verification Procedure
perllinux (1) - Perl version 5 on Linux systems
perlmodinstall (1) - Installing CPAN Modules
perlmodlib (1) - constructing new Perl modules and finding existing ones
perlmodstyle (1) - Perl module style guide
perlnewmod (1) - preparing a new module for distribution
perlopenbsd (1) - Perl version 5 on OpenBSD systems
perlos390 (1) - building and installing Perl for OS/390 and z/OS
perlpodstyle (1) - Perl POD style guide
perlref (1) - Perl references and nested data structures
perlrequick (1) - Perl regular expressions quick start
perlsolaris (1) - Perl version 5 on Solaris systems
perlstyle (1) - Perl style guide
perlsynology (1) - Perl 5 on Synology DSM systems
perltodo (1) - Link to the Perl to-do list
perltru64 (1) - Perl version 5 on Tru64 (formerly known as Digital UNI...
perlutil (1) - utilities packaged with the Perl distribution
perlvos (1) - Perl for Stratus OpenVOS
perlxstut (1) - Tutorial for writing XSUBs
perlxstypemap (1) - Perl XS C/Perl type mapping
perror (3) - print a system error message
tc-pfifo_fast (8) - three-band first in, first out queue
pflogsumm (1) - Produce Postfix MTA logfile summary
pg_archivecleanup (1) - clean up PostgreSQL WAL archive files
pg_basebackup (1) - take a base backup of a PostgreSQL cluster
pg_checksums (1) - enable, disable or check data checksums in a PostgreSQ...
pg_config (1) - retrieve information about the installed version of Po...
pg_conftool (1) - read and edit PostgreSQL cluster configuration files
pg_controldata (1) - display control information of a PostgreSQL database c...
pg_createcluster (1) - create a new PostgreSQL cluster
pg_ctl (1) - initialize, start, stop, or control a PostgreSQL server
pg_ctlcluster (1) - start/stop/restart/reload a PostgreSQL cluster
pg_dropcluster (1) - completely delete a PostgreSQL cluster
pg_dump (1) - extract a PostgreSQL database into a script file or ot...
pg_dumpall (1) - extract a PostgreSQL database cluster into a script file
pg_isready (1) - check the connection status of a PostgreSQL server
pg_lsclusters (1) - show information about all PostgreSQL clusters
pg_receivewal (1) - stream write-ahead logs from a PostgreSQL server
pg_recvlogical (1) - control PostgreSQL logical decoding streams
pg_renamecluster (1) - rename a PostgreSQL cluster
pg_resetwal (1) - reset the write-ahead log and other control informatio...
pg_restore (1) - restore a PostgreSQL database from an archive file cre...
pg_rewind (1) - synchronize a PostgreSQL data directory with another d...
pg_standby (1) - supports the creation of a PostgreSQL warm standby server
pg_test_fsync (1) - determine fastest wal_sync_method for PostgreSQL
pg_test_timing (1) - measure timing overhead
pg_updatedicts (8) - build PostgreSQL dictionaries from myspell/hunspell ones
pg_upgrade (1) - upgrade a PostgreSQL server instance
pg_upgradecluster (1) - upgrade an existing PostgreSQL cluster to a new major...
pg_virtualenv (1) - Create a throw-away PostgreSQL environment for running...
pg_waldump (1) - display a human-readable rendering of the write-ahead ...
pg_wrapper (1) - wrapper for PostgreSQL client commands
pgbench (1) - run a benchmark test on PostgreSQL
pgsql_table (5) - Postfix PostgreSQL client configuration
php5-fpm (8) - PHP FastCGI Process Manager 'PHP-FPM'
phy_aneg_done (9) - return auto-negotiation status
phy_config_interrupt (9) - configure the PHY device for the requested interrupts
phy_device_register (9) - Register the phy device on the MDIO bus
phy_device_remove (9) - Remove a previously registered phy device from the MD...
phy_disconnect (9) - disable interrupts, stop state machine, and detach a P...
phy_driver_register (9) - register a phy_driver with the PHY layer
phy_error (9) - enter HALTED state for this PHY device
phy_ethtool_get_eee (9) - get EEE supported and status
phy_ethtool_set_eee (9) - set EEE supported and status
phy_find_first (9) - finds the first PHY device on the bus
phy_find_valid (9) - find a PHY setting that matches the requested features...
phy_prepare_link (9) - prepares the PHY layer to monitor link status
phy_print_status (9) - Convenience function to print out the current phy status
phy_read_mmd_indirect (9) - reads data from the MMD registers
phy_register_fixup (9) - creates a new phy_fixup and adds it to the list
phy_start (9) - start or restart a PHY device
phy_start_aneg (9) - start auto-negotiation for this PHY device
phy_start_interrupts (9) - request and enable interrupts for a PHY device
phy_start_machine (9) - start PHY state machine tracking
phy_state_machine (9) - Handle the state machine
phy_stop (9) - Bring down the PHY link, and stop checking the status
phy_stop_interrupts (9) - disable interrupts from a PHY device
phy_stop_machine (9) - stop the PHY state machine tracking
phy_trigger_machine (9) - trigger the state machine to run
phy_write_mmd_indirect (9) - writes data to the MMD registers
phys (2) - unimplemented system calls
pickup (8postfix) - Postfix local mail pickup
pid_alive (9) - check that a task structure is not stale
pidstat (1) - Report statistics for Linux tasks.
piix_init_one (9) - Register PIIX ATA PCI device with kernel services
piix_pata_prereset (9) - prereset for PATA host controller
piix_set_dmamode (9) - Initialize host controller PATA DMA timings
piix_set_piomode (9) - Initialize host controller PATA PIO timings
ping (8) - send ICMP ECHO_REQUEST to network hosts
ping6 (8) - send ICMP ECHO_REQUEST to network hosts
pipe (8postfix) - Postfix delivery to external command
pivot_root (2) - change the root filesystem
pivot_root (8) - change the root filesystem
PKCS12_create (3ssl) - create a PKCS#12 structure
PKCS12_parse (3ssl) - parse a PKCS#12 structure
PKCS7_decrypt (3ssl) - decrypt content from a PKCS#7 envelopedData structure
PKCS7_encrypt (3ssl) - create a PKCS#7 envelopedData structure
PKCS7_sign (3ssl) - create a PKCS#7 signedData structure
PKCS7_sign_add_signer (3ssl) - add a signer PKCS7 signed data structure.
PKCS7_verify (3ssl) - verify a PKCS#7 signedData structure
platform_device_put (9) - destroy a platform device
platform_device_register (9) - add a platform-level device
platform_device_register_data (9) - add a platform-level device with platform...
platform_device_register_full (9) - add a platform-level device with resource...
platform_device_register_resndata (9) - add a platform-level device with reso...
platform_device_register_simple (9) - add a platform-level device and its res...
platform_device_unregister (9) - unregister a platform-level device
platform_driver_unregister (9) - unregister a driver for platform-level devices
platform_unregister_drivers (9) - unregister an array of platform drivers
pmailq (8) - Postfix MAIL Queue manager
pnp_register_card_driver (9) - registers a PnP card driver with the PnP Layer
pnp_register_protocol (9) - adds a pnp protocol to the pnp layer
pnp_request_card_device (9) - Searches for a PnP device under the specified card
pnp_start_dev (9) - low-level start of the PnP device
pnp_stop_dev (9) - low-level disable of the PnP device
pnp_unregister_card_driver (9) - unregisters a PnP card driver from the PnP L...
pnp_unregister_protocol (9) - removes a pnp protocol from the pnp layer
po2debconf (1) - merge master templates file and PO files
Pod::Perldoc::GetOptsOO (3perl) - Customized option parser for Pod::Perldoc
Pod::Simple::DumpAsText (3perl) - - dump Pod-parsing events as text
Pod::Simple::PullParserStartToken (3perl) - - start-tokens from Pod::Simple::...
Pod::Simple::XMLOutStream (3perl) - - turn Pod into XML
Pod::Text::Overstrike (3perl) - Convert POD data to formatted overstrike text
podebconf-report-po (1) - send outdated debconf PO files to the last translators
podselect (1) - print selected sections of pod documentation on standa...
policytool (1) - PolicyTool Administration GUI Utility
popen (3) - pipe stream to or from a process
port (4) - system memory, kernel memory and system ports
POSIX (3perl) - Perl interface to IEEE Std 1003.1
posix_lock_file (9) - Apply a POSIX-style lock to a file
posix_lock_inode_wait (9) - Apply a POSIX-style lock to a file
posix_unblock_lock (9) - stop waiting for a file lock
posixoptions (7) - optional parts of the POSIX standard
POST (1p) - Simple command line user agent
postalias (1) - Postfix alias database maintenance
postcat (1) - show Postfix queue file contents
postconf (1) - Postfix configuration utility
postconf (5) - Postfix configuration parameters
postdrop (1) - Postfix mail posting utility
postfix (1) - Postfix control program
postfix-add-filter (8) - add filter service to Postfix master.cf
postfix-add-policy (8) - add policy service to Postfix master.cf
postfix-wrapper (5) - Postfix multi-instance API
postgres (1) - PostgreSQL database server
postgresql-common (7) - wrapper for PostgreSQL client commands
postgresqlrc (5) - Per-user PostgreSQL cluster configuration
postkick (1) - kick a Postfix service
postlock (1) - lock mail folder and execute command
postlog (1) - Postfix-compatible logging utility
postmap (1) - Postfix lookup table management
postmaster (1) - PostgreSQL database server
postmulti (1) - Postfix multi-instance manager
postqueue (1) - Postfix queue control
postscreen (8postfix) - Postfix zombie blocker
postsuper (1) - Postfix superintendent
posttls-finger (1) - Probe the TLS properties of an ESMTP or LMTP server.
preconv (1) - convert encoding of input files to something GNU troff...
preempt_notifier_register (9) - tell me when current is being preempted & res...
preempt_notifier_unregister (9) - no longer interested in preemption notifica...
PREPARE (7) - prepare a statement for execution
prezip-bin (1) - prefix zip delta word list compressor/decompressor
PrimeIocFifos (9) - Initialize IOC request and reply FIFOs.
print_access_vector (3) - convert between SELinux class and permission values...
proc (5) - process information pseudo-filesystem
proc_dostring (9) - read a string sysctl
proc_print_scsidevice (9) - return data about this host
procfs (5) - process information pseudo-filesystem
procmpt_destroy (9) - Tear down MPT_PROCFS_MPTBASEDIR entries.
prof (2) - unimplemented system calls
projects (5) - persistent project root definition
prove (1) - Run tests through a TAP harness.
proxymap (8postfix) - Postfix lookup table proxy server
prtstat (1) - print statistics of a process
psed (1) - a stream editor
psfstriptable (1) - remove the embedded Unicode character table from a con...
psql (1) - PostgreSQL interactive terminal
pstree (1) - display a tree of processes
pstree.x11 (1) - display a tree of processes
pstruct (1) - Dump C structures as generated from "cc - g - S" stabs
ptardiff (1) - program that diffs an extracted archive against an une...
pthread_attr_destroy (3) - initialize and destroy thread attributes object
pthread_attr_getdetachstate (3) - set/get detach state attribute in thread at...
pthread_attr_getstack (3) - set/get stack attributes in thread attributes object
pthread_attr_getstackaddr (3) - set/get stack address attribute in thread att...
pthread_attr_getstacksize (3) - set/get stack size attribute in thread attrib...
pthread_attr_init (3) - initialize and destroy thread attributes object
pthread_attr_setdetachstate (3) - set/get detach state attribute in thread at...
pthread_attr_setstack (3) - set/get stack attributes in thread attributes object
pthread_attr_setstackaddr (3) - set/get stack address attribute in thread att...
pthread_attr_setstacksize (3) - set/get stack size attribute in thread attrib...
pthread_cancel (3) - send a cancellation request to a thread
pthread_cleanup_pop_restore_np (3) - push and pop thread cancellation clean-u...
pthread_setcancelstate (3) - set cancelability state and type
pthread_setcanceltype (3) - set cancelability state and type
pthread_testcancel (3) - request delivery of any pending cancellation request
ptmx (4) - pseudoterminal master and slave
pts (4) - pseudoterminal master and slave
pure-ftpd-control (8) - invokes init script for installed Pure-FTPd flavour
pure-ftpd-wrapper (8) - configures and starts Pure-FTPd daemon
pure-pwconvert (8) - Generate a virtual users file from system accounts
pure-statsdecode (8) - Show human-readable dates from a "stats" logfile
putc (3) - output of characters and strings
putc_unlocked (3) - nonlocking stdio functions
putchar (3) - output of characters and strings
putchar_unlocked (3) - nonlocking stdio functions
putmsg (2) - unimplemented system calls
putpmsg (2) - unimplemented system calls
puts (3) - output of characters and strings
putwc (3) - write a wide character to a FILE stream
putwc_unlocked (3) - nonlocking stdio functions
putwchar (3) - write a wide character to standard output
putwchar_unlocked (3) - nonlocking stdio functions
pwm_adjust_config (9) - adjust the current PWM config to the PWM arguments
pwm_apply_state (9) - atomically apply a new state to a PWM device
pwm_disable (9) - stop a PWM output toggling
pwm_enable (9) - start a PWM output toggling
pwm_get (9) - look up and request a PWM device
pwm_get_state (9) - retrieve the current PWM state
pwm_init_state (9) - prepare a new state to be applied with pwm_apply_state
pwm_request (9) - request a PWM device
pwm_request_from_chip (9) - request a PWM device relative to a PWM chip
pwmchip_add (9) - register a new PWM chip
pwmchip_add_with_polarity (9) - register a new PWM chip
pybuild (1) - invokes various build systems for requested Python ver...
qecvt (3) - convert a floating-point number to a string
qecvt_r (3) - convert a floating-point number to a string
qemu-system (1) - QEMU Emulator User Documentation
qemu-system-aarch64 (1) - QEMU Emulator User Documentation
qemu-system-alpha (1) - QEMU Emulator User Documentation
qemu-system-arm (1) - QEMU Emulator User Documentation
qemu-system-cris (1) - QEMU Emulator User Documentation
qemu-system-i386 (1) - QEMU Emulator User Documentation
qemu-system-lm32 (1) - QEMU Emulator User Documentation
qemu-system-m68k (1) - QEMU Emulator User Documentation
qemu-system-microblaze (1) - QEMU Emulator User Documentation
qemu-system-microblazeel (1) - QEMU Emulator User Documentation
qemu-system-mips (1) - QEMU Emulator User Documentation
qemu-system-mips64 (1) - QEMU Emulator User Documentation
qemu-system-mips64el (1) - QEMU Emulator User Documentation
qemu-system-mipsel (1) - QEMU Emulator User Documentation
qemu-system-moxie (1) - QEMU Emulator User Documentation
qemu-system-or32 (1) - QEMU Emulator User Documentation
qemu-system-ppc (1) - QEMU Emulator User Documentation
qemu-system-ppc64 (1) - QEMU Emulator User Documentation
qemu-system-ppcemb (1) - QEMU Emulator User Documentation
qemu-system-s390x (1) - QEMU Emulator User Documentation
qemu-system-sh4 (1) - QEMU Emulator User Documentation
qemu-system-sh4eb (1) - QEMU Emulator User Documentation
qemu-system-sparc (1) - QEMU Emulator User Documentation
qemu-system-sparc64 (1) - QEMU Emulator User Documentation
qemu-system-unicore32 (1) - QEMU Emulator User Documentation
qemu-system-x86_64 (1) - QEMU Emulator User Documentation
qemu-system-xtensa (1) - QEMU Emulator User Documentation
qemu-system-xtensaeb (1) - QEMU Emulator User Documentation
qfcvt (3) - convert a floating-point number to a string
qfcvt_r (3) - convert a floating-point number to a string
qgcvt (3) - convert a floating-point number to a string
qmgr (8postfix) - Postfix queue manager
qmqp-sink (1) - multi-threaded QMQP test server
qmqp-source (1) - multi-threaded QMQP test generator
qmqpd (8postfix) - Postfix QMQP server
qshape (1) - Print Postfix queue domain and age distribution
querybts (1) - view outstanding bug reports on a debbugs server
queue (3) - implementations of lists, tail queues, and circular qu...
RAND_cleanup (3ssl) - erase the PRNG state
RAND_status (3ssl) - add entropy to the PRNG
rarp (8) - manipulate the system RARP table
rasterizer (1) - SVG conversion
rbash (1) - restricted bash, see bash(1)
rbldns (8) - an IP-address-listing DNS server
rbldns-conf (8) - sets up an IP-address-listing DNS service.
rblsmtpd (1) - blocks mail from RBL-listed sites. It works with any S...
rcmd (3) - routines for returning a stream to a remote command
rcmd_af (3) - routines for returning a stream to a remote command
rdate (8) - set the system's date from a remote host
read_abs_bbt (9) - [GENERIC] Read the bad block table starting at a given...
read_abs_bbts (9) - [GENERIC] Read the bad block table(s) for all chips st...
read_bbt (9) - [GENERIC] Read the bad block table starting from page
read_cache_pages (9) - populate an address space with some pages & start read...
read_zsreg (9) - Read a register from a Z85230
readfile (3am) - return the entire contents of a file as a string
Regexp::Common (3pm) - Provide commonly requested regular expressions
Regexp::Common::balanced (3pm) - - provide regexes for strings with balanced ...
Regexp::Common::delimited (3pm) - - provides a regex for delimited strings
Regexp::Common::lingua (3pm) - - provide regexes for language related stuff.
Regexp::Common::list (3pm) - - provide regexes for lists
Regexp::Common::zip (3pm) - - provide regexes for postal codes.
regexp_table (5) - format of Postfix regular expression tables
register_adapter_interrupt (9) - register adapter interrupt handler
register_blkdev (9) - register a new block device
register_chrdev_region (9) - register a range of device numbers
register_filesystem (9) - register a new filesystem
register_framebuffer (9) - registers a frame buffer device
register_netdev (9) - register a network device
register_netdevice (9) - register a network device
register_netdevice_notifier (9) - register a network notifier block
register_sound_dsp (9) - register a DSP device
register_sound_midi (9) - register a midi device
register_sound_mixer (9) - register a mixer device
register_sound_special_device (9) - register a special sound node
register_syscore_ops (9) - Register a set of system core operations.
registerrpc (3) - library routines for remote procedure calls
regulator_bulk_register_supply_alias (9) - register multiple aliases
regulator_bulk_unregister_supply_alias (9) - unregister multiple aliases
regulator_count_voltages (9) - count regulator_list_voltage selectors
regulator_get_hardware_vsel_register (9) - get the HW voltage selector register
regulator_get_linear_step (9) - return the voltage step size between VSEL values
regulator_has_full_constraints (9) - the system has fully specified constraints
regulator_list_hardware_vsel (9) - get the HW-specific register value for a s...
regulator_list_voltage (9) - enumerate supported voltages
regulator_mode_to_status (9) - convert a regulator mode into a status
regulator_register (9) - register regulator
regulator_register_notifier (9) - register regulator event notifier
regulator_register_supply_alias (9) - Provide device alias for supply lookup
regulator_suspend_finish (9) - resume regulators from system wide suspend
regulator_suspend_prepare (9) - prepare regulators for system wide suspend
regulator_sync_voltage (9) - re-apply last regulator output voltage
regulator_unregister (9) - unregister regulator
regulator_unregister_notifier (9) - unregister regulator event notifier
regulator_unregister_supply_alias (9) - Remove device alias
reindexdb (1) - reindex a PostgreSQL database
reinit_completion (9) - reinitialize a completion structure
reiserfsck (8) - The checking tool for the ReiserFS filesystem.
reiserfstune (8) - The tunning tool for the ReiserFS filesystem.
relay_destroy_buf (9) - destroy an rchan_buf struct and associated buffer
relay_destroy_channel (9) - free the channel struct
relay_file_read_start_pos (9) - find the first available byte to read
release_mem_region_adjustable (9) - release a previously reserved memory region
RELEASE_SAVEPOINT (7) - destroy a previously defined savepoint
relocated (5) - Postfix relocated table format
remove-default-wordlist (8) - remove default wordlist
remove-shell (8) - remove shells from the list of valid login shells
replace (1) - a string-replacement utility
Reply::Plugin::TypeTiny (3pm) - improved type constraint exceptions in Reply
report-hw (1) - dump information on the system's hardware
req (1ssl) - PKCS#10 certificate request and certificate generating...
request_any_context_irq (9) - allocate an interrupt line
request_dma (9) - request and reserve a system DMA channel
request_firmware (9) - send firmware request and wait for it
request_firmware_direct (9) - load firmware directly without usermode helper
request_firmware_into_buf (9) - load firmware into a previously allocated buffer
request_firmware_nowait (9) - asynchronous version of request_firmware
request_key (2) - request a key from the kernel's key management facility
request_percpu_irq (9) - allocate a percpu interrupt line
request_resource (9) - request and reserve an I/O or memory resource
request_resource_conflict (9) - request and reserve an I/O or memory resource
request_threaded_irq (9) - allocate an interrupt line
reservation_object_fini (9) - destroys a reservation object
reservation_object_get_list (9) - get the reservation object's shared fence l...
reservation_object_test_signaled_rcu (9) - Test if a reservation object's fen...
resize2fs (8) - ext2/ext3/ext4 file system resizer
resize_reiserfs (8) - resizer tool for the ReiserFS filesystem
resolve_stack_dump (1) - resolve numeric stack trace dump to symbols
resolveip (1) - resolve host name to IP address or vice versa
restart_syscall (2) - restart a system call after interruption by a stop signal
revoutput (3am) - Reverse output strings sample extension
revtwoway (3am) - Reverse strings sample two-way processor extension
rewind (3) - reposition a stream
rewinddir (3) - reset directory stream
rexec (3) - return stream to a remote command
rexec_af (3) - return stream to a remote command
rindex (3) - locate character in string
rint (3) - round to nearest integer
rintf (3) - round to nearest integer
rintl (3) - round to nearest integer
rio_add_mport_pw_handler (9) - add port-write message handler into the list o...
rio_alloc_net (9) - Allocate and initialize a new RIO network data structure
rio_bus_init (9) - Register the RapidIO bus with the device model
rio_clear_locks (9) - Release all host locks and signal enumeration complete
rio_clr_err_stopped (9) - Clears port Error-stopped states.
rio_del_mport_pw_handler (9) - remove port-write message handler from the lis...
rio_destid_alloc (9) - Allocate next available destID for given network
rio_destid_first (9) - return first destID in use
rio_destid_free (9) - free a previously allocated destID
rio_destid_next (9) - return next destID in use
rio_destid_reserve (9) - Reserve the specivied destID
rio_dev_get (9) - Increments the reference count of the RIO device struc...
rio_dev_put (9) - Release a use of the RIO device structure
rio_device_has_destid (9) - Test if a device contains a destination ID register
rio_device_probe (9) - Tell if a RIO device structure has a matching RIO devi...
rio_device_remove (9) - Remove a RIO device from the system
rio_disc_mport (9) - Start discovery through a master port
rio_disc_peer (9) - Recursively discovers a RIO network through a master port
rio_enum_complete (9) - Tests if enumeration of a network is complete
rio_enum_host (9) - Set host lock and initialize host destination ID
rio_enum_mport (9) - Start enumeration through a master port
rio_enum_peer (9) - Recursively enumerate a RIO network through a master port
rio_get_host_deviceid_lock (9) - Reads the Host Device ID Lock CSR on a device
rio_get_input_status (9) - Sends a Link-Request/Input-Status control symbol a...
rio_is_switch (9) - Tests if a RIO device has switch capabilities
rio_lock_device (9) - Acquires host device lock for specified device
rio_match_bus (9) - Tell if a RIO device structure has a matching RIO driv...
rio_match_device (9) - Tell if a RIO device has a matching RIO device id stru...
rio_mport_get_physefb (9) - Helper function that returns register offset for ...
rio_mport_is_active (9) - Tests if master port link is active
rio_pw_enable (9) - Enables/disables port-write handling by a master port
rio_register_driver (9) - register a new RIO driver
rio_register_scan (9) - enumeration/discovery method registration interface
rio_release_dev (9) - Frees a RIO device struct
rio_request_dma (9) - request RapidIO capable DMA channel that supports spec...
rio_request_inb_dbell (9) - request inbound doorbell message service
rio_request_inb_mbox (9) - request inbound mailbox service
rio_request_inb_pwrite (9) - request inbound port-write message service for s...
rio_request_mport_dma (9) - request RapidIO capable DMA channel associated wi...
rio_request_outb_dbell (9) - request outbound doorbell message range
rio_request_outb_mbox (9) - request outbound mailbox service
rio_sport_is_active (9) - Tests if a switch port has an active connection.
rio_std_route_add_entry (9) - Add switch route table entry using standard reg...
rio_std_route_clr_table (9) - Clear swotch route table using standard registe...
rio_std_route_get_entry (9) - Read switch route table entry (port number) ass...
rio_unlock_device (9) - Releases host device lock for specified device
rio_unregister_driver (9) - unregister a RIO driver
rio_unregister_scan (9) - removes enumeration/discovery method from mport
ripemd160 (1ssl) - message digests
rmid (1) - The Java RMI Activation System Daemon
rmiregistry (1) - The Java Remote Object Registry
rnano (1) - Restricted mode for Nano's ANOther editor, an enhanced...
root_device_unregister (9) - unregister and free a root device
round (3) - round to nearest integer, away from zero
roundf (3) - round to nearest integer, away from zero
roundl (3) - round to nearest integer, away from zero
routel (8) - list routes with pretty output format
rpc_alloc_iostats (9) - allocate an rpc_iostats structure
rpc_bind_new_program (9) - bind a new RPC program to an existing client
rpc_clnt_test_and_add_xprt (9) - Test and add a new transport to a rpc_clnt
rpc_clone_client (9) - Clone an RPC client structure
rpc_clone_client_set_auth (9) - Clone an RPC client structure and set its auth
rpc_count_iostats (9) - tally up per-task stats
rpc_count_iostats_metrics (9) - tally up per-task stats
rpc_free_iostats (9) - release an rpc_iostats structure
rpc_init_pipe_dir_head (9) - initialise a struct rpc_pipe_dir_head
rpc_init_pipe_dir_object (9) - initialise a struct rpc_pipe_dir_object
rpc_peeraddr2str (9) - return remote peer address in printable format
rpc_run_task (9) - Allocate a new RPC task, then run rpc_execute against it
rpc_wake_up_status (9) - wake up all rpc_tasks and set their status value.
rpcb_getport_async (9) - obtain the port for a given RPC service on a given host
rpmatch (3) - determine if the answer to a question is affirmative o...
rpntutorial (1) - Reading RRDtool RPN Expressions by Steve Rader
rq_flush_dcache_pages (9) - Helper function to flush all pages in a request
rq_ioc (9) - determine io_context for request allocation
rrdbuild (1) - Instructions for building RRDtool
rrdfirst (1) - Return the date of the first data sample in an RRA wit...
rrdlast (1) - Return the date of the last data sample in an RRD
rrdlastupdate (1) - Return the most recent update to an RRD
rrdrestore (1) - Restore the contents of an RRD from its XML dump format
rrdupdate (1) - Store a new set of values into the RRD
rresvport (3) - routines for returning a stream to a remote command
rresvport_af (3) - routines for returning a stream to a remote command
rsa (3ssl) - RSA public key cryptosystem
RSA_get_ex_data (3ssl) - add application specific data to RSA structures
RSA_get_ex_new_index (3ssl) - add application specific data to RSA structures
RSA_set_ex_data (3ssl) - add application specific data to RSA structures
RSA_sign_ASN1_OCTET_STRING (3ssl) - RSA signatures
RSA_verify_ASN1_OCTET_STRING (3ssl) - RSA signatures
rst-buildhtml (1) - convert many reST documents to HTML
rst2html (1) - convert reST documents to XHTML
rst2latex (1) - convert reST documents to LaTeX
rst2man (1) - generate unix manpages from reStructured text
rst2odt (1) - convert reST documents to OpenDocument text (ODT)
rst2odt_prepstyles (1) - strip paper size specifications off of rst2odt style...
rst2pseudoxml (1) - convert reST documents to pseudo-XML
rst2s5 (1) - convert reST documents to S5 slides
rst2xetex (1) - convert reST documents to XeLaTeX
rst2xml (1) - convert reST documents to XML
rstpep2html (1) - convert reST Python Enhancement Proposals to HTML
rsync (1) - a fast, versatile, remote (and local) file-copying tool
rt_sigreturn (2) - return from signal handler and cleanup stack frame
rtacct (8) - network statistics tools.
rtcwake (8) - enter a system sleep state until specified wakeup time
rtmon (8) - listens to and monitors RTnetlink
rtstat (8) - unified linux network statistics
runuser (1) - run a command with substitute user and group ID
ruserok (3) - routines for returning a stream to a remote command
ruserok_af (3) - routines for returning a stream to a remote command
s2p (1) - a stream editor
s390_runtime_instr (2) - enable/disable s390 CPU run-time instrumentation
sa-awl (1) - examine and manipulate SpamAssassin's auto-whitelist db
sa-awl (1p) - examine and manipulate SpamAssassin's auto-whitelist db
sa1 (8) - Collect and store binary data in the system activity d...
sa2 (8) - Create a report from the current standard system activ...
sadc (8) - System activity data collector.
Safe (3perl) - Compile and execute code in restricted compartments
safe_finger (8) - finger client wrapper that protects against nasty stuf...
samba-regedit (8) - ncurses based tool to manage the Samba registry
samba-tool (8) - Main Samba administration tool.
sar (1) - Collect, report, or save system activity information.
sar.sysstat (1) - Collect, report, or save system activity information.
sas_attach_transport (9) - instantiate SAS transport template
sas_phy_alloc (9) - allocates and initialize a SAS PHY structure
sas_release_transport (9) - release SAS transport template instance
sas_remove_children (9) - tear down a devices SAS data structures
sas_remove_host (9) - tear down a Scsi_Host's SAS data structures
sata_down_spd_limit (9) - adjust SATA spd limit downward
sata_link_debounce (9) - debounce SATA phy status
sata_lpm_ignore_phy_events (9) - test if PHY event should be ignored
sata_print_link_status (9) - Print SATA link status
sata_scr_read (9) - read SCR register of the specified port
sata_scr_valid (9) - test whether SCRs are accessible
sata_scr_write (9) - write SCR register of the specified port
sata_scr_write_flush (9) - write SCR register of the specified port and flush
sata_std_hardreset (9) - COMRESET w/o waiting or classification
saxon-xslt (1) - Apply a given style sheet to a given source XML document
sb_start_pagefault (9) - get write access to a superblock from a page fault
sb_start_write (9) - get write access to a superblock
scache (8postfix) - Postfix shared connection cache server
sched_get_priority_max (2) - get static priority range
sched_get_priority_min (2) - get static priority range
scnprintf (9) - Format a string and place it in a buffer
SCPNT_TO_LOOKUP_IDX (9) - searches for a given scmd in the ScsiLookup[] array...
screendump (1) - dump the contents of a virtual console to stdout
scsi_add_host_with_dma (9) - add a scsi host with dma device
scsi_add_single_device (9) - Respond to user request to probe for/add device
scsi_alloc_target (9) - allocate a new or find an existing target
scsi_bios_ptable (9) - Read PC partition table out of first sector of device.
scsi_dev_info_list_add (9) - add one dev_info list entry.
scsi_dev_info_list_add_str (9) - parse dev_list and add to the scsi_dev_info_...
scsi_dev_info_list_find (9) - find a matching dev_info list entry.
scsi_device_lookup (9) - find a device given the host
scsi_device_resume (9) - Restart user issued commands to a quiesced device.
scsi_device_set_state (9) - Take the given device through the device state mo...
scsi_device_supports_vpd (9) - test if a device supports VPD pages
scsi_dma_map (9) - perform DMA mapping against command's sg lists
scsi_dma_unmap (9) - unmap command's sg lists mapped by scsi_dma_map
scsi_eh_ready_devs (9) - check device ready state and recover if not.
scsi_eh_restore_cmnd (9) - Restore a scsi command info as part of error recovery
scsi_execute (9) - insert request and wait for the result
scsi_exit_devinfo (9) - remove /proc/scsi/device_info & the scsi_dev_info_list
scsi_flush_work (9) - Flush a Scsi_Host's workqueue.
scsi_get_device_flags (9) - get device specific flags from the dynamic device...
scsi_host_alloc (9) - register a scsi host adapter instance.
scsi_host_get (9) - inc a Scsi_Host ref count
scsi_host_lookup (9) - get a reference to a Scsi_Host by host no
scsi_host_put (9) - dec a Scsi_Host ref count
scsi_host_set_state (9) - Take the given host through the host state model.
scsi_init_devinfo (9) - set up the dynamic device list.
scsi_inq_str (9) - print INQUIRY data from min to max index, strip traili...
scsi_internal_device_block (9) - internal function to put a device temporaril...
scsi_internal_device_unblock (9) - resume a device after a block request
scsi_is_sas_phy (9) - check if a struct device represents a SAS PHY
scsi_is_sas_port (9) - check if a struct device represents a SAS port
scsi_is_sas_rphy (9) - check if a struct device represents a SAS remote PHY
scsi_netlink_exit (9) - Called by SCSI subsystem to disable the SCSI transpor...
scsi_netlink_init (9) - Called by SCSI subsystem to initialize the SCSI trans...
scsi_proc_host_add (9) - Add entry for this host to appropriate /proc dir
scsi_proc_host_rm (9) - remove this host's entry from /proc
scsi_proc_hostdir_add (9) - Create directory in /proc for a scsi host
scsi_proc_hostdir_rm (9) - remove directory in /proc for a scsi host
scsi_queue_work (9) - Queue work to the Scsi_Host workqueue.
scsi_remove_device (9) - unregister a device from the scsi bus
scsi_remove_host (9) - remove a scsi host
scsi_remove_single_device (9) - Respond to user request to remove a device
scsi_schedule_eh (9) - schedule EH for SCSI host
scsi_target_reap (9) - check to see if target is in use and destroy if not
scsi_test_unit_ready (9) - test if unit is ready
scsi_track_queue_full (9) - track QUEUE_FULL events to adjust queue depth
sctp_test (1) - Send and receive messages via SCTP
securetty (5) - file which lists terminals from which root can log in
security (2) - unimplemented system calls
security_av_perm_to_string (3) - convert between SELinux class and permission...
security_av_string (3) - convert between SELinux class and permission values ...
security_class_to_string (3) - convert between SELinux class and permission v...
security_deny_unknown (3) - get or set the enforcing state of SELinux
security_getenforce (3) - get or set the enforcing state of SELinux
security_setenforce (3) - get or set the enforcing state of SELinux
securityfs_create_dir (9) - create a directory in the securityfs filesystem
securityfs_create_file (9) - create a file in the securityfs filesystem
securityfs_remove (9) - removes a file or directory from the securityfs files...
sed (1) - stream editor for filtering and transforming text
seed48 (3) - generate uniformly distributed pseudo-random numbers
seed48_r (3) - generate uniformly distributed pseudo-random numbers r...
seekdir (3) - set the position of the next readdir() call in the dir...
selabel_lookup (3) - obtain SELinux security context from a string label
selabel_lookup_raw (3) - obtain SELinux security context from a string label
selabel_stats (3) - obtain SELinux labeling statistics
select-default-wordlist (8) - select default wordlist
select-editor (1) - select your default sensible-editor from all installed...
SelectSaver (3perl) - save and restore selected file handle
selinux_getenforcemode (3) - get the enforcing state of SELinux
selinux_getpolicytype (3) - get the type of SELinux policy running on the system
selinux_lsetfilecon_default (3) - set the file context to the system defaults
selinux_raw_context_to_color (3) - Return RGB color string for an SELinux sec...
selinux_set_mapping (3) - establish dynamic object class and permission mapping
selinux_status_close (3) - reference the SELinux kernel status without invoca...
selinux_status_deny_unknown (3) - reference the SELinux kernel status without...
selinux_status_getenforce (3) - reference the SELinux kernel status without i...
selinux_status_open (3) - reference the SELinux kernel status without invocat...
selinux_status_policyload (3) - reference the SELinux kernel status without i...
selinux_status_updated (3) - reference the SELinux kernel status without invo...
sem_destroy (3) - destroy an unnamed semaphore
sem_post (3) - unlock a semaphore
semctl (2) - System V semaphore control operations
semget (2) - get a System V semaphore set identifier
semop (2) - System V semaphore operations
semtimedop (2) - System V semaphore operations
SendEventAck (9) - Send EventAck request to MPT adapter.
SendEventNotification (9) - Send EventNotification (on or off) request to ada...
SendIocInit (9) - Send IOCInit request to MPT adapter.
SendIocReset (9) - Send IOCReset request to MPT adapter.
sendmail (1) - Postfix to Sendmail compatibility interface
SendPortEnable (9) - Send PortEnable request to MPT adapter port.
seq_escape (9) - print string into buffer, escaping some characters
seq_hlist_next (9) - move to the next position of the hlist
seq_hlist_next_percpu (9) - move to the next position of the percpu hlist array
seq_hlist_next_rcu (9) - move to the next position of the hlist protected by RCU
seq_hlist_start (9) - start an iteration of a hlist
seq_hlist_start_head (9) - start an iteration of a hlist
seq_hlist_start_head_rcu (9) - start an iteration of a hlist protected by RCU
seq_hlist_start_percpu (9) - start an iteration of a percpu hlist array
seq_hlist_start_rcu (9) - start an iteration of a hlist protected by RCU
seq_release (9) - free the structures associated with sequential file.
serial8250_get_port (9) - retrieve struct uart_8250_port
serial8250_register_8250_port (9) - register a serial port
serial8250_unregister_port (9) - remove a 16x50 serial port at runtime
service (8) - run a System V init script
services (5) - Internet network services list
SET_CONSTRAINTS (7) - set constraint check timing for the current transaction
set_dma_reserve (9) - set the specified number of pages reserved in the firs...
set_pfnblock_flags_mask (9) - Set the requested group of flags for a pagebloc...
set_restore_sigmask (9) - make sure saved_sigmask processing gets done
set_robust_list (2) - get/set list of robust futexes
set_thread_area (2) - set a thread local storage (TLS) area
SET_TRANSACTION (7) - set the characteristics of the current transaction
setfacl (1) - set file access control lists
setfscreatecon (3) - get or set the SELinux security context used for creat...
setfscreatecon_raw (3) - get or set the SELinux security context used for cre...
setfsent (3) - handle fstab entries
setfsgid (2) - set group identity used for filesystem checks
setfsgid32 (2) - set group identity used for filesystem checks
setfsuid (2) - set user identity used for filesystem checks
setfsuid32 (2) - set user identity used for filesystem checks
setgroups (2) - get/set list of supplementary group IDs
setgroups32 (2) - get/set list of supplementary group IDs
sethostent (3) - get network host entry
sethostid (2) - get or set the unique identifier of the current host
sethostid (3) - get or set the unique identifier of the current host
sethostname (2) - get/set hostname
setmntent (3) - get filesystem descriptor file entry
setstate (3) - random number generator
setstate_r (3) - reentrant random number generator
setup (2) - setup devices and filesystems, mount root filesystem
setvtrgb (1) - customize the console color map
sftp-server (8) - SFTP server subsystem
sh.distrib (1) - command interpreter (shell)
sha (1ssl) - message digests
sha1 (1ssl) - message digests
sha1sum (1) - compute and check SHA1 message digest
sha224 (1ssl) - message digests
sha224sum (1) - compute and check SHA224 message digest
sha256 (1ssl) - message digests
sha256sum (1) - compute and check SHA256 message digest
sha384 (1ssl) - message digests
sha384sum (1) - compute and check SHA384 message digest
sha512 (1ssl) - message digests
sha512sum (1) - compute and check SHA512 message digest
sheep (8) - Distributed Block Storage System for QEMU
sheepfs (8) - A pseudo file system exports both Sheepdog's internal ...
shmat (2) - System V shared memory operations
shmctl (2) - System V shared memory control
shmdt (2) - System V shared memory operations
shmget (2) - allocates a System V shared memory segment
shmop (2) - System V shared memory operations
shost_for_each_device (9) - iterate over all devices of a host
showq (8postfix) - list the Postfix mail queue
shtool-install (1) - GNU shtool install(1) command
shtool-mdate (1) - GNU shtool pretty-print last modification time
shtool-mkdir (1) - GNU shtool mkdir(1) style command
shtool-subst (1) - GNU shtool sed(1) substitution operations
shtool-table (1) - GNU shtool pretty-print a field-separated list
shtool-tarball (1) - GNU shtool command for rolling standardized tarballs
sigaltstack (2) - set and/or get signal stack context
sigevent (7) - structure for notification from asynchronous routines
sighold (3) - System V signal API
sigignore (3) - System V signal API
siglongjmp (3) - nonlocal jump to a saved stack context
signbit (3) - test sign of a real floating-point number
sigrelse (3) - System V signal API
sigreturn (2) - return from signal handler and cleanup stack frame
sigset (3) - System V signal API
sigstack (3) - set and/or get signal stack context
sil_dev_config (9) - Apply device/host-specific errata fixups
simple_strtol (9) - convert a string to a signed long
simple_strtoll (9) - convert a string to a signed long long
simple_strtoul (9) - convert a string to an unsigned long
simple_strtoull (9) - convert a string to an unsigned long long
single_erase (9) - [GENERIC] NAND standard block erase command function
size (1) - list section sizes and total size.
sk_capable (9) - Socket global capability test
sk_for_each_entry_offset_rcu (9) - iterate over a list at a given struct offset
sk_has_allocations (9) - check if allocations are outstanding
sk_net_capable (9) - Network namespace socket capability test
sk_ns_capable (9) - General socket capability test
sk_state_load (9) - read sk->sk_state for lockless contexts
sk_state_store (9) - update sk->sk_state
sk_stream_wait_connect (9) - Wait for a socket to get into the connected state
sk_stream_wait_memory (9) - Wait for more memory for a socket
sk_stream_write_space (9) - stream socket write_space callback.
skb_dst (9) - returns skb dst_entry
skb_dst_is_noref (9) - Test if skb dst isn't refcounted
skb_dst_set (9) - sets skb dst
skb_dst_set_noref (9) - sets skb dst, hopefully, without taking reference
skb_get_timestamp (9) - get timestamp from a skb
skb_mstamp_get (9) - get current timestamp
skb_mstamp_us_delta (9) - compute the difference in usec between two skb_mstamp
skb_postpull_rcsum (9) - update checksum for received skb after pull
skb_postpush_rcsum (9) - update checksum for received skb after push
skb_pull (9) - remove data from the start of a buffer
skb_push (9) - add data to the start of a buffer
skb_queue_head (9) - queue a buffer at the list head
skb_queue_is_first (9) - check if skb is the first entry in the queue
skb_queue_is_last (9) - check if skb is the last entry in the queue
skb_queue_purge (9) - empty a list
skb_queue_splice (9) - join two skb lists, this is designed for stacks
skb_queue_splice_init (9) - join two skb lists and reinitialise the emptied list
skb_queue_splice_tail (9) - join two skb lists, each list being a queue
skb_queue_splice_tail_init (9) - join two skb lists and reinitialise the empt...
skb_queue_tail (9) - queue a buffer at the list tail
skb_reserve (9) - adjust headroom
skb_store_bits (9) - store bits from kernel buffer to skb
skb_tailroom_reserve (9) - adjust reserved_tailroom
skb_tx_timestamp (9) - Driver hook for transmit timestamping
skb_unlink (9) - remove a buffer from a list
skcipher_request_alloc (9) - allocate request data structure
skcipher_request_free (9) - zeroize and free request data structure
skcipher_request_set_callback (9) - set asynchronous callback function
skcipher_request_set_crypt (9) - set data buffers
skcipher_request_set_tfm (9) - update cipher handle reference in request
skill (1) - send a signal or report process status
skip_spaces (9) - Removes leading whitespace from str.
slabinfo (5) - kernel slab allocator statistics
slapacl (8) - Check access to a list of attributes.
slapauth (8) - Check a list of string-represented IDs for LDAP authc/...
slapd (8) - Stand-alone LDAP Daemon
slapd.access (5) - access configuration for slapd, the stand-alone LDAP d...
slapd.backends (5) - backends for slapd, the stand-alone LDAP daemon
slapd.conf (5) - configuration file for slapd, the stand-alone LDAP daemon
slapd.overlays (5) - overlays for slapd, the stand-alone LDAP daemon
slapd.plugin (5) - plugin configuration for slapd, the stand-alone LDAP d...
slapdn (8) - Check a list of string-represented LDAP DNs based on s...
slapo-constraint (5) - Attribute Constraint Overlay to slapd
slapo-dynlist (5) - Dynamic List overlay to slapd
slapo-sssvlv (5) - Server Side Sorting and Virtual List View overlay to s...
slaptest (8) - Check the suitability of the OpenLDAP slapd configuration
SMIME_write_CMS (3ssl) - convert CMS structure to S/MIME format.
SMIME_write_PKCS7 (3ssl) - convert PKCS#7 structure to S/MIME format.
smtp (8postfix) - Postfix SMTP+LMTP client
smtp-sink (1) - multi-threaded SMTP/LMTP test server
smtp-source (1) - multi-threaded SMTP/LMTP test generator
smtpd (8postfix) - Postfix SMTP server
snd_ac97_pcm_assign (9) - assign AC97 slots to given PCM streams
snd_ac97_pcm_double_rate_rules (9) - set double rate constraints
snd_ac97_read (9) - read a value from the given register
snd_ac97_update (9) - update the value on the given register
snd_ac97_update_bits (9) - update the bits on the given register
snd_ac97_update_power (9) - update the powerdown register
snd_ac97_write (9) - write a value on the given register
snd_ac97_write_cache (9) - write a value on the given register and update the...
snd_BUG (9) - give a BUG warning message and stack trace
snd_card_file_add (9) - add the file to the file list of the card
snd_card_file_remove (9) - remove the file from the file list
snd_card_free (9) - frees given soundcard structure
snd_card_new (9) - create and initialize a soundcard structure
snd_card_register (9) - register the soundcard
snd_component_add (9) - add a component string
snd_compress_register (9) - register compressed device
snd_ctl_add (9) - add the control instance to the card
snd_ctl_add_vmaster_hook (9) - Add a hook to a vmaster control
snd_ctl_boolean_mono_info (9) - Helper function for a standard boolean info c...
snd_ctl_boolean_stereo_info (9) - Helper function for a standard boolean info...
snd_ctl_enum_info (9) - fills the info structure for an enumerated control
snd_ctl_find_id (9) - find the control instance with the given id
snd_ctl_find_numid (9) - find the control instance with the given number-id
snd_ctl_free_one (9) - release the control instance
snd_ctl_make_virtual_master (9) - Create a virtual master control
snd_ctl_new1 (9) - create a control instance from the template
snd_ctl_register_ioctl (9) - register the device-specific control-ioctls
snd_ctl_register_ioctl_compat (9) - register the device-specific 32bit compat...
snd_ctl_replace (9) - replace the control instance of the card
snd_ctl_sync_vmaster (9) - Sync the vmaster slaves and hook
snd_ctl_unregister_ioctl (9) - de-register the device-specific control-ioctls
snd_ctl_unregister_ioctl_compat (9) - de-register the device-specific compat ...
snd_device_initialize (9) - Initialize struct device for sound devices
snd_device_register (9) - register the device
snd_dma_disable (9) - stop the ISA DMA transfer
snd_dmaengine_pcm_close (9) - Close a dmaengine based PCM substream
snd_dmaengine_pcm_close_release_chan (9) - Close a dmaengine based PCM substr...
snd_dmaengine_pcm_open (9) - Open a dmaengine based PCM substream
snd_dmaengine_pcm_open_request_chan (9) - Open a dmaengine based PCM substrea...
snd_dmaengine_pcm_register (9) - Register a dmaengine based PCM device
snd_dmaengine_pcm_request_channel (9) - Request channel for the dmaengine PCM
snd_dmaengine_pcm_unregister (9) - Removes a dmaengine based PCM device
snd_hwdep_new (9) - create a new hwdep instance
snd_info_get_str (9) - parse a string token
snd_info_register (9) - register the info entry
snd_interval_list (9) - refine the interval value from the list
snd_interval_ranges (9) - refine the interval value from the list of ranges
snd_jack_report (9) - Report the current status of a jack
snd_lookup_minor_data (9) - get user data of a registered device
snd_mpu401_uart_new (9) - create an MPU401-UART instance
snd_pcm_chmap_substream (9) - get the PCM substream assigned to the given chm...
snd_pcm_format_name (9) - Return a name string for the given PCM format
snd_pcm_gettime (9) - Fill the timespec depending on the timestamp mode
snd_pcm_group_for_each_entry (9) - iterate over the linked substreams
snd_pcm_hw_constraint_integer (9) - apply an integer constraint to an interval
snd_pcm_hw_constraint_list (9) - apply a list of constraints to a parameter
snd_pcm_hw_constraint_mask64 (9) - apply the given bitmap mask constraint
snd_pcm_hw_constraint_minmax (9) - apply a min/max range constraint to an int...
snd_pcm_hw_constraint_msbits (9) - add a hw constraint msbits rule
snd_pcm_hw_constraint_pow2 (9) - add a hw constraint power-of-2 rule
snd_pcm_hw_constraint_ranges (9) - apply list of range constraints to a param...
snd_pcm_hw_constraint_ratdens (9) - apply ratdens constraint to a parameter
snd_pcm_hw_constraint_ratnums (9) - apply ratnums constraint to a parameter
snd_pcm_hw_constraint_single (9) - Constrain parameter to a single value
snd_pcm_hw_constraint_step (9) - add a hw constraint step rule
snd_pcm_hw_param_first (9) - refine config space and return minimum value
snd_pcm_hw_param_last (9) - refine config space and return maximum value
snd_pcm_hw_rule_add (9) - add the hw-constraint rule
snd_pcm_lib_get_vmalloc_page (9) - map vmalloc buffer offset to page struct
snd_pcm_lib_preallocate_pages_for_all (9) - pre-allocation for continuous mem...
snd_pcm_new (9) - create a new PCM instance
snd_pcm_new_internal (9) - create a new internal PCM instance
snd_pcm_new_stream (9) - create a new PCM stream
snd_pcm_notify (9) - Add/remove the notify list
snd_pcm_period_elapsed (9) - update the pcm status for the next period
snd_pcm_playback_data (9) - check whether any data exists on the playback buffer
snd_pcm_running (9) - Check whether the substream is in a running state
snd_pcm_sgbuf_ops_page (9) - get the page struct at the given offset
snd_pcm_stop (9) - try to stop all running streams in the substream group
snd_pcm_stop_xrun (9) - stop the running streams as XRUN
snd_pcm_stream_linked (9) - Check whether the substream is linked with others
snd_pcm_stream_lock (9) - Lock the PCM stream
snd_pcm_stream_lock_irq (9) - Lock the PCM stream
snd_pcm_stream_lock_irqsave (9) - Lock the PCM stream
snd_pcm_stream_str (9) - Get a string naming the direction of a stream
snd_pcm_stream_unlock (9) - Unlock the PCM stream
snd_pcm_stream_unlock_irq (9) - Unlock the PCM stream
snd_pcm_stream_unlock_irqrestore (9) - Unlock the PCM stream
snd_pcm_substream_to_dma_direction (9) - Get dma_transfer_direction for a PCM...
snd_pcm_suspend (9) - trigger SUSPEND to all linked streams
snd_pcm_suspend_all (9) - trigger SUSPEND to all substreams in the given pcm
snd_pcm_trigger_done (9) - Mark the master substream
snd_power_wait (9) - wait until the power-state is changed.
snd_rawmidi_new (9) - create a rawmidi instance
snd_register_device (9) - Register the ALSA device file for the card
snd_request_card (9) - try to load the card module
snd_soc_add_card_controls (9) - add an array of controls to a SoC card. Conve...
snd_soc_add_codec_controls (9) - add an array of controls to a codec. Conveni...
snd_soc_add_dai_controls (9) - add an array of controls to a DAI. Convienienc...
snd_soc_add_platform_controls (9) - add an array of controls to a platform. C...
snd_soc_cache_sync (9) - Sync the register cache with the hardware
snd_soc_codec_exit_regmap (9) - De-initialize regmap instance for the CODEC
snd_soc_codec_init_regmap (9) - Initialize regmap instance for the CODEC
snd_soc_codec_set_sysclk (9) - configure CODEC system or master clock.
snd_soc_component_exit_regmap (9) - De-initialize regmap instance for the com...
snd_soc_component_init_regmap (9) - Initialize regmap instance for the component
snd_soc_component_read (9) - Read register value
snd_soc_component_test_bits (9) - Test register for change
snd_soc_component_to_codec (9) - Casts a component to the CODEC it is embedde...
snd_soc_component_to_platform (9) - Casts a component to the platform it is e...
snd_soc_component_write (9) - Write register value
snd_soc_dai_digital_mute (9) - configure DAI system or master clock.
snd_soc_dai_set_sysclk (9) - configure DAI system or master clock.
snd_soc_dai_set_tristate (9) - configure DAI system or master clock.
snd_soc_dapm_get_pin_status (9) - get audio pin status
snd_soc_dapm_ignore_suspend (9) - ignore suspend status for DAPM endpoint
snd_soc_dapm_to_codec (9) - Casts a DAPM context to the CODEC it is embedded in
snd_soc_dapm_to_component (9) - Casts a DAPM context to the component it is e...
snd_soc_dapm_to_platform (9) - Casts a DAPM context to the platform it is emb...
snd_soc_find_dai (9) - Find a registered DAI
snd_soc_get_strobe (9) - strobe get callback
snd_soc_get_xr_sx (9) - signed multi register get callback
snd_soc_info_xr_sx (9) - signed multi register info callback
snd_soc_jack_notifier_register (9) - Register a notifier for jack status
snd_soc_jack_notifier_unregister (9) - Unregister a notifier for jack status
snd_soc_jack_report (9) - Report the current status for a jack
snd_soc_kcontrol_codec (9) - Returns the CODEC that registered the control
snd_soc_kcontrol_component (9) - Returns the component that registered the co...
snd_soc_kcontrol_platform (9) - Returns the platform that registered the control
snd_soc_limit_volume (9) - Set new limit to an existing volume control.
snd_soc_put_strobe (9) - strobe put callback
snd_soc_put_xr_sx (9) - signed multi register get callback
snd_soc_register_card (9) - Register a card with the ASoC core
snd_soc_register_codec (9) - Register a codec with the ASoC core
snd_soc_register_dai (9) - Register a DAI dynamically & create its widgets
snd_soc_register_platform (9) - Register a platform with the ASoC core
snd_soc_remove_dai_link (9) - Remove a DAI link from the list
snd_soc_test_bits (9) - test register for change
snd_soc_unregister_card (9) - Unregister a card with the ASoC core
snd_soc_unregister_codec (9) - Unregister a codec from the ASoC core
snd_soc_unregister_component (9) - Unregister a component from the ASoC core
snd_soc_unregister_platform (9) - Unregister a platform from the ASoC core
snd_soc_update_bits (9) - update codec register bits
snd_unregister_device (9) - unregister the device on the given card
snice (1) - send a signal or report process status
snprintf (9) - Format a string and place it in a buffer
sock_register (9) - add a socket protocol handler
sock_tx_timestamp (9) - checks whether the outgoing packet is to be time stamped
sock_unregister (9) - remove a protocol handler
Socket6 (3pm) - IPv6 related part of the C socket.h defines and struct...
socketcall (2) - socket system calls
socketmap_table (5) - Postfix socketmap table lookup client
soelim (1) - interpret .so requests in groff input
sources.list (5) - List of configured APT data sources
spawn (8postfix) - Postfix external command spawner
spawn-fcgi (1) - Spawns FastCGI processes
speed (1ssl) - test library performance
spi_alloc_master (9) - allocate SPI master controller
spi_busnum_to_master (9) - look up master associated with bus_num
SPI_cursor_find (3) - find an existing cursor by name
SPI_cursor_open (3) - set up a cursor using a statement created with SPI_pre...
SPI_cursor_open_with_paramlist (3) - set up a cursor using parameters
SPI_execp (3) - execute a statement in read/write mode
SPI_execute_plan (3) - execute a statement prepared by SPI_prepare
SPI_execute_plan_with_paramlist (3) - execute a statement prepared by SPI_pre...
SPI_freeplan (3) - free a previously saved prepared statement
SPI_getargcount (3) - return the number of arguments needed by a statement p...
SPI_getargtypeid (3) - return the data type OID for an argument of a statemen...
SPI_getvalue (3) - return the string value of the specified column
SPI_is_cursor_plan (3) - return true if a statement prepared by SPI_prepare c...
SPI_keepplan (3) - save a prepared statement
spi_new_device (9) - instantiate one new SPI device
SPI_prepare (3) - prepare a statement, without executing it yet
SPI_prepare_cursor (3) - prepare a statement, without executing it yet
SPI_prepare_params (3) - prepare a statement, without executing it yet
spi_register_board_info (9) - register SPI devices for a given board
spi_register_master (9) - register SPI master controller
SPI_register_relation (3) - make an ephemeral named relation available by nam...
SPI_register_trigger_data (3) - make ephemeral trigger data available in SPI ...
spi_replace_transfers (9) - replace transfers with several transfers and regi...
SPI_result_code_string (3) - return error code as string
SPI_saveplan (3) - save a prepared statement
SPI_start_transaction (3) - start a new transaction
spi_unregister_device (9) - unregister a single SPI device
spi_unregister_driver (9) - reverse effect of spi_register_driver
spi_unregister_master (9) - unregister SPI master controller
SPI_unregister_relation (3) - remove an ephemeral named relation from the reg...
splice_from_pipe_begin (9) - start splicing from pipe
split-logfile (8) - Split combined virtual hosts access log into one file ...
sprintf (9) - Format a string and place it in a buffer
spufs (7) - SPU filesystem
sq (1) - squeeze or unsqueeze a sorted word list
sq_remap (9) - Map a physical address through the Store Queues
sq_unmap (9) - Unmap a Store Queue allocation
sqlite_table (5) - Postfix SQLite configuration
srand48 (3) - generate uniformly distributed pseudo-random numbers
srand48_r (3) - generate uniformly distributed pseudo-random numbers r...
srp_attach_transport (9) - instantiate SRP transport template
srp_release_transport (9) - release SRP transport template instance
srp_remove_host (9) - tear down a Scsi_Host's SRP data structures
srp_start_tl_fail_timers (9) - start the transport layer failure timers
srp_stop_rport_timers (9) - stop the transport layer recovery timers
ss (8) - another utility to investigate sockets
sscanf (9) - Unformat a buffer into a list of arguments
ssh-argv0 (1) - replaces the old ssh command-name as hostname handling
ssh-keysign (8) - ssh helper program for host-based authentication
SSL_add_client_CA (3ssl) - set list of CAs sent to the client when requesting...
SSL_alert_desc_string (3ssl) - get textual description of alert information
SSL_alert_desc_string_long (3ssl) - get textual description of alert information
SSL_alert_type_string (3ssl) - get textual description of alert information
SSL_alert_type_string_long (3ssl) - get textual description of alert information
SSL_CTX_add_client_CA (3ssl) - set list of CAs sent to the client when reques...
SSL_CTX_get_cert_store (3ssl) - manipulate X509 certificate verification storage
SSL_CTX_get_client_CA_list (3ssl) - get list of client CAs
SSL_CTX_get_max_cert_list (3ssl) - manipulate allowed for the peer's certific...
SSL_CTX_load_verify_locations (3ssl) - set default locations for trusted CA c...
SSL_CTX_sess_accept (3ssl) - obtain session cache statistics
SSL_CTX_sess_accept_good (3ssl) - obtain session cache statistics
SSL_CTX_sess_accept_renegotiate (3ssl) - obtain session cache statistics
SSL_CTX_sess_cache_full (3ssl) - obtain session cache statistics
SSL_CTX_sess_cb_hits (3ssl) - obtain session cache statistics
SSL_CTX_sess_connect (3ssl) - obtain session cache statistics
SSL_CTX_sess_connect_good (3ssl) - obtain session cache statistics
SSL_CTX_sess_connect_renegotiate (3ssl) - obtain session cache statistics
SSL_CTX_sess_hits (3ssl) - obtain session cache statistics
SSL_CTX_sess_misses (3ssl) - obtain session cache statistics
SSL_CTX_sess_number (3ssl) - obtain session cache statistics
SSL_CTX_sess_timeouts (3ssl) - obtain session cache statistics
SSL_CTX_set_cert_store (3ssl) - manipulate X509 certificate verification storage
SSL_CTX_set_cipher_list (3ssl) - choose list of available SSL_CIPHERs
SSL_CTX_set_client_CA_list (3ssl) - set list of CAs sent to the client when r...
SSL_CTX_set_max_cert_list (3ssl) - manipulate allowed for the peer's certific...
SSL_CTX_set_msg_callback (3ssl) - install callback for observing protocol mes...
SSL_CTX_set_msg_callback_arg (3ssl) - install callback for observing protocol...
SSL_CTX_set_tlsext_status_arg (3ssl) - OCSP Certificate Status Request functions
SSL_CTX_set_tlsext_status_cb (3ssl) - OCSP Certificate Status Request functions
SSL_free (3ssl) - free an allocated SSL structure
SSL_get_accept_state (3ssl) - prepare SSL object to work in client or server ...
SSL_get_cipher_list (3ssl) - get list of available SSL_CIPHERs
SSL_get_ciphers (3ssl) - get list of available SSL_CIPHERs
SSL_get_client_CA_list (3ssl) - get list of client CAs
SSL_get_ex_data_X509_STORE_CTX_idx (3ssl) - get ex_data index to access SSL s...
SSL_get_max_cert_list (3ssl) - manipulate allowed for the peer's certificate ...
SSL_get_msg_callback_arg (3ssl) - install callback for observing protocol mes...
SSL_get_shutdown (3ssl) - manipulate shutdown state of an SSL connection
SSL_get_tlsext_status_ocsp_resp (3ssl) - OCSP Certificate Status Request func...
SSL_library_init (3ssl) - initialize SSL library by registering algorithms
SSL_load_error_strings (3ssl) - load and free error strings
SSL_new (3ssl) - create a new SSL structure for a connection
SSL_rstate_string (3ssl) - get textual description of state of an SSL object ...
SSL_rstate_string_long (3ssl) - get textual description of state of an SSL ob...
SSL_SESSION_free (3ssl) - free an allocated SSL_SESSION structure
SSL_set_cipher_list (3ssl) - choose list of available SSL_CIPHERs
SSL_set_client_CA_list (3ssl) - set list of CAs sent to the client when reque...
SSL_set_connect_state (3ssl) - prepare SSL object to work in client or server...
SSL_set_max_cert_list (3ssl) - manipulate allowed for the peer's certificate ...
SSL_set_msg_callback (3ssl) - install callback for observing protocol messages
SSL_set_shutdown (3ssl) - manipulate shutdown state of an SSL connection
SSL_set_tlsext_status_ocsp_resp (3ssl) - OCSP Certificate Status Request func...
SSL_set_tlsext_status_type (3ssl) - OCSP Certificate Status Request functions
SSL_state_string (3ssl) - get textual description of state of an SSL object
SSL_state_string_long (3ssl) - get textual description of state of an SSL object
SSL_want (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_nothing (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_read (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_write (3ssl) - obtain state information TLS/SSL I/O operation
SSL_want_x509_lookup (3ssl) - obtain state information TLS/SSL I/O operation
SSLeay_add_ssl_algorithms (3ssl) - initialize SSL library by registering algo...
st (4) - SCSI tape device
standards (7) - C and UNIX Standards
starget_for_each_device (9) - helper to walk all devices of a target
start-stop-daemon (8) - start and stop system daemon programs
START_TRANSACTION (7) - start a transaction block
startpar (8) - start runlevel scripts in parallel
startpar-upstart-inject (8) - notify startpar of started/stopped upstart jobs
stat (1) - display file or file system status
stat (2) - get file status
stat64 (2) - get file status
statfs (2) - get filesystem statistics
statfs64 (2) - get filesystem statistics
statvfs (2) - get filesystem statistics
statvfs (3) - get filesystem statistics
stdarg (3) - variable argument lists
stdbuf (1) - Run COMMAND, with modified buffering operations for it...
stderr (3) - standard I/O streams
stdin (3) - standard I/O streams
stdio (3) - standard input/output library functions
stdio_ext (3) - interfaces to stdio FILE structure
stdout (3) - standard I/O streams
stime (2) - set time
Storable (3perl) - persistence for Perl data structures
stpcpy (3) - copy a string returning a pointer to its end
stpncpy (3) - copy a fixed-size string, returning a pointer to its end
strcasecmp (3) - compare two strings ignoring case
strcasestr (3) - locate a substring
strcat (3) - concatenate two strings
strcat (9) - Append one NUL-terminated string to another
strchr (3) - locate character in string
strchr (9) - Find the first occurrence of a character in a string
strchrnul (3) - locate character in string
strchrnul (9) - Find and return a character in a string, or end of string
strcmp (3) - compare two strings
strcmp (9) - Compare two strings
strcoll (3) - compare two strings using the current locale
strcpy (3) - copy a string
strcpy (9) - Copy a NUL terminated string
strcspn (3) - get length of a prefix substring
strcspn (9) - Calculate the length of the initial substring of s whi...
strdup (3) - duplicate a string
strdupa (3) - duplicate a string
strerror (3) - return string describing error number
strerror_r (3) - return string describing error number
strfmon (3) - convert monetary value to a string
strfry (3) - randomize a string
strftime (3) - format date and time
strict (3perl) - Perl pragma to restrict unsafe constructs
strictures (3pm) - turn on strict and make all warnings fatal
strim (9) - Removes leading and trailing whitespace from s.
string (3) - string operations
string_to_av_perm (3) - convert between SELinux class and permission values a...
string_to_security_class (3) - convert between SELinux class and permission v...
strings (1) - print the strings of printable characters in files.
strip (1) - Discard symbols from object files.
strlcat (9) - Append a length-limited, C-string to another
strlcpy (9) - Copy a C-string into a sized buffer
strlen (3) - calculate the length of a string
strlen (9) - Find the length of a string
strncasecmp (3) - compare two strings ignoring case
strncasecmp (9) - Case insensitive, length-limited string comparison
strncat (3) - concatenate two strings
strncat (9) - Append a length-limited, C-string to another
strnchr (9) - Find a character in a length limited string
strncmp (3) - compare two strings
strncmp (9) - Compare two length-limited strings
strncpy (3) - copy a string
strncpy (9) - Copy a length-limited, C-string
strndup (3) - duplicate a string
strndupa (3) - duplicate a string
strnlen (3) - determine the length of a fixed-size string
strnlen (9) - Find the length of a length-limited string
strnstr (9) - Find the first substring in a length-limited string
strpbrk (3) - search a string for any of a set of bytes
strpbrk (9) - Find the first occurrence of a set of characters
strptime (3) - convert a string representation of time to a time tm s...
strrchr (3) - locate character in string
strrchr (9) - Find the last occurrence of a character in a string
strreplace (9) - Replace all occurrences of character in string.
strscpy (9) - Copy a C-string into a sized buffer
strsep (3) - extract token from string
strsep (9) - Split a string into tokens
strsignal (3) - return string describing signal
strspn (3) - get length of a prefix substring
strspn (9) - Calculate the length of the initial substring of s whi...
strstr (3) - locate a substring
strstr (9) - Find the first substring in a NUL terminated string
strtod (3) - convert ASCII string to floating-point number
strtof (3) - convert ASCII string to floating-point number
strtoimax (3) - convert string to integer
strtok (3) - extract tokens from strings
strtok_r (3) - extract tokens from strings
strtol (3) - convert a string to a long integer
strtold (3) - convert ASCII string to floating-point number
strtoll (3) - convert a string to a long integer
strtoq (3) - convert a string to a long integer
strtoul (3) - convert a string to an unsigned long integer
strtoull (3) - convert a string to an unsigned long integer
strtoumax (3) - convert string to integer
strtouq (3) - convert a string to an unsigned long integer
struct_ablkcipher_alg (9) - asynchronous block cipher definition
struct_aead_alg (9) - AEAD cipher definition
struct_aead_request (9) - AEAD request
struct_ahash_alg (9) - asynchronous message digest definition
struct_akcipher_alg (9) - generic public key algorithm
struct_akcipher_request (9) - public key request
struct_blkcipher_alg (9) - synchronous block cipher definition
struct_bss_parameters (9) - BSS parameters
struct_bus_type (9) - The bus type of the device
struct_ccw1 (9) - channel command word
struct_ccw_dev_id (9) - unique identifier for ccw devices
struct_ccw_device (9) - channel attached device
struct_ccw_driver (9) - device driver for channel attached devices
struct_ccwgroup_device (9) - ccw group device
struct_ccwgroup_driver (9) - driver for ccw group devices
struct_cfg80211_ap_settings (9) - AP configuration
struct_cfg80211_assoc_request (9) - (Re)Association request data
struct_cfg80211_auth_request (9) - Authentication request data
struct_cfg80211_beacon_data (9) - beacon data
struct_cfg80211_bss (9) - BSS description
struct_cfg80211_connect_params (9) - Connection parameters
struct_cfg80211_crypto_settings (9) - Crypto settings
struct_cfg80211_deauth_request (9) - Deauthentication request data
struct_cfg80211_disassoc_request (9) - Disassociation request data
struct_cfg80211_ibss_params (9) - IBSS parameters
struct_cfg80211_inform_bss (9) - BSS inform data
struct_cfg80211_ops (9) - backend description for wireless configuration
struct_cfg80211_pmksa (9) - PMK Security Association
struct_cfg80211_scan_request (9) - scan request description
struct_cfg80211_ssid (9) - SSID description
struct_cipher_alg (9) - single-block symmetric ciphers definition
struct_ciw (9) - command information word (CIW) layout
struct_class (9) - device classes
struct_clk_notifier (9) - associate a clk with a notifier
struct_clk_notifier_data (9) - rate data to pass to the notifier callback
struct_crypto_alg (9) - definition of a cryptograpic cipher algorithm
struct_debug_obj (9) - representaion of an tracked object
struct_debug_obj_descr (9) - object type specific debug description structure
struct_device (9) - The basic device structure
struct_device_driver (9) - The basic device driver structure
struct_dma_buf (9) - shared buffer object
struct_dma_buf_attachment (9) - holds device-buffer attachment data
struct_dma_buf_export_info (9) - holds information needed to export a dma_buf
struct_dma_buf_ops (9) - operations possible on struct dma_buf
struct_erw (9) - extended report word
struct_erw_eadm (9) - EADM Subchannel extended report word
struct_esw0 (9) - Format 0 Extended Status Word (ESW)
struct_esw1 (9) - Format 1 Extended Status Word (ESW)
struct_esw2 (9) - Format 2 Extended Status Word (ESW)
struct_esw3 (9) - Format 3 Extended Status Word (ESW)
struct_esw_eadm (9) - EADM Subchannel Extended Status Word (ESW)
struct_fence (9) - software synchronization primitive
struct_fence_array (9) - fence to represent an array of fences
struct_fence_array_cb (9) - callback helper for fence array
struct_fence_cb (9) - callback for fence_add_callback
struct_fence_ops (9) - operations implemented for fence
struct_ff_device (9) - force-feedback part of an input device
struct_futex_q (9) - The hashed futex queue entry, one per waiting task
struct_gnet_estimator (9) - rate estimator configuration
struct_gnet_stats_basic (9) - byte/packet throughput statistics
struct_gnet_stats_queue (9) - queuing statistics
struct_gnet_stats_rate_est (9) - rate estimator
struct_gnet_stats_rate_est64 (9) - rate estimator
struct_hash_alg_common (9) - define properties of message digest
struct_hrtimer (9) - the basic hrtimer structure
struct_hrtimer_clock_base (9) - the timer base for a specific clock
struct_hrtimer_sleeper (9) - simple sleeper structure
struct_hsi_board_info (9) - HSI client board info
struct_hsi_channel (9) - channel resource used by the hsi clients
struct_hsi_client (9) - HSI client attached to an HSI port
struct_hsi_client_driver (9) - Driver associated to an HSI client
struct_hsi_config (9) - Configuration for RX/TX HSI modules
struct_hsi_controller (9) - HSI controller device
struct_hsi_msg (9) - HSI message descriptor
struct_hsi_port (9) - HSI port device
struct_i2c_adapter_quirks (9) - describe flaws of an i2c adapter
struct_i2c_algorithm (9) - represent I2C transfer method
struct_i2c_board_info (9) - template for device creation
struct_i2c_bus_recovery_info (9) - I2C bus recovery information
struct_i2c_client (9) - represent an I2C slave device
struct_i2c_driver (9) - represent an I2C device driver
struct_i2c_timings (9) - I2C timing information
struct_ieee80211_channel (9) - channel definition
struct_ieee80211_conf (9) - configuration of the device
struct_ieee80211_hw (9) - hardware information and state
struct_ieee80211_iface_combination (9) - possible interface combination
struct_ieee80211_iface_limit (9) - limit on certain interface types
struct_ieee80211_key_conf (9) - key information
struct_ieee80211_ops (9) - callbacks from mac80211 to the driver
struct_ieee80211_radiotap_iterator (9) - tracks walk thru present radiotap args
struct_ieee80211_rate (9) - bitrate definition
struct_ieee80211_rx_status (9) - receive status
struct_ieee80211_sta (9) - station table entry
struct_ieee80211_sta_ht_cap (9) - STA's HT capabilities
struct_ieee80211_supported_band (9) - frequency band definition
struct_ieee80211_tpt_blink (9) - throughput blink description
struct_ieee80211_tx_info (9) - skb transmit information
struct_ieee80211_tx_queue_params (9) - transmit queue configuration
struct_ieee80211_tx_rate (9) - rate selection/status
struct_ieee80211_tx_rate_control (9) - rate control information for/from RC algo
struct_ieee80211_txq_params (9) - TX queue parameters
struct_ieee80211_vif (9) - per-interface data
struct_iio_buffer (9) - general buffer structure
struct_iio_buffer_setup_ops (9) - buffer setup related callbacks
struct_iio_chan_spec (9) - specification of a single channel
struct_iio_dev (9) - industrial I/O device
struct_iio_trigger (9) - industrial I/O trigger device
struct_iio_trigger_ops (9) - operations structure for an iio_trigger.
struct_input_dev (9) - represents an input device
struct_input_handle (9) - links input device with an input handler
struct_input_handler (9) - implements one of interfaces for input devices
struct_input_mt (9) - state of tracked contacts
struct_input_mt_pos (9) - contact position
struct_input_mt_slot (9) - represents the state of an input MT slot
struct_input_polled_dev (9) - simple polled input device
struct_input_value (9) - input value representation
struct_irb (9) - interruption response block
struct_irq_affinity_notify (9) - context for notification of IRQ affinity cha...
struct_irq_chip (9) - hardware interrupt chip descriptor
struct_irq_chip_generic (9) - Generic irq chip data structure
struct_irq_chip_regs (9) - register offsets for struct irq_gci
struct_irq_chip_type (9) - Generic interrupt chip instance for a flow type
struct_irq_common_data (9) - per irq data shared by all irqchips
struct_irq_data (9) - per irq chip data passed down to chip functions
struct_irqaction (9) - per interrupt action descriptor
struct_jbd2_inode (9) - (unknown subject)
struct_jbd2_journal_handle (9) - The handle_s type is the concrete type assoc...
struct_journal_s (9) - The journal_s type is the concrete type associated wit...
struct_key_entry (9) - keymap entry for use in sparse keymap
struct_key_params (9) - key information
struct_kgdb_arch (9) - Describe architecture specific values.
struct_kgdb_io (9) - Describe the interface for an I/O driver to talk with ...
struct_matrix_keymap_data (9) - keymap for matrix keyboards
struct_matrix_keypad_platform_data (9) - platform-dependent keypad data
struct_mpath_info (9) - mesh path information
struct_nand_buffers (9) - buffer structure for read/write
struct_nand_chip (9) - NAND Private Flash Chip Data
struct_nand_ecc_ctrl (9) - Control structure for ECC
struct_nand_flash_dev (9) - NAND Flash Device ID Structure
struct_nand_hw_control (9) - Control structure for hardware controller (e.g E...
struct_nand_manufacturers (9) - NAND Flash Manufacturer ID Structure
struct_net_device (9) - The DEVICE structure. Actually, this whole structure ...
struct_pipe_buffer (9) - a linux kernel pipe buffer
struct_pipe_inode_info (9) - a linux kernel pipe
struct_platform_nand_chip (9) - chip level device structure
struct_platform_nand_ctrl (9) - controller level device structure
struct_platform_nand_data (9) - container structure for platform-specific data
struct_pre_voltage_change_data (9) - Data sent with PRE_VOLTAGE_CHANGE event
struct_prev_cputime (9) - snaphsot of system and user cputime
struct_pwm_args (9) - board-dependent PWM arguments
struct_pwm_capture (9) - PWM capture data
struct_pwm_chip (9) - abstract a PWM controller
struct_pwm_device (9) - PWM channel object
struct_pwm_ops (9) - PWM controller operations
struct_rate_info (9) - bitrate information
struct_regulation_constraints (9) - regulator operating constraints.
struct_regulator_bulk_data (9) - Data used for bulk regulator operations.
struct_regulator_config (9) - Dynamic regulator descriptor
struct_regulator_consumer_supply (9) - supply - > device mapping
struct_regulator_desc (9) - Static regulator descriptor
struct_regulator_init_data (9) - regulator platform initialisation data.
struct_regulator_linear_range (9) - specify linear voltage ranges
struct_regulator_ops (9) - regulator operations.
struct_regulator_state (9) - regulator state during low power system states
struct_reservation_object (9) - a reservation object manages fences for a buffer
struct_reservation_object_list (9) - a list of shared fences
struct_rio_dbell (9) - RIO doorbell event
struct_rio_dev (9) - RIO device info
struct_rio_driver (9) - RIO driver info
struct_rio_mport (9) - RIO master port info
struct_rio_mport_attr (9) - RIO mport device attributes
struct_rio_msg (9) - RIO message event
struct_rio_net (9) - RIO network info
struct_rio_ops (9) - Low-level RIO configuration space operations
struct_rio_scan (9) - RIO enumeration and discovery operations
struct_rio_scan_node (9) - list node to register RapidIO enumeration and disc...
struct_rio_switch (9) - RIO switch info
struct_rio_switch_ops (9) - Per-switch operations
struct_rng_alg (9) - random number generator definition
struct_rs_control (9) - rs control structure
struct_shash_alg (9) - synchronous message digest definition
struct_sk_buff (9) - socket buffer
struct_skb_mstamp (9) - multi resolution time stamps
struct_skb_shared_hwtstamps (9) - hardware time stamps
struct_snd_compr (9) - (unknown subject)
struct_snd_compr_avail (9) - avail descriptor
struct_snd_compr_caps (9) - caps descriptor
struct_snd_compr_codec_caps (9) - query capability of codec
struct_snd_compr_metadata (9) - compressed stream metadata
struct_snd_compr_ops (9) - (unknown subject)
struct_snd_compr_params (9) - compressed stream params
struct_snd_compr_runtime (9) - (unknown subject)
struct_snd_compr_stream (9) - (unknown subject)
struct_snd_compr_tstamp (9) - timestamp descriptor
struct_snd_compressed_buffer (9) - compressed buffer
struct_snd_dmaengine_dai_dma_data (9) - DAI DMA configuration data
struct_snd_dmaengine_pcm_config (9) - Configuration data for dmaengine based PCM
struct_snd_enc_flac (9) - (unknown subject)
struct_snd_enc_real (9) - (unknown subject)
struct_snd_enc_vorbis (9) - (unknown subject)
struct_snd_soc_jack_gpio (9) - Describes a gpio pin for jack detection
struct_snd_soc_jack_pin (9) - Describes a pin to update based on jack detection
struct_snd_soc_jack_zone (9) - Describes voltage zones of jack detection
struct_sock (9) - network layer representation of sockets
struct_sock_common (9) - minimal network layer representation of sockets
struct_socket (9) - general BSD socket
struct_spi_board_info (9) - board-specific template for a SPI device
struct_spi_device (9) - Master side proxy for an SPI slave device
struct_spi_driver (9) - Host side “protocol” driver
struct_spi_flash_read_message (9) - flash specific information for spi-master...
struct_spi_master (9) - interface to SPI master controller
struct_spi_message (9) - one multi-segment SPI transaction
struct_spi_replaced_transfers (9) - structure describing the spi_transfer rep...
struct_spi_res (9) - spi resource management structure
struct_spi_statistics (9) - statistics for spi transfers
struct_spi_transfer (9) - a read/write buffer pair
struct_sta_ampdu_mlme (9) - STA aggregation information.
struct_sta_info (9) - STA information
struct_station_info (9) - station information
struct_station_parameters (9) - station parameters
struct_sublog (9) - subchannel logout area
struct_subsys_interface (9) - interfaces to device functions
struct_survey_info (9) - channel survey response
struct_sync_file (9) - sync file to export to the userspace
struct_task_cputime (9) - collected CPU time counts
struct_thread_group_cputimer (9) - thread group interval timer counts
struct_tid_ampdu_rx (9) - TID aggregation information (Rx).
struct_tid_ampdu_tx (9) - TID aggregation information (Tx).
struct_uio_info (9) - UIO device capabilities
struct_uio_mem (9) - description of a UIO memory region
struct_uio_port (9) - description of a UIO port region
struct_urb (9) - USB Request Block
struct_usb_class_driver (9) - identifies a USB driver that wants to use the U...
struct_usb_composite_dev (9) - represents one composite usb gadget
struct_usb_composite_driver (9) - groups configurations into a gadget
struct_usb_configuration (9) - represents one gadget configuration
struct_usb_device (9) - kernel's representation of a USB device
struct_usb_device_driver (9) - identifies USB device driver to usbcore
struct_usb_driver (9) - identifies USB interface driver to usbcore
struct_usb_ep (9) - device side representation of USB endpoint
struct_usb_ep_caps (9) - endpoint capabilities description
struct_usb_function (9) - describes one function of a configuration
struct_usb_gadget (9) - represents a usb slave device
struct_usb_gadget_driver (9) - driver for usb 'slave' devices
struct_usb_gadget_strings (9) - a set of USB strings in a given language
struct_usb_host_config (9) - representation of a device's configuration
struct_usb_host_endpoint (9) - host-side endpoint descriptor and queue
struct_usb_interface (9) - what usb device drivers talk to
struct_usb_interface_cache (9) - long-term representation of a device interface
struct_usb_os_desc (9) - describes OS descriptors associated with one interface
struct_usb_os_desc_ext_prop (9) - describes one “Extended Property”
struct_usb_os_desc_table (9) - describes OS descriptors associated with one i...
struct_usb_request (9) - describes one i/o request
struct_usb_sg_request (9) - support for scatter/gather I/O
struct_usb_string (9) - wraps a C string and its USB id
struct_usbdrv_wrap (9) - wrapper for driver-model structure
struct_vif_params (9) - describes virtual interface parameters
struct_w1_async_cmd (9) - execute callback from the w1_process kthread
struct_w1_bus_master (9) - operations available on a bus master
struct_w1_family (9) - reference counted family structure.
struct_w1_family_ops (9) - operations for a family type
struct_w1_master (9) - one per bus master
struct_w1_netlink_cmd (9) - holds the command and data
struct_w1_netlink_msg (9) - holds w1 message type, id, and result
struct_w1_reg_num (9) - broken out slave device id
struct_w1_slave (9) - holds a single slave device on the bus
struct_wimax_dev (9) - Generic WiMAX device
struct_wiphy (9) - wireless hardware description
struct_wireless_dev (9) - wireless device state
strverscmp (3) - compare two version strings
strxfrm (3) - string transformation
stty (1) - change and print terminal line settings
stty (2) - unimplemented system calls
stunnel (8) - universal SSL tunnel
stunnel3 (8) - universal SSL tunnel
stunnel4 (8) - universal SSL tunnel
Sub::Defer (3pm) - defer generation of subroutines until they are first c...
Sub::Exporter (3pm) - a sophisticated exporter for custom-built routines
Sub::Exporter::Cookbook (3pm) - useful, demonstrative, or stupid Sub::Exporte...
Sub::Install (3pm) - install subroutines into packages easily
Sub::Quote (3pm) - efficient generation of subroutines via string eval
Sub::Uplevel (3pm) - apparently run a function in a higher stack frame
subsys_system_register (9) - register a subsystem at /sys/devices/system/
subsys_virtual_register (9) - register a subsystem at /sys/devices/virtual/
suexec-custom (8) - Switch User For Exec
suexec-pristine (8) - Switch user before executing external programs
suffixes (7) - list of file suffixes
superhyway_register_driver (9) - Register a new SuperHyway driver
superhyway_unregister_driver (9) - Unregister a SuperHyway driver
supervise (8) - starts and monitors a service.
svc_destroy (3) - library routines for remote procedure calls
svc_find_xprt (9) - find an RPC transport instance
svc_register (3) - library routines for remote procedure calls
svc_reserve (9) - change the space reserved for the reply to a request.
svc_unregister (3) - library routines for remote procedure calls
svc_xprt_names (9) - format a buffer with a list of transport names
svcerr_systemerr (3) - library routines for remote procedure calls
svipc (7) - System V interprocess communication mechanisms
svnadmin (1) - Subversion repository administration tool
svscan (8) - starts and monitors a collection of services
svscanboot (8) - starts svscan (8) in the /service directory, with outp...
svstat (8) - prints the status of services monitored by supervise (8).
swapoff (2) - start/stop swapping to file/device
swapon (2) - start/stop swapping to file/device
Switch (3pm) - A switch statement for Perl, do not use if you can use...
switch_root (8) - switch to another filesystem as the root of the mount ...
sync (1) - flush file system buffers
Sys::Hostname (3perl) - Try every conceivable way to get hostname
Sys::Hostname::Long (3pm) - Try every conceivable way to get full hostname
Sys::Syscall (3pm) - access system calls that Perl doesn't normally provide...
sys_errlist (3) - print a system error message
sys_flock (9) - flock system call.
sys_get_robust_list (9) - Get the robust-futex list head of a task
sys_nerr (3) - print a system error message
sys_restart_syscall (9) - restart a system call
sys_rt_sigprocmask (9) - change the list of currently blocked signals
sys_set_robust_list (9) - Set the robust-futex list head of a task
syscall (2) - indirect system call
syscalls (2) - Linux system calls
syscore_resume (9) - Execute all the registered system core resume callbacks.
syscore_suspend (9) - Execute all the registered system core suspend callbacks.
sysctl (2) - read/write system parameters
sysfs (2) - get filesystem type information
sysfs_add_file_to_group (9) - add an attribute file to a pre-existing group.
sysfs_create_file_ns (9) - create an attribute file for an object with custom ns
sysfs_remove_file_ns (9) - remove an object attribute with a custom ns tag
sysfs_streq (9) - return true if strings are equal, modulo trailing newline
sysinfo (2) - returns information on overall system statistics
syslog (3) - send messages to the system logger
sysstat (5) - sysstat configuration file.
system (3) - execute a shell command
systemctl (1) - Control the systemd system and service manager
systemd (1) - systemd system and service manager
systemd-activate (8) - Test socket activation of daemons
systemd-analyze (1) - Analyze system boot-up performance
systemd-ask-password (1) - Query the user for a system password
systemd-ask-password-console.path (8) - Query the user for system passwords o...
systemd-ask-password-console.service (8) - Query the user for system password...
systemd-ask-password-wall.path (8) - Query the user for system passwords on t...
systemd-ask-password-wall.service (8) - Query the user for system passwords o...
systemd-backlight (8) - Load and save the display backlight brightness at boo...
systemd-backlight@.service (8) - Load and save the display backlight brightne...
systemd-binfmt (8) - Configure additional binary formats for executables at...
systemd-binfmt.service (8) - Configure additional binary formats for executab...
systemd-bootchart (1) - Boot performance graphing tool
systemd-cat (1) - Connect a pipeline or program's output with the journal
systemd-cgls (1) - Recursively show control group contents
systemd-cgtop (1) - Show top control groups by their resource usage
systemd-cryptsetup (8) - Full disk decryption logic
systemd-cryptsetup-generator (8) - Unit generator for /etc/crypttab
systemd-cryptsetup@.service (8) - Full disk decryption logic
systemd-debug-generator (8) - Generator for enabling a runtime debug shell an...
systemd-delta (1) - Find overridden configuration files
systemd-detect-virt (1) - Detect execution in a virtualized environment
systemd-efi-boot-generator (8) - Generator for automatically mounting the EFI...
systemd-escape (1) - Escape strings for usage in system unit names
systemd-fsck (8) - File system checker logic
systemd-fsck-root.service (8) - File system checker logic
systemd-fsck@.service (8) - File system checker logic
systemd-fstab-generator (8) - Unit generator for /etc/fstab
systemd-getty-generator (8) - Generator for enabling getty instances on the c...
systemd-gpt-auto-generator (8) - Generator for automatically discovering and ...
systemd-halt.service (8) - System shutdown logic
systemd-hibernate.service (8) - System sleep state logic
systemd-hostnamed (8) - Host name bus mechanism
systemd-hostnamed.service (8) - Host name bus mechanism
systemd-hybrid-sleep.service (8) - System sleep state logic
systemd-inhibit (1) - Execute a program with an inhibition lock taken
systemd-initctl (8) - /dev/initctl compatibility
systemd-initctl.service (8) - /dev/initctl compatibility
systemd-initctl.socket (8) - /dev/initctl compatibility
systemd-journald (8) - Journal service
systemd-journald-dev-log.socket (8) - Journal service
systemd-journald.service (8) - Journal service
systemd-journald.socket (8) - Journal service
systemd-kexec.service (8) - System shutdown logic
systemd-localed (8) - Locale bus mechanism
systemd-localed.service (8) - Locale bus mechanism
systemd-logind (8) - Login manager
systemd-logind.service (8) - Login manager
systemd-machine-id-setup (1) - Initialize the machine ID in /etc/machine-id
systemd-machined (8) - Virtual machine and container registration manager
systemd-machined.service (8) - Virtual machine and container registration man...
systemd-modules-load (8) - Configure kernel modules to load at boot
systemd-modules-load.service (8) - Configure kernel modules to load at boot
systemd-networkd (8) - Network manager
systemd-networkd-wait-online (8) - Wait for network to come online
systemd-networkd-wait-online.service (8) - Wait for network to come online
systemd-networkd.service (8) - Network manager
systemd-notify (1) - Notify service manager about start-up completion and o...
systemd-nspawn (1) - Spawn a namespace container for debugging, testing and...
systemd-path (1) - List and query system and user paths
systemd-poweroff.service (8) - System shutdown logic
systemd-quotacheck (8) - File system quota checker logic
systemd-quotacheck.service (8) - File system quota checker logic
systemd-random-seed (8) - Load and save the system random seed at boot and sh...
systemd-random-seed.service (8) - Load and save the system random seed at boo...
systemd-readahead (8) - Disk read ahead logic
systemd-readahead-collect.service (8) - Disk read ahead logic
systemd-readahead-done.service (8) - Disk read ahead logic
systemd-readahead-done.timer (8) - Disk read ahead logic
systemd-readahead-replay.service (8) - Disk read ahead logic
systemd-reboot.service (8) - System shutdown logic
systemd-remount-fs (8) - Remount root and kernel file systems
systemd-remount-fs.service (8) - Remount root and kernel file systems
systemd-resolved (8) - Network Name Resolution manager
systemd-resolved.service (8) - Network Name Resolution manager
systemd-rfkill (8) - Load and save the RF kill switch state at boot and shu...
systemd-rfkill@.service (8) - Load and save the RF kill switch state at boot ...
systemd-run (1) - Run programs in transient scope or service units
systemd-shutdown (8) - System shutdown logic
systemd-shutdownd (8) - Scheduled shutdown service
systemd-shutdownd.service (8) - Scheduled shutdown service
systemd-shutdownd.socket (8) - Scheduled shutdown service
systemd-sleep (8) - System sleep state logic
systemd-sleep.conf (5) - Suspend and hibernation configuration file
systemd-socket-proxyd (8) - Bidirectionally proxy local sockets to another (p...
systemd-suspend.service (8) - System sleep state logic
systemd-sysctl (8) - Configure kernel parameters at boot
systemd-sysctl.service (8) - Configure kernel parameters at boot
systemd-system-update-generator (8) - Generator for redirecting boot to offli...
systemd-system.conf (5) - System and session service manager configuration file
systemd-sysusers (8) - Allocate system users and groups
systemd-sysusers.service (8) - Allocate system users and groups
systemd-timedated (8) - Time and date bus mechanism
systemd-timedated.service (8) - Time and date bus mechanism
systemd-timesyncd (8) - Network Time Synchronization
systemd-timesyncd.service (8) - Network Time Synchronization
systemd-tmpfiles (8) - Creates, deletes and cleans up volatile and temporary ...
systemd-tmpfiles-clean.service (8) - Creates, deletes and cleans up volatile ...
systemd-tmpfiles-clean.timer (8) - Creates, deletes and cleans up volatile an...
systemd-tmpfiles-setup-dev.service (8) - Creates, deletes and cleans up volat...
systemd-tmpfiles-setup.service (8) - Creates, deletes and cleans up volatile ...
systemd-tty-ask-password-agent (1) - List or process pending systemd password...
systemd-udevd (8) - Device event managing daemon
systemd-udevd-control.socket (8) - Device event managing daemon
systemd-udevd-kernel.socket (8) - Device event managing daemon
systemd-udevd.service (8) - Device event managing daemon
systemd-update-utmp (8) - Write audit and utmp updates at bootup, runlevel ch...
systemd-update-utmp-runlevel.service (8) - Write audit and utmp updates at bo...
systemd-update-utmp.service (8) - Write audit and utmp updates at bootup, run...
systemd-user-sessions (8) - Permit user logins after boot, prohibit user logi...
systemd-user-sessions.service (8) - Permit user logins after boot, prohibit u...
systemd-user.conf (5) - System and session service manager configuration file
systemd.automount (5) - Automount unit configuration
systemd.device (5) - Device unit configuration
systemd.directives (7) - Index of configuration directives
systemd.exec (5) - Execution environment configuration
systemd.index (7) - List all manpages from the systemd project
systemd.journal-fields (7) - Special journal fields
systemd.kill (5) - Process killing procedure configuration
systemd.link (5) - Network device configuration
systemd.mount (5) - Mount unit configuration
systemd.netdev (5) - Virtual Network Device configuration
systemd.network (5) - Network configuration
systemd.path (5) - Path unit configuration
systemd.preset (5) - Service enablement presets
systemd.resource-control (5) - Resource control unit settings
systemd.scope (5) - Scope unit configuration
systemd.service (5) - Service unit configuration
systemd.slice (5) - Slice unit configuration
systemd.snapshot (5) - Snapshot unit configuration
systemd.socket (5) - Socket unit configuration
systemd.special (7) - Special systemd units
systemd.swap (5) - Swap unit configuration
systemd.target (5) - Target unit configuration
systemd.time (7) - Time and date specifications
systemd.timer (5) - Timer unit configuration
systemd.unit (5) - Unit configuration
sysusers.d (5) - Declarative allocation of system users and groups
sysv_signal (3) - signal handling with System V semantics
tai64n (8) - puts a precise timestamp on each line.
tai64nlocal (8) - converts precise TAI64N timestamps to a human-readable...
tail (1) - output the last part of files
TAILQ_ENTRY (3) - implementations of lists, tail queues, and circular qu...
TAILQ_HEAD (3) - implementations of lists, tail queues, and circular qu...
TAILQ_INIT (3) - implementations of lists, tail queues, and circular qu...
TAILQ_INSERT_AFTER (3) - implementations of lists, tail queues, and circular ...
TAILQ_INSERT_HEAD (3) - implementations of lists, tail queues, and circular q...
TAILQ_INSERT_TAIL (3) - implementations of lists, tail queues, and circular q...
TAILQ_REMOVE (3) - implementations of lists, tail queues, and circular qu...
TAP::Formatter::Color (3perl) - Run Perl test scripts with color
TAP::Formatter::Session (3perl) - Abstract base class for harness output dele...
TAP::Harness (3perl) - Run test scripts with statistics
TAP::Harness::Beyond (3perl) - Beyond make test
TAP::Parser::Grammar (3perl) - A grammar for the Test Anything Protocol.
TAP::Parser::Iterator::Stream (3perl) - Iterator for filehandle-based TAP sou...
TAP::Parser::Result::Test (3perl) - Test result token.
TAP::Parser::Scheduler (3perl) - Schedule tests during parallel testing
TAP::Parser::Scheduler::Job (3perl) - A single testing job.
TAP::Parser::SourceHandler::Executable (3perl) - Stream output from an execut...
TAP::Parser::SourceHandler::File (3perl) - Stream TAP from a text file.
TAP::Parser::SourceHandler::Handle (3perl) - Stream TAP from an IO::Handle or...
TAP::Parser::SourceHandler::Perl (3perl) - Stream TAP from a Perl executable
TAP::Parser::SourceHandler::RawTAP (3perl) - Stream output from raw TAP in a ...
task_participate_group_stop (9) - participate in a group stop
tasksel (8) - a user interface for installing tasks
tc-bfifo (8) - Packet limited First In, First Out queue
tc-pfifo (8) - Packet limited First In, First Out queue
tc-sfb (8) - Stochastic Fair Blue
tc-sfq (8) - Stochastic Fairness Queueing
tc-stab (8) - Generic size table manipulations
tcp_table (5) - Postfix client/server table lookup protocol
tcpcat (1) - prints data from a remote host.
tcptraceroute (8) - print the route packets trace to network host
tcptraceroute.db (8) - print the route packets trace to network host
tdestroy (3) - manage a binary tree
tee (1) - read from standard input and write to standard output ...
telldir (3) - return current location in directory stream
Term::ReadLine (3perl) - Perl interface to various "readline" packages. If no...
termio (7) - System V terminal driver interface
test (1) - check file types and compare values
Test::Builder (3perl) - Backend for building test libraries
Test::Builder::Module (3perl) - Base class for test modules
Test::Builder::Tester (3perl) - test testsuites that have been built with Tes...
Test::Builder::Tester::Color (3perl) - turn on colour in Test::Builder::Tester
Test::Class (3pm) - Easily create test classes in an xUnit/JUnit style
Test::Class::Load (3pm) - Load "Test::Class" classes automatically.
Test::Class::MethodInfo (3pm) - the info associated with a test method
Test::Class::Most (3pm) - Test Classes the easy way
Test::Deep (3pm) - Extremely flexible deep comparison
Test::Deep::NoTest (3pm) - Use Test::Deep outside of the testing framework
Test::Differences (3pm) - Test strings and data structures and show differenc...
Test::Exception (3pm) - Test exception based code
Test::Harness (3perl) - Run Perl standard test scripts with statistics
Test::LongString (3pm) - tests strings for equality, with more helpful failures
Test::Moose (3pm) - Test functions for Moose specific features
Test::More (3perl) - yet another framework for writing test scripts
Test::Most (3pm) - Most commonly needed test functions and features.
Test::Most::Exception (3pm) - Internal exception class
Test::Simple (3perl) - Basic utilities for writing tests.
Test::Tutorial (3perl) - A tutorial about writing really basic tests
Test::TypeTiny (3pm) - useful functions for testing the efficacy of type cons...
Test::Warn (3pm) - Perl extension to test methods for warnings
test_and_change_bit (9) - Change a bit and return its old value
test_and_clear_bit (9) - Clear a bit and return its old value
test_and_set_bit (9) - Set a bit and return its old value
test_and_set_bit_lock (9) - Set a bit and return its old value for lock
test_bit (9) - Determine whether a bit is set
testparm (1) - check an smb.conf configuration file for internal corr...
testrb (1) - Automatic runnter for Test::Unit of Ruby
testrb2.1 (1) - Automatic runnter for Test::Unit of Ruby
Text::Abbrev (3perl) - abbrev - create an abbreviation table from a list
Text::Balanced (3perl) - Extract delimited text sequences from strings.
Text::CharWidth (3pm) - Get number of occupied columns of a string on terminal
thaw_bdev (9) - - unlock filesystem
thaw_super (9) - - unlock filesystem
threads::shared (3perl) - Perl extension for sharing data structures between ...
Tie::StdHandle (3perl) - base class definitions for tied handles
Tie::Hash (3perl) - base class definitions for tied hashes
Tie::Scalar (3perl) - base class definitions for tied scalars
Tie::SubstrHash (3perl) - Fixed-table-size, fixed-key-length hashing
timedatectl (1) - Control the system time and date
timer_gettime (2) - arm/disarm and fetch state of POSIX per-process timer
timer_settime (2) - arm/disarm and fetch state of POSIX per-process timer
tload (1) - graphic representation of system load average
tlsmgr (8postfix) - Postfix TLS session cache and PRNG manager
tlsproxy (8postfix) - Postfix TLS proxy
tmpfs (5) - variables that configure tmpfs filesystems mounted dur...
to_fence_array (9) - cast a fence to a fence_array
to_seqno_fence (9) - cast a fence to a seqno_fence
touch (1) - change file timestamps
trace (8postfix) - Postfix delivery status reports
trace_block_bio_backmerge (9) - merging block operation to the end of an exis...
trace_block_bio_frontmerge (9) - merging block operation to the beginning of ...
trace_block_bio_remap (9) - map request for a logical device to the raw device
trace_block_getrq (9) - get a free request entry in queue for block IO operat...
trace_block_plug (9) - keep operations requests in request queue
trace_block_rq_abort (9) - abort block operation request
trace_block_rq_insert (9) - insert block operation request into queue
trace_block_rq_issue (9) - issue pending block IO request operation to device...
trace_block_rq_remap (9) - map request for a block operation request
trace_block_rq_requeue (9) - place block IO request back on a queue
trace_block_sleeprq (9) - waiting to get a free request entry in queue for bl...
trace_block_split (9) - split a single bio struct into two bio structs
trace_block_unplug (9) - release of operations requests in request queue
trace_puts (9) - write a string into the ftrace buffer
trace_workqueue_execute_start (9) - called immediately before the workqueue c...
traceproto (1) - print the route packets trace to network host
traceproto.db (1) - print the route packets trace to network host
traceroute (1) - print the route packets trace to network host
traceroute-nanog (1) - print the route packets trace to network host
traceroute.db (1) - print the route packets trace to network host
traceroute6 (1) - print the route packets trace to network host
traceroute6.db (1) - print the route packets trace to network host
transport (5) - Postfix transport table format
transport_class_register (9) - register an initial transport class
transport_class_unregister (9) - unregister a previously registered class
transport_destroy_device (9) - destroy a removed device
tree (1) - list contents of directories in a tree-like format.
trivial-rewrite (8postfix) - Postfix address rewriting and resolving daemon
troff (1) - the troff processor of the groff text formatting system
truncate_inode_pages_range (9) - truncate range of pages specified by start &...
try-from (8) - test program for the tcp_wrapper
try_to_writeback_inodes_sb (9) - try to start writeback if none underway
try_to_writeback_inodes_sb_nr (9) - try to start writeback if none underway
ts (1ssl) - Time Stamping Authority tool (client/server)
tsget (1ssl) - Time Stamping HTTP/HTTPS client
tty (1) - print the file name of the terminal connected to stand...
tune2fs (8) - adjust tunable filesystem parameters on ext2/ext3/ext4...
tuxcall (2) - unimplemented system calls
Type::Coercion (3pm) - a set of coercions to a particular target type constraint
Type::Coercion::Union (3pm) - a set of coercions to a union type constraint
Type::Params (3pm) - Params::Validate-like parameter validation using Type:...
Type::Parser (3pm) - parse type constraint strings
Type::Registry (3pm) - a glorified hashref for looking up type constraints
Type::Tiny (3pm) - tiny, yet Moo(se)-compatible type constraint
Type::Tiny::Class (3pm) - type constraints based on the "isa" method
Type::Tiny::Duck (3pm) - type constraints based on the "can" method
Type::Tiny::Enum (3pm) - string enum type constraints
Type::Tiny::Intersection (3pm) - intersection type constraints
Type::Tiny::Manual::Coercions (3pm) - adding coercions to type constraints
Type::Tiny::Manual::Optimization (3pm) - squeeze the most out of your CPU
Type::Tiny::Role (3pm) - type constraints based on the "DOES" method
Type::Tiny::Union (3pm) - union type constraints
Type::Tiny::XS (3pm) - provides an XS boost for some of Type::Tiny's built-in...
Type::Utils (3pm) - utility functions to make defining and using type cons...
typedef_journal_t (9) - The journal_t maintains all of the journaling state i...
Types::Common::String (3pm) - drop-in replacement for MooseX::Types::Common::...
Types::Standard (3pm) - bundled set of built-in types for Type::Tiny
Types::Standard::ArrayRef (3pm) - internals for the Types::Standard ArrayRef ...
Types::Standard::Dict (3pm) - internals for the Types::Standard Dict type con...
Types::Standard::HashRef (3pm) - internals for the Types::Standard HashRef ty...
Types::Standard::Map (3pm) - internals for the Types::Standard Map type const...
Types::Standard::ScalarRef (3pm) - internals for the Types::Standard ScalarRe...
Types::Standard::Tuple (3pm) - internals for the Types::Standard Tuple type c...
Types::TypeTiny (3pm) - type constraints used internally by Type::Tiny
uart_add_one_port (9) - attach a driver-defined port structure
uart_handle_cts_change (9) - handle a change of clear-to-send state
uart_handle_dcd_change (9) - handle a change of carrier detect state
uart_register_driver (9) - register a driver with the uart core layer
uart_remove_one_port (9) - detach a driver defined port structure
uart_unregister_driver (9) - remove a driver from the uart core layer
ucfr (1) - Update Configuration File Registry: associate packages...
UI_add_error_string (3ssl) - New User Interface
UI_add_info_string (3ssl) - New User Interface
UI_add_input_string (3ssl) - New User Interface
UI_add_verify_string (3ssl) - New User Interface
UI_construct_prompt (3ssl) - New User Interface
UI_dup_error_string (3ssl) - New User Interface
UI_dup_info_string (3ssl) - New User Interface
UI_dup_input_string (3ssl) - New User Interface
UI_dup_verify_string (3ssl) - New User Interface
uio_unregister_device (9) - unregister a industrial IO device
umount (2) - unmount filesystem
umount (8) - unmount file systems
umount2 (2) - unmount filesystem
uname (1) - print system information
uncolor (1p) - strip input from attached colors and attributes
ungetc (3) - input of characters and strings
ungetwc (3) - push back a wide character onto a FILE stream
Unicode::Collate::CJK::Stroke (3perl) - weighting CJK Unified Ideographs for ...
Unicode::Collate::Locale (3perl) - Linguistic tailoring for DUCET via Unicode...
unicode_start (1) - put keyboard and console in unicode mode
unicode_stop (1) - revert keyboard and console from unicode mode
unimplemented (2) - unimplemented system calls
UNLISTEN (7) - stop listening for a notification
unlock_new_inode (9) - clear the I_NEW state and wake up any waiters
unlock_sock_fast (9) - complement of lock_sock_fast
unlocked_stdio (3) - nonlocking stdio functions
unlockpt (3) - unlock a pseudoterminal master/slave pair
unregister_adapter_interrupt (9) - unregister adapter interrupt handler
unregister_chrdev_region (9) - unregister a range of device numbers
unregister_filesystem (9) - unregister a file system
unregister_framebuffer (9) - releases a frame buffer device
unregister_netdev (9) - remove device from the kernel
unregister_netdevice_many (9) - unregister many devices
unregister_netdevice_notifier (9) - unregister a network notifier block
unregister_netdevice_queue (9) - remove device from the kernel
unregister_node (9) - unregister a node device
unregister_sound_dsp (9) - unregister a DSP device
unregister_sound_midi (9) - unregister a midi device
unregister_sound_mixer (9) - unregister a mixer
unregister_sound_special (9) - unregister a special sound device
unregister_syscore_ops (9) - Unregister a set of system core operations.
unsq (1) - squeeze or unsqueeze a sorted word list
unzip (1) - list, test and extract compressed files in a ZIP archive
unzipsfx (1) - self-extracting stub for prepending to ZIP archives
update-binfmts (8) - maintain registry of executable binary formats
update-default-aspell (8) - rebuild aspell database and emacsen stuff
update-default-wordlist (8) - update default wordlist
update-dictcommon-aspell (8) - rebuild aspell database and emacsen stuff
update-dictcommon-hunspell (8) - rebuild hunspell database and emacsen stuff
update-dlocatedb (8) - generate text database of installed files for dlocate
update-grub (8) - stub for grub-mkconfig
update-grub2 (8) - stub for grub-mkconfig
update-java-alternatives (8) - update alternatives for jre/sdk installations
update-pciids (8) - download new version of the PCI ID list
update-rc.d (8) - install and remove System-V style init script links
update-service (8) - add/remove a service to/from system-wide service super...
update-usbids (8) - download new version of the USB ID list
update_sd_lb_stats (9) - Update sched_domain's statistics for load balancing.
update_sd_pick_busiest (9) - return 1 on busiest group
update_sg_lb_stats (9) - Update sched_group's statistics for load balancing.
uptime (1) - Tell how long the system has been running.
URI::_punycode (3pm) - encodes Unicode string in Punycode
URI::Heuristic (3pm) - Expand URI using heuristics
URI::Split (3pm) - Parse and compose URI strings
usb_add_hcd (9) - finish generic HCD structure initialization and register
usb_alloc_coherent (9) - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
usb_alloc_dev (9) - usb device constructor (usbcore-internal)
usb_alloc_streams (9) - allocate bulk endpoint stream IDs.
usb_altnum_to_altsetting (9) - get the altsetting structure with a given alte...
usb_buffer_dmasync_sg (9) - synchronize DMA and CPU view of scatterlist buffe...
usb_buffer_map_sg (9) - create scatterlist DMA mapping(s) for an endpoint
usb_buffer_unmap_sg (9) - free DMA mapping(s) for a scatterlist
usb_bus_start_enum (9) - start immediate enumeration (for OTG)
usb_clear_halt (9) - tells device to clear endpoint halt/stall condition
usb_composite_probe (9) - register a composite driver
usb_composite_unregister (9) - unregister a composite driver
usb_create_hcd (9) - create and initialize an HCD structure
usb_create_shared_hcd (9) - create and initialize an HCD structure
usb_deregister (9) - unregister a USB interface driver
usb_deregister_dev (9) - deregister a USB device's dynamic minor.
usb_deregister_device_driver (9) - unregister a USB device (not interface) dr...
usb_for_each_dev (9) - iterate over all USB devices in the system
usb_free_streams (9) - free bulk endpoint stream IDs.
usb_gadget_get_string (9) - fill out a string descriptor
usb_gadget_unregister_driver (9) - unregister a gadget driver
usb_get_descriptor (9) - issues a generic GET_DESCRIPTOR request
usb_get_dev (9) - increments the reference count of the usb device struc...
usb_get_from_anchor (9) - get an anchor's oldest urb
usb_get_intf (9) - increments the reference count of the usb interface st...
usb_get_maximum_speed (9) - Get maximum requested speed for a given USB contr...
usb_get_status (9) - issues a GET_STATUS call
usb_gstrings_attach (9) - attach gadget strings to a cdev and assign ids
usb_hc_died (9) - report abnormal shutdown of a host controller (bus glue)
usb_hcd_pci_shutdown (9) - shutdown host controller
usb_hub_clear_tt_buffer (9) - clear control/bulk TT state in high speed hub
usb_kill_anchored_urbs (9) - cancel transfer requests en masse
usb_kill_urb (9) - cancel a transfer request and wait for it to finish
usb_lock_device_for_reset (9) - cautiously acquire the lock for a usb device ...
usb_make_path (9) - returns stable device path in the usb tree
usb_match_id (9) - find first usb_device_id matching device or interface
usb_put_dev (9) - release a use of the usb device structure
usb_put_intf (9) - release a use of the usb interface structure
usb_register_dev (9) - register a USB device, and ask for a minor number
usb_register_device_driver (9) - register a USB device (not interface) driver
usb_register_driver (9) - register a USB interface driver
usb_reset_endpoint (9) - Reset an endpoint's state.
usb_root_hub_lost_power (9) - called by HCD if the root hub lost Vbus power
usb_set_device_state (9) - change a device's current state (usbcore, hcds)
usb_sg_cancel (9) - stop scatter/gather i/o issued by usb_sg_wait
usb_sg_init (9) - initializes scatterlist-based bulk/interrupt I/O request
usb_sg_wait (9) - synchronously execute scatter/gather request
usb_speed_string (9) - Returns human readable-name of the speed.
usb_state_string (9) - Returns human readable name for the state.
usb_string (9) - returns UTF-8 version of a string descriptor
usb_string_id (9) - allocate an unused string ID
usb_string_ids_n (9) - allocate unused string IDs in batch
usb_string_ids_tab (9) - allocate unused string IDs in batch
usb_submit_urb (9) - issue an asynchronous transfer request for an endpoint
usb_unlink_anchored_urbs (9) - asynchronously cancel transfer requests en masse
usb_unlink_urb (9) - abort/cancel a transfer request for an endpoint
User::Identity::Collection::Systems (3pm) - a collection of system descriptions
User::Identity::System (3pm) - physical system of a person
user_clusters (5) - File linking users to PostgreSQL clusters
users (1) - print the user names of users currently logged in to t...
ustat (2) - get filesystem statistics
utime (2) - change file last access and modification times
utimensat (2) - change file timestamps with nanosecond precision
utimes (2) - change file last access and modification times
va_arg (3) - variable argument lists
va_copy (3) - variable argument lists
va_end (3) - variable argument lists
va_start (3) - variable argument lists
vacuumdb (1) - garbage-collect and analyze a PostgreSQL database
vacuumlo (1) - remove orphaned large objects from a PostgreSQL database
validlocale (8) - Test if a given locale is available
vasprintf (3) - print to allocated string
vbin_printf (9) - Parse a format string and place args' binary value in ...
vcstime (8) - Show time in upper right hand corner of the console sc...
vdir (1) - list directory contents
verify (8postfix) - Postfix address verification server
vfs_rename (9) - rename a filesystem object
vfs_test_lock (9) - test file byte range lock
vfs_unlink (9) - unlink a filesystem object
vgcfgrestore (8) - restore volume group descriptor area
vgexport (8) - make volume groups unknown to the system
vgimport (8) - make exported volume groups known to the system
virtfs-proxy-helper (1) - QEMU 9p virtfs proxy filesystem helper
virtual (5) - Postfix virtual alias table format
virtual (8postfix) - Postfix virtual domain mail delivery agent
vm_unmap_aliases (9) - unmap outstanding lazy aliases in the vmap layer
vmcore-dmesg (8) - This is just a placeholder until real man page has bee...
vmstat (8) - Report virtual memory statistics
vorbiscomment (1) - List or edit comments in Ogg Vorbis files
vorbistagedit (1) - allows batch editing of vorbis comments with an editor
vpddecode (8) - VPD structure decoder
vscnprintf (9) - Format a string and place it in a buffer
vserver (2) - unimplemented system calls
vsnprintf (9) - Format a string and place it in a buffer
vsprintf (9) - Format a string and place it in a buffer
vsscanf (9) - Unformat a buffer into a list of arguments
vsyslog (3) - send messages to the system logger
w1_add_master_device (9) - registers a new master device
w1_next_pullup (9) - register for a strong pullup
w1_post_write (9) - post-write options
w1_process_callbacks (9) - execute each dev->async_list callback entry
w1_register_family (9) - register a device family driver
w1_remove_master_device (9) - unregister a master device
w1_reset_resume_command (9) - resume instead of another match ROM
w1_search (9) - Performs a ROM Search & registers any devices found.
w1_unregister_family (9) - unregister a device family driver
wait (2) - wait for process to change state
wait3 (2) - wait for process to change state, BSD style
wait4 (2) - wait for process to change state, BSD style
wait_for_stable_page (9) - wait for writeback to finish, if necessary.
wait_task_stopped (9) - Wait for TASK_STOPPED or TASK_TRACED
waitid (2) - wait for process to change state
waitpid (2) - wait for process to change state
waitqueue_active (9) - - locklessly test for waiters on the queue
warnings::register (3perl) - warnings import function
wcpcpy (3) - copy a wide-character string, returning a pointer to i...
wcpncpy (3) - copy a fixed-size string of wide characters, returning...
wcscasecmp (3) - compare two wide-character strings, ignoring case
wcscat (3) - concatenate two wide-character strings
wcschr (3) - search a wide character in a wide-character string
wcscmp (3) - compare two wide-character strings
wcscpy (3) - copy a wide-character string
wcscspn (3) - search a wide-character string for any of a set of wid...
wcsdup (3) - duplicate a wide-character string
wcslen (3) - determine the length of a wide-character string
wcsncasecmp (3) - compare two fixed-size wide-character strings, ignorin...
wcsncat (3) - concatenate two wide-character strings
wcsncmp (3) - compare two fixed-size wide-character strings
wcsncpy (3) - copy a fixed-size string of wide characters
wcsnlen (3) - determine the length of a fixed-size wide-character st...
wcsnrtombs (3) - convert a wide-character string to a multibyte string
wcspbrk (3) - search a wide-character string for any of a set of wid...
wcsrchr (3) - search a wide character in a wide-character string
wcsrtombs (3) - convert a wide-character string to a multibyte string
wcsspn (3) - advance in a wide-character string, skipping any of a ...
wcsstr (3) - locate a substring in a wide-character string
wcstoimax (3) - convert wide-character string to integer
wcstok (3) - split wide-character string into tokens
wcstombs (3) - convert a wide-character string to a multibyte string
wcstoumax (3) - convert wide-character string to integer
wcswidth (3) - determine columns needed for a fixed-size wide-charact...
wdctl (8) - show hardware watchdog status
who@ (1) - prints the list of active users on a remote host.
whois.conf (5) - alternative WHOIS servers list for whois client
wimax_dev_add (9) - Register a new WiMAX device
wimax_dev_init (9) - initialize a newly allocated instance
wimax_dev_rm (9) - Unregister an existing WiMAX device
wimax_rfkill (9) - Set the software RF switch state for a WiMAX device
wimax_state_change (9) - Set the current state of a WiMAX device
wimax_state_get (9) - Return the current state of a WiMAX device
wiphy_apply_custom_regulatory (9) - apply a custom driver regulatory domain
wiphy_register (9) - register a wiphy with cfg80211
wiphy_rfkill_set_hw_state (9) - notify cfg80211 about hw block state
wiphy_rfkill_start_polling (9) - start polling rfkill
wiphy_rfkill_stop_polling (9) - stop polling rfkill
wiphy_unregister (9) - deregister a wiphy from cfg80211
wmemset (3) - fill an array of wide-characters with a constant wide ...
wngloss (7WN) - glossary of terms used in WordNet system
wnpkgs (7WN) - description of various WordNet system packages
wnstats (7WN) - WordNet 3.0 database statistics
word-list-compress (1) - word list compressor/decompressor for GNU Aspell
work_busy (9) - test whether a work is currently pending or running
workqueue_congested (9) - test whether a workqueue is congested
workqueue_set_max_active (9) - adjust max_active of a workqueue
write_cache_pages (9) - walk the list of dirty pages of the given address spa...
write_zsctrl (9) - Write to a Z8530 control register
write_zsdata (9) - Write to a Z8530 control register
write_zsreg (9) - Write to a Z8530 channel register
WWW::RobotRules::AnyDBM_File (3pm) - Persistent RobotRules
X11::Protocol (3pm) - Perl module for the X Window System Protocol, version 11
X11::Protocol::Connection (3pm) - Perl module abstract base class for X11 cli...
X11::Protocol::Ext::BIG_REQUESTS (3pm) - Perl module for the X11 protocol Big...
X509_STORE_CTX_cleanup (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_free (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_get0_param (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_get1_chain (3ssl) - get or set certificate verification status...
X509_STORE_CTX_get_current_cert (3ssl) - get or set certificate verification ...
X509_STORE_CTX_get_error (3ssl) - get or set certificate verification status ...
X509_STORE_CTX_get_error_depth (3ssl) - get or set certificate verification s...
X509_STORE_CTX_get_ex_data (3ssl) - add application specific data to X509_STO...
X509_STORE_CTX_get_ex_new_index (3ssl) - add application specific data to X50...
X509_STORE_CTX_init (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_new (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_set0_crls (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_set0_param (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_set_cert (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_set_chain (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_set_default (3ssl) - X509_STORE_CTX initialisation
X509_STORE_CTX_set_error (3ssl) - get or set certificate verification status ...
X509_STORE_CTX_set_ex_data (3ssl) - add application specific data to X509_STO...
X509_STORE_CTX_set_verify_cb (3ssl) - set verification callback
X509_STORE_CTX_trusted_stack (3ssl) - X509_STORE_CTX initialisation
X509_STORE_set_verify_cb (3ssl) - set verification callback
X509_STORE_set_verify_cb_func (3ssl) - set verification callback
X509_verify_cert_error_string (3ssl) - get or set certificate verification st...
X509_VERIFY_PARAM_set_trust (3ssl) - X509 verification parameters
x86_64-linux-gnu-nm (1) - list symbols from object files
x86_64-linux-gnu-size (1) - list section sizes and total size.
x86_64-linux-gnu-strings (1) - print the strings of printable characters in f...
x86_64-linux-gnu-strip (1) - Discard symbols from object files.
xargs (1) - build and execute command lines from standard input
xcmsdb (1) - Device Color Characterization utility for X Color Mana...
xdg-desktop-icon (1) - command line tool for (un)installing icons to the desktop
xdg-desktop-menu (1) - command line tool for (un)installing desktop menu items
xdg-icon-resource (1) - command line tool for (un)installing icon resources
xdr_buf_trim (9) - lop at most “len” bytes off the end of “buf”
xdr_destroy (3) - library routines for external data representation
xdr_init_decode (9) - Initialize an xdr_stream for decoding data.
xdr_init_decode_pages (9) - Initialize an xdr_stream for decoding data.
xdr_init_encode (9) - Initialize a struct xdr_stream for sending data.
xdr_pmaplist (3) - library routines for remote procedure calls
xdr_restrict_buflen (9) - decrease available buffer space
xdr_stream_pos (9) - Return the current offset from the start of the xdr_st...
xdr_string (3) - library routines for external data representation
xdr_terminate_string (9) - '\0'-terminate a string residing in an xdr_buf
xdr_wrapstring (3) - library routines for external data representation
xdr_write_pages (9) - Insert a list of pages into an XDR buffer for sending
xdrstdio_create (3) - library routines for external data representation
xfs (5) - layout and mount options for the XFS filesystem
xfs_admin (8) - change parameters of an XFS filesystem
xfs_copy (8) - copy the contents of an XFS filesystem
xfs_db (8) - debug an XFS filesystem
xfs_estimate (8) - estimate the space that an XFS filesystem will take
xfs_freeze (8) - suspend access to an XFS filesystem
xfs_fsr (8) - filesystem reorganizer for XFS
xfs_growfs (8) - expand an XFS filesystem
xfs_info (8) - expand an XFS filesystem
xfs_io (8) - debug the I/O path of an XFS filesystem
xfs_logprint (8) - print the log of an XFS filesystem
xfs_mdrestore (8) - restores an XFS metadump image to a filesystem image
xfs_metadump (8) - copy XFS filesystem metadata to a file
xfs_quota (8) - manage use of quota on XFS filesystems
xfs_repair (8) - repair an XFS filesystem
xgettext (1) - extract gettext strings from source
xhost (1) - server access control program for X
xlsatoms (1) - list interned atoms defined on server
xlsclients (1) - list client applications running on a display
xlsfonts (1) - server font list displayer for X
xml2-config (1) - script to get information about the installed version ...
XML::Parser::Style::Debug (3pm) - Debug style for XML::Parser
XML::Parser::Style::Objects (3pm) - Objects styler parser
XML::Parser::Style::Stream (3pm) - Stream style for XML::Parser
XML::Parser::Style::Subs (3pm) - glue for handling element callbacks
XML::Parser::Style::Tree (3pm) - Tree style parser
XML::XPathEngine::Literal (3pm) - Simple string values.
XML::XPathEngine::NodeSet (3pm) - a list of XML document nodes
xmlif (1) - conditional processing instructions for XML
xmlto (1) - apply an XSL stylesheet to an XML document
xprt_adjust_cwnd (9) - adjust transport congestion window
xprt_complete_rqst (9) - called when reply processing is complete
xprt_lookup_rqst (9) - find an RPC request corresponding to an XID
xprt_register (3) - library routines for remote procedure calls
xprt_register_transport (9) - register a transport implementation
xprt_release_rqst_cong (9) - housekeeping when request is complete
xprt_release_xprt (9) - allow other requests to use a transport
xprt_release_xprt_cong (9) - allow other requests to use a transport
xprt_set_retrans_timeout_def (9) - set a request's retransmit timeout
xprt_set_retrans_timeout_rtt (9) - set a request's retransmit timeout
xprt_unregister (3) - library routines for remote procedure calls
xprt_unregister_transport (9) - unregister a transport implementation
xstdcmap (1) - X standard colormap utility
yes (1) - output a string repeatedly until killed
ypdomainname (1) - show or set the system's NIS/YP domain name
z8530_dma_status (9) - Handle a DMA status exception
z8530_rx_clear (9) - Handle RX events from a stopped chip
z8530_status (9) - Handle a PIO status exception
z8530_status_clear (9) - Handle status events from a stopped chip
z8530_tx_clear (9) - Handle TX events from a stopped chip
ZeroMQ::Constants (3pm) - ZeroMQ Constants
zipdetails (1) - display the internal structure of zip files
zipinfo (1) - list detailed information about a ZIP archive
zipnote (1) - write the comments in zipfile to stdout, edit comments...
zshcalsys (1) - zsh calendar system
zshcompsys (1) - zsh completion system
zshexpn (1) - zsh expansion and substitution
zshroadmap (1) - informal introduction to the zsh manual The Zsh Manual...
zshtcpsys (1) - zsh tcp system
zsoelim (1) - satisfy .so requests in roff input
|